Thermos Alfi Care And Use Manual

C

CARE AND USE GUIDE

alfi™

GLASS VACUUM INSULATED CARAFE

IMPORTANT SAFEGUARDS

This alfi™ glass vacuum insulated product is designed for safe use. With all glass vacuum
insulated products, certain safeguards must be followed to prevent breakage. Glass vacuum
insulated product breakage can be accompanied by a loud noise and can cause glass and
contents to eject forcefully. The warranty does not cover glass or capillary breakage caused
by the customer or damage that occurs due to improper use. The warranty is also not valid in
cases of faults or defects arising from repairs or modifications implemented by unauthorized
third parties.

WARNINGS

• Glass breakage can cause burns or cuts to eyes, face, and hands.

• NOT RECOMMENDED FOR USE BY CHILDREN: Keep out of the reach of children,

especially when product contains hot contents, which may burn or scald user.

• DO NOT put hands, cleaning tools, or other objects including, but not limited to
cutlery, into container. DO NOT use to carry or store ice cubes. Anything other than
liquid can cause glass breakage.

• DO NOT place product in a freezer.

• Glass liners are fragile. If mishandled or dropped, the liner may break.

• Always check glass liner for breakage or cracks before each use.

• For maximum thermal efficiency and to reduce risk of glass liner breakage, preheat or

pre-chill product just prior to use. Fill with hot/cold tap water, attach lid, let stand 5 to
10 minutes and empty water. After filling container with contents, re-cover with lid to
increase thermal efficiency. Never use a microwave, conventional oven, or other
heat source for this purpose.

• DO NOT use product in microwave, on a drip coffee maker, on stove-top, or in any
type of oven.

• Periodically twist-tighten base to prevent from coming off.

• DO NOT drink directly from container.

• DO NOT overfill container: Leave space at top of container for lid and stopper (if

present) to avoid overflow. Hot contents may burn or scald user if overflow occurs.

• DO NOT fill with thick liquids such as soups, as these may block the spout and may
render the product inoperable.

• Always test temperature of contents before consuming.

• DO NOT look directly into product when filling; keep at arm’s length.

• After filling, always ensure stopper is securely tightened.

• DO NOT stir contents.

• Check periodically to make sure any gasket (flexible band around lid and/or stopper)

is present and properly positioned to prevent contents from passing through stopper
when stopper is closed (if applicable to product). Missing, worn or misaligned gasket
may cause product to leak. Leakage of hot contents may burn or scald user.

• This product is “FOR TABLE TOP USE ONLY”; DO NOT use this product to transport
liquids on-the-go as it may leak if not maintained in an upright position.

• In general, contents should not be left in container for longer than 24 hours.
However, the rate at which contents spoil depends on several factors. Certain
contents that include, for example, dairy and/or tomato may start to spoil sooner.
Proceed with caution when using the product with quick spoiling contents.

• If contents are left in container longer than 24 hours, or you suspect spoilage, use
caution when opening container. Contents spoilage can cause pressure inside
container to build, possibly leading to forceful ejection of stopper or contents. In such
circumstances, before attempting to open container, ENSURE THE OPENING IS
POINTED AWAY FROM THE USER OR OTHER PERSONS TO AVOID INJURY.

• DO NOT use to store or carry carbonated drinks or dry ice. This may cause
lid/stopper and contents to eject forcefully or leak.

• DO NOT use tools or devices to force container to open.

• If you are unable to open container by hand, do not open it and dispose of it at your

local waste facility.

GENERAL CARE

• Before first use, and as soon as possible after each use, wash all parts with warm,
soapy water. Rinse all parts thoroughly and allow time to dry. Store with stopper off.
Using any other methods of cleaning may damage glass liner and cause glass to
break or implode.

• Contents should not be left in the container for longer than 24 hours. As soon as
possible after each and every use, wash all parts with warm, soapy water. Rinse all
parts thoroughly with clean water. Allow all parts to dry completely prior to next use
or storage.

• DO NOT use abrasive soaps, scouring pads, brushes, or other objects to clean inside
of container.

• DO NOT use abrasive cleaners or scrubbers to clean outside of product since they
may dull finish.

• DO NOT use bleach or cleaners containing chlorine on any parts of product.

• HANDWASH ONLY - this product is not dishwasher safe.

