Thinklogical OriginKVM 8250 Quick Start Guide
The OriginKVM 8250
OriginKVM 8250
High Performance KVM Switch
STEP 1
Check contents
When you receive your Thinklogical™ OriginKVM 8250, you should find the
following items:
OriginKVM 8250 Switch – KVM-008250
AC Power Cord – PWR-000006-R (International connections may differ)
OriginKVM 8250 Cable Kit – KIT-000063-R
OriginKVM 8250 Product Manual
USB HID “A” Connector
(from the USB Device)
USB HID “B” Connector
(to the Host System)
PS/2 1
PS/2 2
HDMI 1
1
1
HDMI 2 HDMI 3 HDMI 4 HDMI 5 HDMI 6 HDMI 7 HDMI 8
2
QUICK START
GUIDE
PS/2 to PS/2 Male, 6 ft. (CBL-000006-006FR) – Qty 4
USB A-B, 6 ft. (CBL-000015-006FR) – Qty 8
HDMI to DVI, 6 ft. (CBL-000030-002MR) – Qty 10
3.5mm Male/Male Audio, 6 ft. (CBL-000016-006FR) – Qty 8
3 4
5 6
USER 1
Display 1
CONTROL
OUT
IN
Thinklogical’s™ OriginKVM 8250 is a high performance KVM switch that enables true, simultaneous multi-user access from two user
stations. The design allows users to access and switch between eight multi-platform servers. The OriginKVM 8250 improves operational
productivity from the simplest to the most complex requirements and for a variety of applications such as hardware/software development
and testing labs, network server management, and multi-workstation operation.
All physical connections to the product use industry-standard connectors. All connections are found on the rear of the unit.
USER 1: Three USB 1.0 and one USB 2.0 ports.
USB 2.0
2
DVI
7 8
DISPLAY 1
DISPLAY 2
USB 2.0
1 2
1
USER 2: Three USB 1.0 and one USB 2.0 ports.
NOTE: On some OriginKVM 8250 models, the
5
STEP 5
Connect all required HID devices as shown.
The OriginKVM 8250 can support a full set of
HID devices for two user stations.
CAUTION!
HOST 1CONTROL
1
HOST 2
2
100- 240 V ~, 0.5 A, 50 / 60 Hz T 2A , 250VAC
Replace with same type and rating fuse.
USE ONLY WITH 250V FUSE
rectangular USB 2.0 designation symbols may
indicate the wrong ports. The USB 2.0 port is always
the lower right of the four user ports, located below
the midline between the two rows of USB ports, as
shown below and above.
6
7
STEP 7
Turn the computers ON
and ensure that all system
functions are operating
properly
2
3
1
DVI-D Connector 1
DVI-D Connector 2
PS/2 Option
USB Option
PS/2 Option (Ports 1 and 2 only)
1. CPU to DVI Port 1 or 2 using CBL-000030-002MR.
2. CPU to PS/2 Keyboard and Mouse Port 1 or 2 using (2)
CBL-000006-006FR.
3. CPU to Audio IN Port 1 or 2 using CBL-00016-006FR.
USB Option (Ports 1 through 8)
1. CPU to any DVI Port 1-8 using CBL-000030-002MR.
2. CPU to USB Keyboard and Mouse Port 1-8 using (1)
CBL-000015-006FR.
3. CPU to Audio IN Port 1-8 using CBL-00016-006FR.
1
2
RJ45 Connector
USER 2
DVI
Display 2
STEP 2
Connect your CPU
to the desired DVI
Port using DVI
2
3
3
4
cable CBL-000030002MR.
STEP 3
If using the PS/2 option, connect
your CPU to the keyboard and
mouse at Ports 1 or 2 only using the
2 cables (CBL-000006-006FR)
provided.
If using the USB option, connect your CPU to the
keyboard and mouse at any desired Port 1
through 8 using one USB cable (CBL-000015006FR) provided.
STEP 4
Connect your CPU to Audio IN using cable CBL-000016-006FR.
Be sure each set of DVI, Keyboard/Mouse and Audio inputs are
connected to the same numbered ports.
(Optional) OriginKVM 8250 Unit 2
1
DISPLAY 1
2
3 4
Each OriginKVM 8250 system includes the following features:
Multi-user, simultaneous (2) user stations with access to 8 PCs.
CPU Ports 1 and 2 have the option of supporting USB Keyboard and Mouse or PS/2 Keyboard and Mouse.
Supports all single-link DVI video signals.
Easily configure, select and manage your system and servers via Thinklogical’s™ unique communication actuation
technology and BIOS level access.
DDC pass through for HDMI support.
USB pass through for support of USB 2.0 devices of any kind. Additional devices can be attached by connecting a hub
to the USB user port.
User collaboration for 2 users to work on the same CPU at the same time (HDMI and USB pass through for one user
only while collaborating).
Scalable for multiple applications such as dual display, triple display, or quad display.
Units are stand alone or rack mountable (brackets included).
STEP 8 (Optional)
More than one OriginKVM 8250 unit can be cascaded together to handle multiple
single-link videos. Using a standard CAT5 cable with RJ45 connectors (not
provided), connect to the CONTROL OUT receptacle on OriginKVM Unit 1 and the
8
RJ45 Connector
CONTROL
5 6
other end to the CONTROL IN receptacle on OriginKVM Unit 2. Up to 8 units can be
cascaded by repeating this process for each unit added.
OUT
7 8
USB 2.0
1 2
HOST 2
HOST 1CONTROL
STEP 6
Ensure that the Power Switch is in the OFF (0)
position. Connect the supplied AC Power Cord
(PWR-000006-R) to the OriginKVM 8250 power
receptacle and turn the unit ON (1).
Ensure that all system functions are operating
properly.
Replace with same type and rating fuse.
CAUTION!
FUSE
USE ONLY WITH 250V
PS/2 1
PS/2 2
HDMI 1
HDMI 2 HDMI 3 HDMI 4 HDMI 5 HDMI 6 HDMI 7 HDMI 8
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: support@thinklogical.com
IN
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
DISPLAY 1
DISPLAY 2
1
2
100- 240 V ~, 0 .5A , 50 / 60 Hz T 2A , 250 VAC
OriginKVM_8250_Quick_Start_Rev_B
Visit us online at www.thinklogical.com for more product information, current updates
and the complete line of Thinklogical products.
TM
Loading...