Before using our iNAVI BLACK G100, please check the serial number written on the product warranty or
attached on the rear of the product and register your product with the serial number to our iNAVI home page.
Only registered users have access to a full range of customer support and after-service sales support.
(Any user who has not registered his/her product must have the product warranty with the purchase date to
access any type of support from iNAVI.)
This product is the vehicle drive recorder (VDR) that records the driving video of a car.
According to the driving conditions, vehicle type, and navigation environments, some functions
may not be supported. Functional support related to firmware updates for more reliable and
advanced quality may vary by product. In addition, please use this apparatus as a reference
to check the driving video since the video recording function may not work in some
environments or conditions.
Issue date: 28th Nov. 2011, Issued by: THINKWARE ACMA-0166KR103
To register your device, go to www.inavi.com [Log in and go to My Page – MY INAVI]
Before getting started with the iNAVI BLACK G100......
When requesting after-sales service support, you
must present the product warranty.
Register Your Device Now!
(The product warranty will be included upon product
purchase and cannot be issued again.)
iNAVI BLACK G100 is a trademark of THINKWARESYS©.
All descriptions and contents included in all of THINKWARE’s manuals are protected by relevant copyright laws.
All other products and services used in this manual are the registered trademarks of their respective owners.
All rights on this program are owned by THINKWARE and protected by relevant copyright laws. Any unauthorized copy,
replication, modification, reproduction, or distribution of this program without the prior written agreement of THINKWARE will
be subject to criminal prosecution, based on software relevant copyright laws, carrying the maximum penalty of a five-year jail
sentence and fine of 50 million KRW.
All description and contents provided in this manual are provided “AS-IS” and may include any technical or editorial omissions or errors.
For the purpose of performance improvement, the specifications and information regarding the iNAVI BLACK G100 in this manual
are subject to change without prior notice to users.
For the purpose of performance improvement, this manual is subject to change without prior notice to users.
Colors of images in this manual may be different from the actual screen colors due to the print quality.
In no event shall this product be used differently from its original purpose, nor arbitrarily changed. In accordance with the
“privacy Protection Laws and relevant laws’, if any others’ voice is recorded in this product using the recording function, the user
shall accept the liability for its recording.
CONTENTS
Chapter 01 I General Information
Product Features .......................................................................................................4
Safety Instructions .................................................................................................... 6
Components ............................................................................................................ 10
Part Names ............................................................................................................... 11
How to Install the Holder ................................................................................... 13
Chapter 02 I Basic Information
Basic Functions ....................................................................................................... 18
Chapter 03 I Menu
PC Viewer................................................................................................................... 39
Chapter 04 I Other Information
Product Specifications ......................................................................................... 70
Product Warranty .................................................................................................. 72
Chapter 01 I General
Product Features 4
Safety Instructions
Product 6
Power 8
Driving 9
Product Management &
Customer Support 9
Components
Basic Components 10
Optional Components 10
Part Name
Front/Rear 11
Left/Right 12
How to Install the Holder
How to Insert/
Remove Micro SD Memory Card 13
Product Features
2-Channel expansion that provides a
real-time view of front and rear images
and videos
iNAVI BLACK G100 supports expansion using
2-channels, allowing the clearer recording of
front/rear views by connecting a compatible rear
camera to the AV-IN port.
Real HD image quality with 2 megapixel
image sensor
2 megapixel image sensor with a high specication lens, supporting 1280X720 HD-resolution for
Real HD images and videos. (When 2 channels are
used, the front resolution is HD 1280X720 and the
rear resolution is VGA 640X480.)
Expansion to External GPS, recording
location and speed data as well as
video
iNAVI BLACK G100 can precisely record the
location and speed of your car by connecting an
external GPS. In addition, the PC Viewer software
allows you to view the driving path with the
recorded video by linking the driving speed
and longitude and latitude coordinates with the
iNAVI-provided map. (To use the GPS function,
use the iNAVI BLACK G100- compatible external
GPS (optional))
Micro SD memory allowing for easy
expansion and freedom of use
iNAVI BLACK E100 with its external micro SD
memory allows you to play and view whatever
video you record anywhere by simply inserting
the micro SD memory card into devices. In
addition, if required, you can easily expand
the memory capacity. Plus, it provides reliable
environment for using blackbox with its stable
recording feature veried by strict evaluation of
iNAVI (as memory is consumable component, its
lifespan may be reduced depending on environment) You can play and view the recorded video
by simply inserting Micro SD memory card into
smartphones or mobile multimedia device.
- Video codec supported: *.AVI / audio: *.PCM
(For smart device, you may need app sw that can
play the video)
- Codec supported is subjected to change
without notice depending on circumstances
3-axis impact sensor (G-SENSOR)
The built-in 3-axis Impact Sensor (G-SENSOR)
saves a separate event le.
L1$9,EODFN
ER[LVĕ
Panorama Security LED
A security LED that moves left and right acts as a
warning to prevent theft as well as giving a
desirable aesthetic eect.
3 Color LED Indicators
Built-in 3-color LED displays the product operation status.
Voice and BEEP sound guide
Alerts as to the operational status of the BLACK
BOX with voice-commands and Beep sounds.
Various recording functions for any situation
- Continuous Recording: Continuously creates recording les in the unit of one-minute
- Event (impact) Recording: Recording for 20 seconds; from 10 seconds before the event (impact) has
occurred to 10 seconds after that
- Manual Recording: Recording for 20 seconds; from 10 seconds before the button is pressed to 10 seconds
after that
- Parking Mode (Motion recording): recording 10 seconds before/after detecting motion
- Photo: Saves the desired moment as a photo le.
- Voice recording: The built-in high-performance microphone simultaneously records voice-data as well as
video.
In no event shall this product be used dierently
from its original purpose, nor arbitrarily changed.
In accordance with the “privacy Protection Laws
and relevant laws’, if any others’ voice is recorded
in this product using the recording function, the
user shall accept liability for its recording.
6 I
www.inavi.com
Indicates that violation of the
instruction may cause death or
serious human injury.
Indicates that violation of the
instruction may cause human
injury or damage of property.
Warning
Caution
Product
Safety Instructions
The following instructions are given to ensure your safety and prevent the loss
of property. Read them thoroughly and ensure the product is correctly used.
Adjust the angle of a camera
and check the recorded video
after mounting the product:
change of the mounting
may
change the angle of the
camera.
If the product is mounted on any
improper place, recording may not
be properly performed.
Do not use an excessive tint
on the front window through
solar control lms that disturb
clear video recording.
Some solar control lms may
cause the white-balance used in
video recording to change.
