Thinklogical DVI Splitter Quick Start Guide
VDA Series DVI Splitter
Single-Link 1:2
QUICK START GUIDE
DVI IN
DVI OUT 1
DDC
DVI OUT 2
POWER
5VDC
The Logical Solution
The VDA-1 1:2 Splitter from Thinklogical™ sends a
video source to two displays without signal loss.
Installation is plug-and-play with no adjustments
+
required. Each model is also compatible with most
Thinklogical™ DVI Extenders.
The Models
Source
CPU
DVI OUT
The Future of Access and Control
DVI Splitter
SL Distribution Amp 1:2
VDA-1 (SL 1:2) distributes single-link DVI to 2
single-link displays.
VDA-2 (SL 1:4) distributes single-link DVI to four
single-link displays.
VDA-3 (DL 1:2) distributes dual-link DVI to two
dual-link displays.
STEP 2: Connect the 5VDC Power
Supply (PWR-000022-R) to the INPUT
POWER JACK located on the front
2
panel of the VDA Splitter’s chassis
and plug it into a standard AC source.
5VDC
Power
When you receive your
Single-Link 1:2 VDA Series
DVI Splitter you should
find the following items:
· Single-Link M-M, 2 meter
DVI Cable (2)
· AC/DC Adapter
· Quick Start Guide
3
STEP 3: Connect one end
of the Single-Link DVI-D
male to male cable to the
video source (DVI-D video
card) and the other end to
the DVI IN connector on
the VDA Splitter. Ensure
all video output displays
are functioning properly.
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: support@thinklogical.com
DVI OUT 1
DDC
Supply
1
DVI OUT 2
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
Visit us online at www.thinklogical.com for more product information, current
updates and the complete line of Thinklogical™ products.
STEP 1: Connect one end of a Single-Link DVI-D
male to male cable from your Primary Output
Monitor to the DVI OUT 1 DDC connector on the
VDA Splitter’s front panel. Connect one end of a
Single-Link DVI-D male to male cable from your
Secondary Output Monitor to the DVI OUT 2
connector.
VDA_Splitter_SL_1x2_Quick_Start_Rev_A
Loading...