• DO NOT immerse or soak in water for prolonged periods of time. Residual liquids,

foods, or other contents may become trapped between product components, such as

lid parts, container parts, gaskets (flexible band around lid and/or stopper), or straws
(if present in the product). Hand washing is recommended to ensure that all parts of
the product are thoroughly cleaned.

• For maximum thermal efficiency and to reduce risk of glass liner breakage, preheat or
pre-chill product just prior to use. Fill with hot/cold tap water, attach lid, let stand 5 to
10 minutes and empty water. After filling container with contents, re-cover with lid to
increase thermal efficiency. Never use a microwave, conventional oven, or other
heat source for this purpose.

ASSEMBLY & USE

Twist-and-Pour Lid (If Present):

Image for reference only: actual product may vary

1. Remove lid (A) by twisting counterclockwise.

2. Wash all parts separately, then re-assemble. See General Care section above for
washing instructions.

3. Fill container with contents. Do not overfill: Leave space for the lid, to avoid overflow.

4. Replace lid (A) by twisting clockwise.

5. To pour, twist lid (A) counterclockwise ½ - 1 turn. Proceed to pour. Note: Lid (A) does
not need to be removed completely to pour contents.

6. Re-tighten lid (A) by twisting clockwise.

Push-Lever Lid (If Present):

Image for reference only: actual product may vary

1. Remove lid (A) by twisting counterclockwise.

2. Wash all parts separately, then re-assemble. See General Care section above for
washing instructions.

a. Ensure gaskets (if present) are properly seated to minimize leaking.

3. Fill container with contents. Do not overfill: Leave space for the lid (A) to avoid
overflow.

4. Replace lid (A) by twisting clockwise. Depress the push-lever (A1) 2 to 3 times to
release pressure.

5. To pour, securely grip handle (B) and press push-lever (A1). Tilt product and pour
contents through spout (A2).

6. Bring product to an upright position and release push-lever (A1) to close.

Hinged Lid (If Present):

Image for reference only: actual product may vary

1. Lift lid (A) by pressing on the hinge lever (A1).

2. Wash all parts. See General Care section above for washing instructions.

3. Before filling, open lid (A) all the way. Fill container with contents.

a. Do not overfill: Leave space for the lid (A) to avoid overflow.

4. To pour, securely grip handle (B) and press and hold hinge lever (A1). Hinge lever
(A1) must be held while pouring to ensure easy flow of contents. Tilt product and pour
contents through spout (A2).

5. Bring product to an upright position and release hinge lever (A1).

6. To close, press down on the lid (A) into the lid opening until the lid (A) is secure.

a. Hinge lever (A1) may need to be adjusted to better align the lid and lid

opening.

LIMITED WARRANTY

Thermos L.L.C. warrants this Genuine Thermos Brand product to be free from defects in
material or workmanship for one year from date of purchase. This warranty does not cover
ordinary wear and tear or color fading, or any condition affected by abuse, neglect,
alteration, accident or improper use or maintenance.

We will, at our option, repair or replace any product component part that fails to conform to
this warranty within 30 days after its receipt by our factory service department. IN NO
EVENT WILL THERMOS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES.

Some jurisdictions do not allow the exclusion of incidental, consequential or special damages,
so the preceding exclusion may not apply to you.
This is a factory guarantee.
Please do not return this product to the retailer.

Send defective unit or component along with written explanation of defect directly to:
Thermos L.L.C. - Warranty Service
355 Thermos Road Batesville, MS 38606, USA
1-800-831-9242
www.thermos.com

In Canada:
1-800-669-7065
www.thermosbrand.ca
This warranty gives you specific legal rights and you may also have other rights, which vary
from state to state or province to province.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
REPRESENTATIONS OR CONDITIONS OF QUALITY AND PERFORMANCE, WHETHER
WRITTEN, ORAL OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SUCH IMPLIED
WARRANTIES, REPRESENTATIONS AND CONDITIONS ARE HEREBY DISCLAIMED. THE
REMEDIES STATED HEREIN CONSTITUTE PURCHASER’S EXCLUSIVE REMEDIES AND
THERMOS’S ENTIRE LIABILITY FOR ANY BREACH OF WARRANTY.

© 2017 Thermos L.L.C. All rights reserved.

THERMOS is a registered trademark in over 115 countries