For best-quality video
recording, keep the front
window of your vehicle clean
before starting recording.
This product records driving
video using a camera. The
quality of video may be degraded in extreme situations,
such as when the brightness
changes rapidly, when entering
or exiting a tunnel, or when the
light is too strong, for example
at noon, or when there is no
light source, for example at
midnight.
When a product has been
damaged or lost due to a big
accident or a break in the
power supply to the product,
an accident video may not
be recorded.
Foreign materials (e.g.,
ngerprints) stained on the
black box lens may have a
negative impact on video
recording. Keep the lens clean.
www.inavi.com
I 7
Chapter 01 I General
Chapter 01 I General
Do not clean the product using
chemicals or detergent.
Just softly clean it with a cloth.
Keep the product out of reach
from children or pets for their
safety.
Otherwise, they may be seriously
wounded.
Do not drop the product nor disassemble without any direction of THINKWARE.
Do not press the Reset button with anything sharp.
It may result damage or failure of the product.
Safety Instructions
The best operation temperature
is 0~45˚C.
Please keep the temperature in
summer or winter to prevent any
problem.
If the product is used or
kept under 0˚C or over 45˚C,
malfunction or failure of the
product may occur.
Please pay attention to the
temperature of the place where the
product is stored.
Please ensure the product is
kept out of direct sunlight and
do not leave the product in the
sealed vehicle.
Failure to do so may result in product
failure.
Do not use the product in a
place where the temperature
and/or humidity is too high.
If the product is made wet by rain or
a beverage-spill, causing irreversible
damage, the user is liable for any
damage caused.
Use THINKWARE-sold articles
correctly.
THINKWARE is not liable for any
product damage or personal injuries
that occur due to accidents or the
incorrect use or operation of this
product.
Do not press the buttons with
too much pressure.
It may cause failure of the product.
8 I
www.inavi.com
Power
If the product is not be used for a long time, please detach the cigar jack cable from
the product.
Otherwise, the vehicle battery may be discharged or re may occur. The
user is liable for any
damage caused to the product or vehicle by the failure to observe the above warning
.
Do not touch the cigar jack
cable power cable with wet
hands.
This may result in electrical shock.
Insert the cigar jack cable until
it is stable.
Unstable connection may result
in re.
Do not use any damaged cigar
jack cable.
This may result in re or electric
shock.
Do not bend, pull, or press the
cigar jack cable with an excessive
power or anything heavy.
This may result in re or electric
shock.
Do not place the product or the
cigar jack power cable near to
the heat apparatus.
This may result in re or electric
shock.
Do not remodel or cut the cigar
jack cable.
This may result in damage to the
product or vehicle. The user is
liable for any damage caused to the
product or vehicle by the failure to
observe the above warning.
Safety Instructions
www.inavi.com
I 9
Chapter 01 I General
Chapter 01 I General
Driving
Do not operate the product
while you are driving.
You may be distracted, resulting in
a car accident.
Do not install the product in a
location that hinders your
driving or road-visibility.
This may result in an accident.
Product Management and Customer Support
If any problem is detected in
the product’s operation or such
a possibility exists, contact the
Customer Center.
Otherwise, the problem may
become serious and you cannot
be helped with customer service
successfully.
Be sure that the camera angle is
correct if the product has been
mounted and used for a long
time or used in a severe-vibrating
driving environment such as on
unpaved roads.
When the positioning of the
product or the camera angle is not
proper, the recording may not be
completed successfully.
THINKWARE does not guarantee
compatibility with third-party’s
devices and peripherals.
The user is liable for any damage or
failure caused by the unauthorized use of third-party devices or
peripherals.
Be careful that no foreign
materials enter the product or
cables.
Foreign materials in the product
may result in the malfunction or
failure of the product.
Safety Instructions
10 I
www.inavi.com
Vehicle Drive Recorder Holder Cigar Jack Cable Three Cable Holders
External GPS AV-OUT Cable Constant power cable Rear Camera
Micro SD reader USB Cable
3M double-
sided tape
Micro SD Memory Card (8GB) Micro SD Adaptor User Manual
Components
Basic Components
Optional Accessories
For the purpose of the improvement of the performance of quality of the product,
the components may be changed without any prior notice. You can order new
components at iNAVI Shopping Mall (http://mall.inavi.com).
www.inavi.com
I 11
Chapter 01 I General
Chapter 01 I General
Part Names
Name Description
Operation Status LED Displays the operation status of the product.
Security LED An aesthetic, security LED moving left and right to act as a warning and prevent theft.
Holder connector
Connects the black box to the holder (For how to mount the product to the holder, see page 14)
Speaker
Alerts as to the operational status of BLACK BOX through its voice-commands and Beep
sounds.
Camera Lens Records the front view as seen from the vehicle.
Set button Sets the operational status of the product.
Operation Button Executes recording modes and updates.
Power button Power ON/OFF (Pressed for more than 3 seconds)
Camera Lens
Security LED
Holder connector
Speaker
Power button
Set button
Operation Button
Operation Status
LED
Front Rear
The images presented here may be dierent from the product.
(For the purpose of the improvement of the performance of quality
of the product, the parts may be changed without any prior notice.)
12 I
www.inavi.com
Power IN Terminal
GPS terminal
USB terminal
A/V OUT Terminal
A/V IN Terminal
Micro SD Memory
Card Slot
GPS LED
A/V IN LED
Microphone
RESET
Left side Right side
Name Description
USB terminal
By interworking with iNAVI Navigation, it plays and manages the recorded video.
GPS terminal Connects the GPS antenna.
GPS LED Displays the GPS antenna connection status in yellow
A/V OUT
Terminal
Outputs the recorded video to the
external device.
A/V IN
Terminal
Connected to the external device (rear
camera).
Power IN
Terminal
Connects the power cable. Micro SD Memory Card Slot
The recorded video is
saved.
A/V IN LED Displays the external device (rear view) connection status in yellow.
Microphone A built-in microphone records the sound while recording the video.
RESET Press this to reboot the black box when operation is stopped and the function does not work
AV-IN/OUT terminal does not support the audio.
Part Names
www.inavi.com
I 13
Chapter 01 I General
Chapter 01 I General
How to Install the Product
How to Insert/Remove Micro SD Memory Card
.JDSP4%.FNPSZ$BSE.JDSP4%.FNPSZ$BSE
Inserting direction
Removing direction
Insert the micro SD memory card into the
micro SD memory card slot according to the
arrow direction showed on the SD memory
card slot.
Since it is one-touch type, just press the end
of the micro SD memory card and then the
card will automatically be removed.
If the micro SD memory card is inserted forcibly into the
wrong direction, the card may be damaged and its repair
will be charged for.
