The Singing Machine SMK470 Instruction Manual
PLAY/PAIR
VOLUME
RECORD
SONGS
LIGHT
POWER
SMK470
ON
OFF
Included
Please make sure that the following items are included.
Manual
Microphone AC Adapter
The Singing Machine Company, Inc.
4060 E Jurupa Street, Unit B
Ontario, CA 91761-1413 USA
Copyright © 2017 All Rights Reserved.
PRINTED IN CHINA
470-1701-ENG01
Line-in Cable
INSTRUCTION MANUAL
www.singingmachine.com/kids
The Singing Machine® is a registered trademark of The Singing Machine Co., Inc.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The Caution marking is located on the bottom panel.
DANGEROUS VOLTAGE: The lightning flash with arrowhead
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
ATTENTION: The exclamation point within an equilateral
triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying this product.
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
INDUSTRY CANADA NOTICE:
This device complies with Industry Canada Iicense-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
DRIPPING WARNING: T his product shall not be exposed to dripping or
splashing, and no objects filled with liquids, such as vases, shall be placed
on the product.
VENTILATION WARNING: The normal ventilation of the product shall not be
impeded for intended use.
SAFETY VERIFICATION: This device is made and tested to meet safety
standards of the FCC, requirements and compliance with safety
performance of the U.S. Department of Health and Human Services and
also with FDA Radiation Performance Standards 21 CFR Subchapter.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the unit.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of t he ventilation openings. Install in
accordance with the Manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Do not place objects
filled with water, such as a vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device
and it should remain readily accessible and operable during
intended use. In order to completely disconnect the apparatus
from power, the mains plug should be completely removed
from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose
batteries to excessive heat such as sunshine, fire or other
heat sources.
CAN ICES-3(B)/NMB-3(B)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Class II equipment symbol.
This symbol indicates that the unit has a double insulation
system.
Warnings Troubleshooting Guide
Specifications
Important Safety Information
Should this unit exhibit a problem, check the following before seeking service:
No Power
• Power is not on; press the POWER button to turn power on.
• Confirm that the batteries are installed correctly.
No Sound – General
• Volume is set to minimum; raise volume by pressing VOLUME button.
• If using an external audio device, raise the volume on the device.
• Check if the LINE IN jack is still connected by a cable.
No sound from the microphone
• Make sure the microphone is firmly connected to the Microphone jack.
• Volume is set to minimum; raise volume by pressing VOLUME button.
Bluetooth reception failure
• Put the external BT device close to the unit.
• Pair the unit with the BT Device as the procedures stated in this manual.
AUDIO
Output Power .....................................................................................................2 Watts (RMS)
Output Impedance ...........................................................................................................4 Ohms
BLUETOOTH
Bluetooth Version .................................................................................................................. V4.1
Working Distance ............................................. Up to 10 meters measured in open space
LINE IN SECTION ..........................................................................3.5 mm Stereo line in jack
MICROPHONE SECTION ..................................................3.5mm Condensor Microphone
POWER SECTION
Battery (main unit) ..................DC6V (”AA” cell 1.5V x 4pcs) (batteries not included)
Battery (microphone) ...........DC3V (”A AA” cell 1.5V x 2pcs) (batteries not included)
Power Adaptor. ............................................................... . Input AC 100-240V ~ 50/60Hz
.......................................................................................Output DC 5V 0.6A (Positive Center)
DIMENSIONS .......................................... 9.5 X 3.7 X 9.6 inches/ 24.1 X 9.4 X 24.4cm
WEIGHT ..................................................................................................................3.1 lbs/1.4 kg
Specifications are subject to change without notice.
MIC
LINE IN
1.5V AAA/LR03
1.5V AAA/LR03
ON
OFF
1.5 V SIZE AAA
UM-4 OR LR03
1.5 V SIZE AAA
UM-4 OR LR03
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
Making the Connections
Operation
LINE IN CONNECTION
This unit is able to connect your favorite audio device (e.g.
iPhone/Tablet/MP3 player, etc.). You can connect your
device by using a provided cable (3.5mm audio cable). LINE
IN function is automatically selected once the audio cable is
plugged in.
Warning
- To avoid excessive over amplified sound output, it
is recommended that the volume control is initially
adjusted to one third or less and then increase if
required.
POWER ADAPTOR OPERATION
Insert the DC plug of the power adaptor into the DC jack on
the unit. Plug the other end into a standard AC outlet.
CAUTION:
- The AC Adaptor has a polarized plug that fits into
the wall outlet only one way. If the plug does not fit
properly, turn it over and try again. Do not force it.
BATTERY OPERATION
1. Switch off the Candy House unit and remove the AC
power adaptor from the power socket.
2. Remove the battery compartment cover on the back of
the main unit by using a Phillips-head screw driver.
3. Insert four (4) “AA” size alkaline batteries (not included)
as indicated on the right diagram.
4. Replace the cover tightly before operating.
CAUTION:
- Replace all batteries at the same time.
- Do not mix old batteries with new batteries.
