Therma-Tek TJBSP18 User Manual

TSP18

(shown with optional casters)

NOTE: Stock pots supplied with casters must be

installed with an approved restraining device.

COMMERCIAL GAS STOCK POT RANGES

Therma-Tek Range Corp.

115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202

COMMERCIAL GAS STOCK POT RANGES

STANDARD FEATURES

✹

Fully stainless steel exterior.

✹

Sturdy base constructed of corrosion resistant aluminized steel.

✹

6” (152.5 mm) adjustable legs.

✹

Gas pressure regulator.

✹

Heavy, one piece cast iron top grate.

✹

Ignition by standing pilot.

✹

Drip pan is easily removed for cleaning.

✹

One year limited parts and labor warranty.

BURNERS

✹

One 100,000 BTUs (29.31 kW) three-ring cast iron burner (TSP18/36).

✹

One brass jet burner 135,000 BTUs (39.5kW) for high heat cooking (TJBSP18).

✹

Two infinite heat control valves per section on TSP models.

✹

One infinite heat control valve on model TJBSP18.

✹

Spill proof pilot ignition system.

OPTIONAL FEATURES

✹

6" (152.5 mm) casters.

✹

Gas flex hose w/ quick disconnect and restraining device.

✹

Double width model TSP36 available.

✹

Double depth model TSP18-2 available.

THERMA-TEK Sales Toll Free: 877-843-7835 Tel: [phone] Fax: [phone] [e-mail] www.therma-tek.com

COMMERCIAL GAS STOCK POT RANGES

A

CHAR BROILERS GRIDDLES

TSP36

45

3
8

"

[1152.53mm]

15
16

"

[24.24mm]

25

3
8

"

[644.53mm]

B

[184.15mm]

7

1
4

" MAX

6" MIN

[152.40mm]

GAS INLET
ON REAR

TO

[466.44mm]

18

3
8

"

TSP18

18

3
8

"

[466.73mm]

72"

[1828.80mm]

1

13
16

"

[46.04mm]

60"

[1524.00mm]

TSP36

45

3
8

"

[1152.53mm]

B

18

3
8

"

[466.73mm]

Dimension “A” Dimension “B”

Model Number inches mm inches mm

TSP18 18 457 20.25 514
TSP18-2 18 457 20.25 514
TSP36 36 915 20.25 514

TJBSP18 18 457 11.875 301.5

Therma-Tek Range Corp.

115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202

GAS REQUIREMENTS

Operating Manifold Gas Pressure

Input Rating per Burner

Natural Propane Manifold Connection Three-ring Cast Iron Burner Brass Jet Burner

“WC mbar “WC mbar Total BTU/Hr kW Total BTU/Hr kW
5 12.45 10 24.9 3/4” NPT 100,000 29.31 135,000 39.56

Total gas consumption per model Gross Weight

Model Number Total BTU/Hr kW Lbs. Kg

TSP18 100,000 29.31 150 68.10

TSP18-2 200,000 58.62 315 143.01
TSP36 200,000 58.62 315 143.01
TJBSP18 135,000 39.56 150 68.10

NOTE: Add suffix “N” for natural gas, and “L” for propane.

CLEARANCES Sides Back
Non Combustible 0” 0”
Combustible 12” (304.8 mm) 12” (304.8 mm)

Installation Notes

This product is NOT approved for residential use.
Please advise us of installation over 2000ft. (610m) altitude.
Installation clearance reduction applies only where local codes permit.
All Therma-Tek products are covered by a one year limited parts and labor warranty.
A detailed warranty is included with the appliance or is available upon request.
Installation and/or operation by other than manufacturer’s recommendations may void warranty.

Because of continuing product improvement, these specifications are subject to change without notice.

THERMA-TEK Sales Toll Free: 877-843-7835 Tel: [phone] Fax: [phone] [e-mail] www.therma-tek.com

Printed July 2008
Printed in the USA