Since the memory card is consumable with a limited life, regular inspection or replacement is required.
For the memory card, it is recommended that you purchase and use our retail product. We shall hold
no liability for problems incurred in connection with the use of memory card not recommended by our
company.
To separate the memory card from terminal (product), ensure that the power of terminal is turned o.
Otherwise, it may cause error and/or failure.
It is recommended that you back up the data in a separate storage (PC, etc) besides the memory card
to avoid loss of data.
14 I
www.inavi.com
By adjusting the grooves on the holder-connector,
connect it the black box.
Slide the holder onto the wider groove of the black
box’s holder connector and push it until it rmly ts in.
Remove a lm from the double-sided tape and
attach one side to the holder. Attach the holder
to a location that does not hinder your driving or
outside visibility.
We recommend that you install the black box behind
the rearview mirror. Select a location that allows for
easy button control. Wipe all foreign material and
moisture from the surface to which the double-sided
tape will be attached using a soft and dry cloth.
1
2
How to Install the Product
Checking camera recording direction
1. Using [Black Box Live View] through interworking with iNAVI navigation
2. Checking the recorded video through the PC Viewer
www.inavi.com
I 15
Chapter 01 I General
Chapter 01 I General
How to Install the Product
3
Adjust the body to a proper angle and x it by
tightening the screw of the holder.
The Live View screen allows you to check the
recording angle easily.
4
Remove the camera lens protection le.
If the lm is not removed, the quality of
recorded video will be degraded. Be careful
not to stain the lens with ngerprints.
Connect the power cable (cigar jack cable) and
organize the cable using the cable holders.
5
For the best video quality, keep the front
window of your vehicle clean before starting recording.
Foreign materials (e.g., ngerprints) that
stain on the black box lens may result in
a negative impact on the recorded video.
Keep the lens clean.
If you do not tighten the screw of the holder,
the video may not be recorded properly due
to the rocking of the body or other causes
www.inavi.com
www.inavi.com
Chapter 02 I Basic Information
Basic Operation
Connecting the Power 18
Power ON/OFF 18
Connecting the External GPS Antenna (Optional) 19
Connecting the AV IN (Optional) 20
Connecting the AV OUT (Optional) 21
Recording while Driving 22
Auto parking mode setting (default setting) 23
Manual parking mode setting 23
Auto parking mode setting 24
Recording while parking 25
Recording while parking - Recording le 26
Photo 28
Setting Voice Recording 28
Setting Security LED 29
녹화 재생모드 30
Formatting Micro SD Card 32
Program Upgrade 32
Button Operation 33
Operation Status LED and Voice (BEEP) Operation Mode 33
18 I
www.inavi.com
Press Power ( ) button for more
than 3 seconds to turn the power
ON/OFF. The operation status LEDs
blink in light blue ( ) with a voice
guide.
Connecting the Power
Basic Operation
Install the product and then turn
ON the power of the product or
start up the product. The operation
status LEDs blink in three colors
( / / ) with a beep sound.
: Red
: Green
: Blue
Car power cable
(cigar jack cable)
Please have a safe and
enjoyable drive today!
Power ON :
Please have a safe drive today
Power OFF :
Shut down the system
Power ON/OFF
Long
(3 seconds)
www.inavi.com
I 19
Chapter 02 I Basic
Chapter 02 I Basic
Basic Operation
Do not use the external GPS antenna provided by the third party. Otherwise, the external GPS
terminal may be damaged.
Connecting the External GPS Antenna (Optional)
Make sure that you turn o the
power before connecting the
external GPS terminal for receiving
GPS info.
Connect the external GPS terminal
and turn on the power. The GPS
operates with a voice guide.
Connecting the external GPS
antenna
GPS LED
The GPS has been connected.
20 I
www.inavi.com
Connecting the AV IN (Optional)
To record the rear environment,
connect the rear camera to the AV
IN terminal of the product and turn
on the power. The rear recording is
started with a voice guide.
If you connect or remove the rear camera while the product is operational, this may result in product
breakdown. Make sure that you turn o the power before connecting or removing the rear camera.
Connecting the rear camera
AV/IN LED
The rear camera has been
connected. Rear video recording
is started.
To remove the rear camera turn o the power and remove the camera.
THINKWARE is not liable for any problems caused by connecting or removing the rear camera
while the power is turned on.
Please use the standard AV cable.
If any unsupported AV cable is connected, this may result in damage to the product, for which
THINKWARE does not accept any liability.
Basic Operation
www.inavi.com
I 21
Chapter 02 I Basic
Chapter 02 I Basic
Connecting the AV OUT (Optional)
Connect the AV OUT cable to the
AV OUT terminal to output the
recorded video to an external device.
Displaying recorded video
Please use the standard AV cable.
If any unsupported AV cable is connected, this may result in damage to the product, for which
THINKWARE does not accept any liability.
Item Plug
Rearview Camera
3.5
ø
GND VIDEO -- VCC
AV OUT
2.5
ø
-- GND VIDEO --
GPS
2.5
ø
RX GND TX VCC
Basic Operation
With AV OUT connection, view
real-time video on external device.
22 I
www.inavi.com
Event Recording
When any impact is sensed, the impact is
recognized as an event and event recording
will automatically start.
When the impact of which strength exceeds the
user-specied strength, the black box records scenes for 20 seconds; from 10 seconds
before the event (impact) has occurred to 10 seconds after that and automatically
saves the video in the Event Recording folder.
Voice Recording ON
Voice Recording OFF
Blinking
Recording while Driving
Continuous Recording
Two operation status LEDs are turned on blue
( ) with all videos are recorded in one-minute
units and saved as continuous recording les in
the Continuous recording folder.
Voice Recording ON
Voice Recording OFF
Blinking
(Ring) the buzzer sounds
Start the continuous
recording
Basic Operation
www.inavi.com
I 23
Chapter 02 I Basic
Chapter 02 I Basic
Basic Operation
Auto parking mode setting (default setting)
Manual parking mode setting
When the vehicle power is turned o, the
mode is automatically changed to the
ParkingMode with voice guide.
Press the REC ( ) button (for more
than 3 seconds) to change to the Parking
Mode with a voice guide.
Parking recording starts.
Parking recording starts.
You need the PC Viewer and Live
View configuration. (The default
setting is the Auto Parking Mode)
To change to Auto Parking mode is
available, you should use our retail
continuous power cable. (If the cable is
not our retail continuous power cable, the
product may malfunction.)
It takes about 10 minutes to switch to
the Auto Parking Mode, however, the
mode may not be switched to the Auto
Parking Mode to prevent discharge of the
battery.