MICROPHONE CONNECTION
1. Remove the battery compartment cover on the
body of the microphone by using a Phillips-head
screwdriver.
2. Insert two (2) “AAA” size alkaline batteries (not
included) as indicated on the right diagram.
3. Replace the cover tightly before operating.
4.
Connect the microphone into the microphone
jack.
Notes:
- Do not drop or tap the microphone as damage
to the microphone or speaker may occur.
- Do not twirl the microphone cord as it will cause
damage to the encased wiring.
BATTERY PRECAUTIONS
The precautions below should be followed when using batteries in this device:
1. Warning – Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. A
reversed battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer’s directions.)
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
ENERGY SAVING (AUTO POWER SYSTEM-APS)
The unit will automatically enter the Standby mode after 15
minutes in the following situations:
1. No button being pressed for 15 minutes.
2. No playback from your audio device for 15 minutes. The playback
of audio device had been stopped but the audio cable is still
plugged into the LINE IN jack.
3. Not singing to the microphone for 15 minutes. The Power
indicator will be turned off.
The unit can be resumed to turn on by pressing the Power button
once. APS is for energy saving purposes.
Microphone Jack
Line-In Jack
DC Jack
1
Connect the unit as described previously.
Press the POWER button to turn the unit
on; the power indicator will light on.
USING A BLUETOOTH DEVICE
2
The Bluetooth pair indicator will blink
rapidly to indicate it is in the pairing mode.
You may also press and hold the PLAY/
PAIR button to initiate the pairing mode.
Switch on the Bluetooth function of your Bluetooth compatible device within three feet
of the unit. You will see “Candy House” appear on your device’s search list. Select “Candy
House” to start pairing. Wait for completion of the pairing and the Bluetooth indicator will
light solid. Please always refer to the user manual of your bluetooth device for detailed
instructions.
Note:
If your Bluetooth device prompts you for a passcode during the pairing process, please enter
“0000” to connect. If pairing fails, repeat steps. If you have paired before, a list of previously
searched results will be displayed. Select “Candy House” again. On some Bluetooth devices
(i.e.,computers), once pairing is complete, you must select your Bluetooth device as “Use as
Audio Device” or similar.
PLAY/PAUSE: Press the Play/Pause button on the Bluetooth device or on the unit to start.
SING-ALONG WITH BUILT-IN SONGS
3
By pressing the LIGHT button to turn on
the roof top light effect, press again to
turn light effect off.
4
There are 3 built-in songs in this sing-
along unit. Press SONGS button once to
play the first songs, press once more to
play second song, press again to play the
third song.
SING-ALONG WITH LINE IN MUSIC
5
Connect the audio device to the LINE IN
jack on the back of this unit. It will allow the
audio to be played through your unit. LINE
IN function is automatically selected once
the audio cable is plugged in.
Note:
• It is highly recommended to set the volume
on the auxiliary unit to 1/3 or lower to
avoid distortion.
SING-ALONG WITH MICROPHONE
6
Connect the microphone into the microphone
jack at the back of the Candy House unit. Turn on
the microphone by slide the ON/OFF switch to
the ON position before singing, the microphone
light will switch ON. You can also connect an extra
microphone (not included) to another mic jack.
7
Adjust the volume to a comfortable level by
pressing the button VOLUME and VOLUME
button on the Candy House unit.
RECORDING YOUR SINGING:
8
To record your singing as well as the music,
press the RECORD button; recording will
begin and the Record/Playback indicator
will blink. When you want to finish the
recording, press the RECORD button again.
The Record/Playback indicator will stop
blinking.
Notes:
• There is up to 3 minutes and 40 seconds
recording time.
• Please note that each time when the new
recording is being recorded, the existing recording will be deleted.
PLAYBACK YOUR VOICE RECORDING:
9
To playback your voice recording, you can press the PLAY/PAIR button. The Record/
Playback indicator will light on. Press the PLAY/PAIR button again to stop.
MIC
LINE IN
1.5V AAA/LR03
1.5V AAA/LR03
ON
OFF
1.5 V SIZE AAA
UM-4 OR LR03
1.5 V SIZE AAA
UM-4 OR LR03
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
PLAY/PAIR
VOLUME
RECORD
SONGS
LIGHT
POWER
v
u
MIC
LINE IN
y
U
ON
OFF
MIC
LINE IN
y
U
ON
OFF
MIC
LINE IN
y
U
ON
OFF
MIC
LINE IN
y
U
U
ON
OFF
MIC
LINE IN
1.5V AAA/LR03
1.5V AAA/LR03
ON
OFF
1.5 V SIZE AAA
UM-4 OR LR03
1.5 V SIZE AAA
UM-4 OR LR03
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
1.5 V SIZE AA
UM-3 OR LR6
PLAY/PAIR
VOLUME
RECORD
SONGS
LIGHT
POWER
PLAY/PAIR
ME
RECORD
SONGS
LIGHT
POWER
PLAY/PAIR
VOLUME
RECORD
SONGS
LIGHT
POWER
w
x
v
X
V
V
W
u
MIC
LINE IN
y
U
U
ON
OFF
Loading...