The Siemon Company Block S66M1-50 Specifications
66 PRODUCTS
WWW
. SIEMON. COM
S66M1-50 BLOCK
The S66M1-50 is fully compatible with all industry standard accessories while
providing a proven, economical solution for terminating high performance
cable. The wide range of mounting accessories allows the S66M1-50 to be
installed in almost any environment.
Patented category 5e rated S66 quick clip reduces
reactive coupling between positions, improving
Near-End Crosstalk (NEXT) performance
The category 5e S66 block uses the same center
spacing between pairs as voice grade blocks and
is fully compatible with all industry standard 66
accessories (such as tools, test adapters,
mounting brackets, bridging clips, etc.)
Each pair of S66 clips is slightly closer
together, creating additional space between
conductors of adjacent pairs for reduced NearEnd Crosstalk
Category 5e S66
™
clip design provides
high-performance
and durability
High impact flame
retardant thermoplastic
Fanning strips provide management for
horizontal cabling and cross-connect
jumper wires and provides a labeling
surface for circuit identification
Mounts to S89 series stand-off brackets
to provide space for routing cables
behind each block
Terminates 20.81 - 0.41mm solid insulated cable
or 1.02 - 0.91mm solid stripped cable
10.2mm
5.1mm
10.2mm
4.8mm
Standard pair spacing
Category 5e pair spacing
25.7mm
19.7mm
Category 3 Category 5e
PROD-SS-66B Rev. H 6/03
© 2003 The Siemon Company
66 PRODUCTS
Siemon — EMEA HQ & UK
United Kingdom
Tel: +44 (0) 1483 480040
Siemon — France
Paris
Tel: +33 1 46 46 11 85
Siemon — Deutschland
Frankfurt
Tel: +49 (0) 69 97168 184
PRODUCT INFORMATION
Siemon — Italia
Milano
Tel: +39 (02) 64 672 209
WWW. SIEMON. COM
Because we are continuously improving our products, The Siemon Company
reserves the right to change specifications and availability without prior notice.
S66
™
is a trademark of The Siemon Company
For related product information request Spec Sheet(s):
Termination Tools (PROD-SS-S78)
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
Horizontal Cabling
Use the alternat-
ing fanning strip
slots for cross-
connect wires.
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
Horizontal Cabling
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
white - blue
blue - white
white - orange
orange - white
white - green
green - white
white - brown
brown - white
According to ANSI/TIA/EIA-568-B.1 and ISO/IEC 11801:2002, when terminating category 5e riser or horizontal cable, the
individual pairs must have their twists maintained within 13mm to the point of termination. When using the category 5e S66M1-50
block, The Siemon Company recommends that both conductors of each pair be inserted through the same slot in the fanning strip and
then split to the individual quick clips for termination. By doing this, the pairs will be inserted through every other slot in the fanning
strip. When cross-connect wire is installed, the cross-connect pairs can be inserted through the same slots in the fanning strip.
Category 5e cross-connect wire must be used to maintain categor y 5e per formance.
Use the same
fanning strip
slots for crossconnect wires.
Horizontal
Cabling
Horizontal
Cabling
S66™M1-50 Block:
S66M1-50...................Pair Capacity 50, Quick Clip: 500,
category 5e
height: 254mm, width: 86.4mm, depth: 30.5mm
Accessories:
Stand-off Brackets for S66 Blocks
S89B ...........................Stand-off mounting bracket, can mount
one 25-pair connector on each side
S89D ..........................Stand-off mounting bracket, can mount
two 25-pair connectors on each side
and four on the block
Bridging Clips
SA1-(XXXX).................
2-position bridging clip
SA1-SS-(XXXX)............
2-position bridging clip, stainless steel
Use (XXXX) to specify quantity:
100 = 100/bag, 1000 = 1000/bag
Stand-off Mounting Brackets
Lasting Hinge Covers
MC4LH-(X) ..................
Hinged protective plastic covers
Use (X) to specify colour:
2 = white, 3 = red, 4 = grey,
5 = yellow, 6 = blue, 7 = green,
8 = violet, 9 = orange
MC4 ...........................
Clear snap on cover
S89D stand-off bracket with
S66 block
S89B
S89D
Loading...