Long (more
than 3
seconds)
24 I
www.inavi.com
Auto parking mode setting
PresstheOperationbutton()
(within3seconds)tochangetothe
ContinuousMode.
Parking recording ends.
within 3
seconds
Basic Operation
www.inavi.com
I 25
Chapter 02 I Basic
Chapter 02 I Basic
Recording while parking
When any motion or impact or motion is detected
within the recording scope of the blackbox, the
operation status LED ( ) lights on in Green.
Operation status LED
Event detection recording: Records scenes for 20
seconds, from 10 seconds before the event has
been detected to 10 seconds after and saves in
the Event recording folder.
Event detection recording: Records scenes for 20
seconds, from 10 seconds before the motion has
been detected to 10 seconds after, and saves in
the Motion recording folder.
Voice Recording ON
Voice Recording OFF
Blinkinglight on
Voice Recording ON
Voice Recording OFF
Blinkinglight on
Basic Operation
26 I
www.inavi.com
Basic Operation
Recording while parking - Recording le
The recording folder created in the Micro SD card is
based on date/time in the order of time. In the
created folder, les in the unit of date/time is
created.
The recording le is created based on the
recording start time.
Up to 100 recording les can be created in one
date/time-based folder.
If the le size exceeds the micro SD card capacity,
the oldest le or folder is deleted sequentially
and creates new date/time folder and recording
le.
Year Month
Date
Hour Second
Minute
1-Ch Recording
2-Ch Recording
www.inavi.com
I 27
Chapter 02 I Basic
Chapter 02 I Basic
Manual Recording
In Continuous recording mode, the pressing
of the operation button ( ) for less than 3
seconds even when no accident has occurred will
make the operation status LED light in red ( )
with a buzzer sound.
When the REC button at the side of the black
box is pressed, the black box records scenes for
20 seconds, from 10 seconds before the button
has been pressed to 10 seconds after, and
automatically saves the video to the Manual
Recording folder.
Instead of only recording accident videos, you can record what you want to keep such as beautiful scenery or
places as well as any scenes which must not be deleted.
Manual Recording
Voice Recording ON
Voice Recording OFF
Blinking
Start the manual
recording
Basic Operation
28 I
www.inavi.com
(Click) the buzzer sounds
Photo
Simultaneously press both Set ( ) and Operation
( ) buttons to take a photo with a voice guide.
The photo is saved in the Photo folder.
Photo
Start the voice
recording.
Setting Voice Recording
Voice Recording ON/OFF
Press the Set ( ) button for less than 3 seconds to turn ON/OFF voice recording.
Voice Recording ON
Voice Recording OFF
BlinkingLight on
The product shall not be used for purposes other than its intended purpose, nor shall be arbitrarily changed.
Under Privacy Act and relevant laws, the user shall hold the sole responsibility for recording other person’s
voice using this recording function.
Basic Operation
www.inavi.com
I 29
Chapter 02 I Basic
Chapter 02 I Basic
Setting Security LED
Setting Security LED
Simultaneously press both of Set ( ) button and Operation ( )
button for longer than three seconds to turn ON/OFF Security LED.
Security LED ON Security LED OFF
Mode1 setting : scroll left and right
Mode2 setting: blink
Mode3 setting
Event detection
recording
Motion detection
recording
Mode3 setting is available only through
PC Viewer
Basic Operation
30 I
www.inavi.com
Playing Mode - 1
Button Function
Settings
Select a file
Operation Play the selected video
(
)set+( ) operation
(press for at least three seconds)
Configuration mode conversion
List of the recording le
Display the recorded le with Event [E], Parking [P], Front/Rear [Front/Rear], Date/Time.
Connect the external devices to the black box using AV-OUT cable.
It is recommended to use the standard AV-OUT cable guaranteed by our company.
How to Execute
1
Press the blackbox power ( ) button for a while to turn o the
system power and then press the power ( ) button to turn on
the product.
2
Simultaneously, press set( ) button and operation( ) button until
you hear the voice guidance “ restart the system” for about ve seconds.
3
The playing mode screen appears on the screen of the connected external device.
Basic Operation
(Restart the system) If you press the set button and operation button after the
voice guide, the playing mode will not start
www.inavi.com
I 31
Chapter 02 I Basic
Chapter 02 I Basic
Playing Mode - 2
Conguration mode
Simultaneously press the set ( ) button and operation ( ) button for longer than three
seconds to go to the conguration menu screen.
Button Function
Settings
Select Yes/No on the save menu screen
Operation [Yes] save the configuration menu / [No] do not save the configuration menu
When you press the set ( ) button for longer than three seconds, the menu where you can save
the changed conguration will appear
Separate the power or press Reset button to end the playing mode
When the video is being played, you cannot run the conguration mode
Button Function
Settings
(Press for less than three seconds) stop the video and go to the list of the
recording file
(Press for longer than three seconds) quick-play backward
Operation
(Press for less than three seconds) Pause
(Press for longer than three seconds) quick-play forward
Playing video
Play the recorded video.
Button Function
Settings
Select the configuration menu
Operation Change the selected configuration menu
Basic Operation
32 I
www.inavi.com
Basic Operation
Formatting Micro SD Card
Firmware upgrade completed
Program Upgrade
When an upgrade le exists in the micro SD card,
an upgrade can be carried out.
After completing the upgrade, the program is
automatically restarted.
BlinkingBlinking
How to Execute
1
Press the blackbox power ( ) for a while to turn o the system power, and then press the
power ( ) button to turn on the product power..
2
( ) (restart the system) Press the Set ( ) button for ve
seconds until you hear the voice guide
3
The green light ( ) blinks and the Micro SD card formatting
is started.
(restart the system.) If you press the Set button after the voice guide is ended, the
micro SD card formatting is not started.
Formatting the micro SD
memory card.
BlinkingBlinking
www.inavi.com
I 33
Chapter 02 I Basic
Chapter 02 I Basic
Operation Status LED and Voice (BEEP) Operation Mode
Button Pressed for less than 3 seconds Pressed for more than 3 seconds
Set Button
Voice Recording ON/OFF
■ Buzzer Sound ON/OFF
■Formats the micro SD memory card
(Providing power while pressing the button)
Operation Button
Parking mode ending/Manual Recording
Changing to Parking mode
Set Button +
Operation Button
Photo Security LED ON/OFF
Button Operation
Basic Operation
Operation Mode LED (Left/ )
LED (Right/ )
Voice Recording (On) Voice Recording (Off )
Power ON/OFF
BOOTING
Voice Guide:
Please have a safe driving today!
Continuous Recording:
Blue light on Blue light on Blue light on
Voice Guide:
Start the continuous recording
Event Recording
Continuous Recording: Parking Recording
Blue light on Green light on Red Light On Red blinking
Voice Guide:
(Ring) the buzzer sounds
L
R
Light-blue light one
Three colors blinking
34 I
www.inavi.com
Operation Mode LED (Left/ )
LED (Right/ )
Voice Recording (On) Voice Recording (Off )
Manual Recording
Red Light On Red Light On Red blinking
Voice Guide
Setting
▶ Manual recording starts.
Releasing
▶ Manual recording ends.
Parking Recording
(Waiting)
Greenlighton
Blue light on Blue blinking
Voice Guide
Setting
▶ Parking recording starts.
Releasing
▶ Parking recording ends.
Parking Recording
(during recording)
Event detection recording
Green light on Red Light On Red blinking
Motion detection recording
Green light on Green light on Green blinking
L
R
Operation Status LED and Voice (BEEP) Operation Mode
Basic Operation
www.inavi.com
I 35
Chapter 02 I Basic
Chapter 02 I Basic
Operation Status LED and Voice (BEEP) Operation Mode
When the space for Continuous Recording is insucient, the oldest video les are automatically
deleted with new les then being saved. However, in this case, any video les saved in the Event
folder will not be deleted.
While there are only the video les in Event folder and the space is insucient, the oldest Event
video les will be automatically deleted. Therefore, please save important video les to the hard
disk of a PC, or any other storage-devices for safe backup.
Basic Operation
Operation Mode LED (Left/ ) LED (Right/ )
SD card format
Green blinking Green blinking
Voice Guide
Formatting the micro SD memory card.
Firmware Upgrade:
Red blinking Red blinking
Voice Guide
Starting
▶
New version of firmware has been detected. The upgrade is under progress.
Normal termination ▶ Firmware upgrade has been completed.
Abnormal termination
▶
Firmware upgrade has not been completed.
Abnormal operation
(malfunction,
bad recording)
Red/Blue blinking Red/Blue blinking
Voice Guide
Supports voice guide according to the situation.
ex: Insufficient space in Event recording folder.
(video recording is unavailable sue to lack of memory space)
L R
36 I
www.inavi.com
www.inavi.com
www.inavi.com
Chapter 03 I Recorded Video Menu Info
PC Viewer
Installing a Program 39
Screen Conguration 40
Screen Conguration 41
Executing a PC Viewer 42
View the Recording Folder 44
View Full Screen 45
View Map 46
Front view / Map 47
Front view / Rear view 48
Self-diagnosis 49
Black Box Setting > Video 50
Black Box Setting > Parking Mode 53
Black Box Setting > Additional Functions 56
Black Box Setting > Acceleration Gauge 65
Black Box Setting > Accident Report 66
Screen Capture 67
Version Info and Firmware Download. 68
PC Viewer
www.inavi.com
I 39
Chapter 03 I Menu
Chapter 03 I Menu
PC Viewer
You can view the video le recorded by the black box through the PC Viewer.
To play the saved video le on the PC, you must download the program from the THINKWARE home page.
Installing a Program
2
1
3
4
Recommended Specications for PC Viewer
Operating System (OS) Windows XP(32bit), Windows
Vista(32bit), Window7(32/64bit)
Pentium 4 / 2.8Ghz or higher / RAM 1G or higher
Disk Space: HDD 4GB / Directx 9.0 or later
Microsoft Internet Explorer 7.0 or later
Go to www.inavi.com > Upgrade > Black Box
Upgrade and then download the setup le.
Double-click
the downloaded le on the Windows
Explorer.
First, the dshow codec is installed and then the
integrated PC Viewer program is installed.
- After completing installation, click the Complete
button to exit the installation window.
Check whether the
iNaviPlayer
shortcut has been
installed on the Desktop or not.
40 I
www.inavi.com
Screen Conguration
Rear Video
View Map
Immediately shows the
recording location and
point (only when the
Internet is connected)
Zoom in Map
Motion Recording
Front view /
Real view
Self-diagnosis
Acceleration
Gauge
Screen
Capture
Access the iNAVI Web site.
Hide/Full Screen/End
Adjust Playback VolumeAdjust Screen Brightness
Current Playtime/
Total Playtime
Configuration Accident Report
Update the firmware and view the version info
File
Information
Playback
Screen
Adjust Playback
Speed
Playback Progress Status Bar Continuous Recording:
PC Viewer
Play List
Event Recording
Manual Recording
www.inavi.com
I 41
Chapter 03 I Menu
Chapter 03 I Menu
Play the Previous File Plays the file previous
to the one which is playing.
Resume the file play Plays the recorded file /
resumes the file play
Stop Stop play
Play Next File Plays the file next to the one
which is playing.
Move to Previous Goes backward by one
second while playing a file
Move to Next
Goes forward by one second
while playing a file
Quick Play
Quickly plays the file
Open a Drive Opens the removable storage
device where the recording files are saved
Save the recording file Saves the recording
file being played to the PC
(by controlling the scroll bar)
Adjust Playback Speed Adjusts the playback
speed by controlling the scroll bar left or right
(by controlling the scroll bar)
Brightness Adjusts the brightness by
controlling the scroll bar left or right
(by controlling the scroll bar)
Volume Adjusts the volume by controlling
the scroll bar left or right
PC Viewer
Screen Conguration
42 I
www.inavi.com
Executing a PC Viewer
Insert the micro SD memory card into the micro SD
card reader by placing it in with the top of the card
upwards and connect to the PC.
Execute the iNaviPlayer icon on the Desktop to
execute the PC Viewer program.
The PC Viewer program screen appears.
1
2
Front
Front Rear
Micro SD Memory Card
Double-
click
Removing Micro SD Card
Press the red button
of the micro SD card
reader in the
direction as shown in the gure.
The micro SD memory card is then removed.
If a micro SD card has been inserted in the product but never
used, the drive cannot be opened. In this case, insert the micro
SD card in the product and record at least one le.
PC Viewer
The micro SD memory card reader is an additional product. You can buy it through the
iNAVI homepage.
Please make sure that you insert the micro SD card
reader to the reader in the correct direction.
www.inavi.com
I 43
Chapter 03 I Menu
Chapter 03 I Menu
Double-
click
or
3
4
Executing a PC Viewer
Open a Drive( )
Select the removable storage device of the micro SD
card connected to the PC and select “OK”.
Setup le in Micro SD memory card
Click Open ( ) :
When the model (number) appears
on the screen after reading Setup le, select the setting
(conguration) correspond to that model (number)
Click Setting icon : The setting (conguration)
screen correspond to the model (number) appears
No Setup le in Micro SD memory card
Click Open ( ) / Setting icon : When the window
in which you can input the model (number) on the
screen and the model number appears on PC Viewer,
select the setting (conguration) correspond to that
model (number)
The recording folders and les saved in the selected
drive are listed up in the File List.
In the File List, select a desired le, and then
double-click it on the list or click the Play icon to
play the le.
Setup le in Micro SD memory card
PC Viewer
44 I
www.inavi.com
View the Recording Folder
Continuous Recording List Screen Event Recording List Screen
You can view the list of recording les
by selecting each recording folder
(Continuous Recording, Event
Recording and Manual Recording,
Motion Recording).
PC Viewer
www.inavi.com
I 45
Chapter 03 I Menu
Chapter 03 I Menu
View Full Screen
If the resolution of the monitor is higher than the resolution of the original video (1280x720)
the displayed resolution is same with the resolution of the original video.
If the resolution of the monitor is lower than the resolution of the original video (1280x720) :
the displayed resolution is adjusted to the resolution of the monitor.
Click the “Full Screen” ( ) icon on
the top of the PC Viewer to enlarge
the play screen to the full screen of the
monitor.
On the full screen, click the “Zoom
out” icon on the top of the PC Viewer
to change the screen to the standard
screen display ratio.
PC Viewer
46 I
www.inavi.com
View Map
Click ( ) Zoom-in Map icon on the
upper right hand corner of PC Viewer to
enlarge the map to the full screen.
On the full screen, click ( ) Zoom-out
Map to switch over the screen to the
front view.
PC Viewer
www.inavi.com
I 47
Chapter 03 I Menu
Chapter 03 I Menu
Front view / Map
Click Rear view / View Map tap to switch
over the screen while playing the video.
Rear view tap screen
View Map tap screen
PC Viewer
48 I
www.inavi.com
The screen of View Map cannot be enlarged to the full screen (of the monitor)
Front view / Rear view
Click ( ) Front view / Rear view icon
to change the screen while playing the
video or displaying Map or Video.
(Front view
Rear view)
PC Viewer
www.inavi.com
I 49
Chapter 03 I Menu
Chapter 03 I Menu
For A/S he self-diagnosis of the black
box is carried out.
Menu includes Examination Date/Product
Name/Quality Setting/Brightness/Contrast/
Sharpness/Voice Recording/
Voice Comment//Voice Comment Volume/
Camera Location/Acceleration Sensor
Sensitivity/Memory Partition/Event File
Overwriting/Recorded Video Overwriting/
Recorded Motion File Overwriting/Security
LED Menu.
Self-diagnosis
PC Viewer
50 I
www.inavi.com
Congure the black box environment.
1
Quality
You can set the screen quality of black
box to three levels:
VGA(640X480)
HD(1280X720) (default)
FHD(1920X1080) (unavailable)
Black Box Setting > Video - 1
It is changed to 15 fps for the
Parking Mode temporarily.
Support up to HD-level
resolution
2
Frame
You can set the recording frame of the
black box to three levels:
Variable: Min. 15 fps ~ Max. 30 fps
Fixed frame (15f): 15 fps
Fixed frame (30f): 30 fps
(default value)
1
2
PC Viewer
www.inavi.com
I 51
Chapter 03 I Menu
Chapter 03 I Menu
Black Box Setting > Video - 2
The value varies according to the
memory partition setting set in
Conguration.
3
Video Quality
Displays the time and number of the
recording les by Continuous/Event/
Manual/Parking recording to the Quality
setting.
- : Continuous Area
- : Event Area
- : Manual Area
- : Motion Area
4
Adjustment
Adjust the screen setting values for
recording
- Brightness: Adjust the brightness
level of the screen (-3 ~ +3)
- Contrast: Adjust the contrast of the
screen (-3 ~ +3)
- Sharpness: Adjust the sharpness of
the screen (-3 ~ +3)
3
4
PC Viewer
52 I
www.inavi.com
Black Box Setting > Audio
1
Voice Recording
Turns on or o the voice recording of the
black box.
Use (default setting)
Not Use:
2
Voice comment
Turn on/o the voice comment of the
black box
Use (default setting)
Not Use:
1
2
PC Viewer
www.inavi.com
I 53
Chapter 03 I Menu
Chapter 03 I Menu
Black Box Setting > Parking Mode - 1
PC Viewer
1
Recording quality
Sets the recording quality of a video for
the Parking recording.
-
Recording time and the number of
events saved diers according to the
memory partition setting.
2
How to Detect Events
Sets the method of Event/Motion
detection recording to be saved in the
Event folder during the parking record-
ing.
3
Sensitivity Setting for Parking Mode
Adjusts the sensitivity of event/motion.
(Low ( ) ↔( ) High)
Event Sensitivity: Up to 10 levels of
event sensitivity can be set.
Motion sensitivity: Up to 3 levels of
motion sensitivity can be set.
1
2
3
Tip for sensitivity setting
For the high-class sedan of which vibration level
is low, set the level high. For trucks and RVs of
which vibration level is high, set the level low.
54 I
www.inavi.com
4
Timer Setting for Parking Recording
When the parking recording is made
using the continuous power of the
vehicle, the parking recording is ended
after the specied time is expired in
order to prevent battery discharge.
- Range: 1 hour ~ 48 hours (8 levels)
5
Battery Voltage Setting
Vehicle voltage 12V
- Range of voltage for ending the
recording:
11.7V~12.4V (changed by 0.1V unit)
- Range of voltage for parking mode:
12.4V ~ 13.1V (changed by 0.1V unit)
Vehicle voltage 24V
- Range of voltage for ending the
recording:
23.4V ~ 24.8V (changed by 0.2V unit)
- Range of voltage for parking mode:
24.8V ~ 26.2V (changed by 0.2V unit)
Black Box Setting > Parking Mode - 2
PC Viewer
4
5
www.inavi.com
I 55
Chapter 03 I Menu
Chapter 03 I Menu
Notes for Setting Parking Mode (based on 12V of
vehicle battery)
When it takes too much time to change the mode to
Auto Parking mode while driving, or while parking, raise
the voltage for changing to Parking mode.
Setting the range of voltage and time for ending
the recording (based on 12V of vehicle battery)
When recording time becomes too short after changing
the mode to Auto Parking mode, lower the voltage for
ending the recording.
(However, if the range of voltage for ending the recording
is set to the too low value, the vehicle battery may be
discharged so be careful.)
When the voltage is lowered than the setting value of
voltage for ending the recording while setting the
recording ending time, the function to set the voltage for
ending the recording is started rst.
Functions of auto parking mode and
blocking voltage for ending recording end
are available when our retail continuous
power cable is used.
If the product malfunctions even when you
changed the setting values, please check
the terminal and the vehicle battery and if
required, charge the battery.
Set the auto parking mode switch level
and the ending recording level according
to the battery status and usage time
before using it.
To adjust the setting values to appropriate
values, change the values by one level for
avoiding malfunctions.
The product may be malfunctioned
when you use other cables but our retail
continuous power cable.
Range of voltage for parking mode:
Min 12.4V ~ Max 13.1V
Changing the mode
to Parking mode
while driving
When it takes too much time
to change the mode to Auto
Parking mode while driving
Range of voltage for ending recording
Min 11.7V ~ Max 12.4V
Too long parking recording
time (the vehicle battery may
be discharged)
Too short parking
recording time (the vehicle
battery discharge will be
prevented)
Black Box Setting > Parking Mode - 3
PC Viewer
56 I
www.inavi.com
Black Box Setting > Additional Functions - 1
1
System Time
You can set the date and time of the
product.
- To modify the time and save it, rst
unlock the settings by clicking the
checkbox on the right side.
- The time set in the PC is displayed. You
can modify the time by clicking each
number.
- After modifying the date and time,
click the “Set Device Time” button to
save the changes.
- After inserting the saved micro SD
card to the product, turn the power
on; the changed date and time is
applied for the product.
1
Directly modify the date and time by placing the mouser cursor on the “Date/Time”
To save the modied date and time, rst unlock the
settings by clicking the lock icon.
Modify the date and time by clicking the Up and Down arrows.
PC Viewer
The date and time is saved as
“date_Time.cfg” in the “setting”
folder of the micro SD folder.
www.inavi.com
I 57
Chapter 03 I Menu
Chapter 03 I Menu
2
3
Black Box Setting > Additional Functions - 2
PC Viewer
2
Camera location (position)
(reversal display)
Install the black box on the glass or on
the dashboard to prevent the display
being upside down (reversed).
3
Acceleration Sensor Sensitivity
Adjust the sensitivity of the acceleration
sensor of the black box on a scale of 0 to
10.
(Insensitive ( ) ( ) Sensitive)
58 I
www.inavi.com
4
Black Box Setting > Additional Functions - 3
4
Memory partition
In Conguration, you can set the capacity
ratio of Continuous/Event/Manual/
Motion recording by each memory
(A/B/C).
A Type (Recommended):
Continuous Recording-centered
B Type Event/Manual Recording-
centered (using double capacity of
A type)
C Type Event/Manual Recording-
centered (using four times of
capacity of A type)
The Continuous recording les will occupy the entire capacity of the memory excluding the
minimum recording memory size when there is no Event/Motion/Manual recording le.
The size of a recording le may be dierent by 30 ~ 40MB from the others.
When the memory partition setting is changed, a “Format the Memory” window appears.
The changes will be applied after formatting the memory.
PC Viewer
www.inavi.com
I 59
Chapter 03 I Menu
Chapter 03 I Menu
Black Box Setting > Additional Functions - 4
Setting Value 8GB 16GB
A Type
[Continuous Recording-
centered]
■ Event Recording:
400MB (about 9 minutes)
■ Motion Recording:
800MB (about 18 minutes)
■ Manual Recording:
250MB (about 6 minutes)
■ Event Recording:
800MB (about 18 minutes)
■ Motion Recording:
1,600MB (about 36 minutes)
■ Manual Recording:
250MB (about 6 minutes)
B Type
[Event/Manual Recording
centered]
(using double-capacity of
A Type)
■ Event Recording:
800MB (about 18 minutes)
■ Motion Recording:
1,600MB (about 36 minutes)
■ Manual Recording:
250MB (about 6 minutes)
■ Event Recording:
1,600MB (about 36 minutes)
■ Motion Recording:
3,200MB (about 72 minutes)
■ Manual Recording:
250MB (about 6 minutes)
C Type
[Event/Manual Recording
centered]
(using four-times of capacity
of A Type)
■ Event Recording:
1,600MB (about 36 minutes)
■ Motion Recording:
3,200MB (about 72 minutes)
■ Manual Recording:
250MB (about 6 minutes)
■ Event Recording:
3,200MB (about 72 minutes)
■ Motion Recording:
6,400MB (about 144 minutes)
■ Manual Recording:
250MB (about 6 minutes)
PC Viewer
32GB 적용은 어떻게 해야되나요?
60 I
www.inavi.com
Black Box Setting > Additional Functions - 5
5 Setting Overwrite by Recording
Video
Determines whether or not to delete
the oldest le when the Event/Manual
/Motion recording memories of the
black box are full.
5
PC Viewer
www.inavi.com
I 61
Chapter 03 I Menu
Chapter 03 I Menu
Black Box Setting > Additional Functions - 6
6
Memory Format
Format the micro SD card where the
recording les are saved.
6
Click the Memory Format button and a
memory format window appears.
Select each format option in the format
window and click “Start” button to
execute format.
We recommend you to back up the
data before formatting the memory.
If you format the memory, the saved data
is deleted and any deleted data cannot be
then restored.
The format conguration window may vary
according to the OS installed in the user’s PC.
PC Viewer
62 I
www.inavi.com
Black Box Setting > Additional Functions - 7
8
Setting Security LED
You can set movement of the security
LED to three types:
Mode 1 (Left/Right scroll):
The LED moves left and right.
(default setting)
Mode 2 (Blinking): All LEDs blink at
the interval of 0.5 second.
Mode 3 (Auto): The Security LED
operates dierently according to
the recording mode in use
(Continuous/Event/Manual/
Motion).
- Continuous Recording:
Left/Right fade
- Event Recording:
Center face (Fade Out)
- Parking (motion) waiting:
Left-right Fade
- Parking (motion) recording:
Center Fade (Fade In)
- Manual Recording:
Center Fade (Fade Out)
Disabled:
The Security LED is turned o.
8
Security LED
PC Viewer
부가기능 스크롤 내려서 찍은 이미지 요청이요~
www.inavi.com
I 63
Chapter 03 I Menu
Chapter 03 I Menu
Black Box Setting > Additional Functions - 8
9
Apply the settings
If you forcibly delete the setup.cfg
le, you cannot use it on the PC
Viewer. In this case, insert the micro
SD card to the product and operate
the product. Then the setup.cfg le
is created as a default setting and it
can be used on the PC Viewer again.
After completing the settings, click the
“Save” button to save the settings to the
micro SD card.
The saved conguration le is created as
“setup.cfg” le in the “setting” folder of
the micro SD card.
Insert the micro SD card to the product
and turn on the power. The product
boots up with the settings being
simultaneously applied to the product.
9
PC Viewer
64 I
www.inavi.com
Black Box Setting > Additional Functions - 9
10
Resetting the Conguration
To apply the initial setting values, not
the user-specied values, click the “Reset
Values” button on the right bottom side of
the screen.
The setting values are saved in the micro
SD card. Therefore, insert the micro SD
card to the product and turn on the
power. The product boots and the
settings are simultaneously applied to
the product.
9
PC Viewer
www.inavi.com
I 65
Chapter 03 I Menu
Chapter 03 I Menu
Display left/right, rotation/vibration/
impact and other information using the
acceleration of gravity on 3 axes (X, Y, Z)
based on the data acquired by the sensor,
which recognizes the acceleration of
gravity applied on the car
- Indicate the name of le you are currently
playing
- Display the le size and the time of
recording
- Display the value on 3 axes (X, Y, Z) of
speed and acceleration sensor
Black Box Setting > Acceleration Gauge
PC Viewer
66 I
www.inavi.com
When you click Accident Report while
playing the video, the video immediately stops and the time, GPS data and
speed (appeared on the screen) are
displayed (Printable)
Save: t
he data is saved as [inaviBlack_
Accident Report.jpb] on the desktop.
Black Box Setting > Accident Report
The le name is limited to 500
words. Otherwise, the le name
cannot be assigned to the saved
.jpg le.
PC Viewer
www.inavi.com
I 67
Chapter 03 I Menu
Chapter 03 I Menu
Screen Capture
Capture the images of the recorded
video being playing now.
Click the “Capture” icon on the top of
the PC Viewer to capture the screen cur-
rently being played.
When the video screen is captured, an
explorer appears to search the folder
where the captured image will be
saved as JPEG image le, allowing for
entering the le name.
On the explorer, type the le name
and folder name and click the “Save”
button to complete screen capture.
The captured screen is saved as a
JPEG image le.
PC Viewer
68 I
www.inavi.com
Version Info and Firmware Download.
Click the Firmware button on the top of
the PC Viewer and an “Update
Firmware” window appears.
Viewer Version
On the Version Info on the Update
Firmware window, you can view the
version information on the PC Viewer
and rmware being used.
Firmware Update
①
Click the “Go to Update Page” button
to move to the upgrade page (login is
required).
②
Select the latest rmware on the page
and click the “Firmware Download”
button.
③
Move the ve les downloaded in the PC
to the top folder of the micro SD card of
the blackbox.
④
Insert the micro SD card where the
rmware is saved into the product
and turn on the power. Then upgrade
automatically starts.
PC Viewer
Product Specications 70
Product Warranty 72
Chapter 04 I Others
70 I
www.inavi.com
Item Specication Remark
Model iNAVI BLACK G100
Dimensions/Weight 45 x 103 x 36mm / 62.6g
Capacity Micro SD Memory Card
Recording Type
Continuous Recording Recording in the unit of one minute
Event Recording
10 seconds before and after an event occurs
(total 20 seconds)
Manual Recording
Parking Recording (Parking Mode)
Additional device or installation is
required for providing continuous power
Photo
Voice Recording (the initial mode is ON)
Set button (within 3 seconds) /
available to set voice recording ON/OFF
General Recording
Quality
Total 3 Levels
Recording time diers according to the
partition setting
Camera 2.0M Pixels, 1/3.2" CMOS
Angle of View About 140°(based on the opposite angle)
Video HD(1280X720/H.264/Extension AVI)
Rear when 2-Channel operation:
VG A(640X480/H.264/Extension AVI)
Frames
1-Ch: Front operation (30 fps in max.)
2-Ch: Front/Rear operation
(25 fps for front/10 fps for rear in max.)
Audio PCM (Pulse code modulation)
Acceleration Sensor 3-axis acceleration sensor (3D, ±4G) 10 levels of sensitivities
Product Specifications
For the purpose of the improvement of the performance of quality
of the product, the parts may be changed without any prior notice.
www.inavi.com
I 71
Chapter 04 I Other
Chapter 04 I Other
Item Specication Remark
Rear Camera Supporting AV-IN port (3.5Ø)
The iNAVI Black G100 compatible rear camera
should be additionally purchased.
GPS Supporting external GPS port (2.5Ø)
The iNAVI Black G100 compatible external GPS
should be additionally purchased.
Input Power
DC 12/24V
DC 12V is superior when both of two are supplied
Current consumption About 1.5W or less
Auxiliary power source super-capacity
Security LED Panorama White LED
Alarm LED 3-color LED Two rear LEDs
HW Status Display LED
LED displaying status of connection to
AV-IN and GPS
Two side LEDs
Alarm Built-in speaker Voice (BEEP) guide
External Output NTSC
Operation Temperature/Storage
Temperature
0~45℃/ -10~60℃
Interface One AV-OUT port (2.5Ø)
Product Specifications
72 I
www.inavi.com
For the accessories and expendables except for the black box, separate warranty period shall be applied.
The warranty period of this THINKWARE product is limited to one year.
Consumer Damage Compensation Rule
Product Name
Purchased on Day, Month, Year
Customer name: Tel:
Address:
Customer
Information
Agency
■ The product quality assurance shall be in accordance with the product warranty.
■ The purchaser shall keep the purchase date for future evidence of purchase and future reference, since the warranty period is calculated based
on the purchase date.
■ For details on the warranty, see “Consumer Damage Compensation Rule”.
■ All replaced products shall be new products or products having similar functions.
■ THINKWARE is not liable for the repair, replacement, or refund of any product until the customer returns the defected product to THINKWARE.
■ This warranty shall not be re-issued. Please keep this warranty. (The serial number is not re-issued.)
■ The product that THINKWARE has not authorized cannot be supported with any kind of THINKWARE services (beware of imitations.)
In the case of
malfunction
originated in
normal
operating
conditions by
product’s
performance or
functions within
the term of
components
possession
Consumer Damage Type
Under Warranty After Warranty
A/S A/S
In the case of essential repair being required within 10
days after the purchase
The product is exchanged with new
one or the price is refunded.
N/A
In the case of essential repair being required within 1
month after the purchase
The product is exchanged with
new one.
In the case of essential repair of the exchanged product being required within 1 month after the exchange
The product is exchanged with new
one or the price is refunded.
When exchange is unavailable The price is refunded
When repair is
available
When any defect occurs Free repair
Charged repair or
charged product
change
In the case of malfunction
originated up to 3 times by
same defect
The product is exchanged with new
one or the price is refunded
In the case of malfunction
originated more than 4 times
by same defect
Loading...