THERMA-TEK RANGE CORPORATION
“QUALITY AND STRENGTH”
FULL-SIZE GAS
CONVECTION OVEN PARTS / SERVICE MANUAL
Model TFCO-GM-1 covered in this manual is shown with optional casters.
_____________________
________________
THERMA-TEK RANGE CORPORATION
115 ROTARY DRIVE – VALMONT IND. PARK
WEST HAZLETON, PA
TEL: 570-455-3000 FAX: 570-455-9491 WEB: WWW.THERMA-TEK.COM
INTRODUCTION
The Full-Size Gas Convection Oven Parts / Service Manual contains Installation and Operation Recommendations. It also includes Troubleshooting and Technical Data such as Orifice Hood Sizing and Gas Pressure Requirements.
The material presented should be used in conjunction with the Owner’s Manual, Professional Training, Service Experience, and Industry Standard Practices.
TABLE OF CONTENTS__________PAGE
Model Number Identification………………………………….3 Full-Size Gas Convection Oven Standard Features...…………3
Rating Plate Location……………………………………….....3 Identifying the Age of Equipment by Warranty Number……..4 Gas and Electrical Requirements.……….,…………………....5 Wiring Diagram………………………………………………..6 Troubleshooting Guide………………………………………...7 Parts – Exploded View and Detail List…………………..8 – 10 Notes………………………………………………………….11
2
MODEL NUMBER IDENTIFICATION
TFCO-GM-1 (N OR L)
T (Therma) F (Full-size) C (Convection) O (Oven)
G (Gas) M (Manual control) – 1 (Single deck)
The Final Character N or L (NATURAL or LP Gas).
STANDARD FEATURES
60,000 BTU’s /Hr. Natural Gas. 54,000 BTU’s / Hr. Propane Gas. Single door w/ heavy duty refrigerator latch.
Electro-mechanical control snap-action thermostat. ½Hp 2 speed motor.
Six chrome plated racks w/ 12 rack positions. Pressure regulator.
Stainless steel front, sides, top, legs, and single deck shelf. 3 wire, 15 amp cord and plug provided.
RATING PLATE LOCATION
The rating plate is located on the right – front of the oven – above the control panel. It contains the warranty serial number, installation clearances, and gas pressure information.
3
WARRANTY SERIAL NUMBER THERMA-TEK SERIAL NUMBER & DATE CODE
Date of manufacture is a date code and is part of the serial number.
(a) (c) Example: 09J00001A
(b)(d)
(a)Year Code: Use the last two digits of the year. 07 = 2007 08 = 2008 09 = 2009
(b) Month Code: A=Jan, B=Feb, C=Mar, D=Apr, E=May, F=Jun, G=Jul, H=Aug, I=Sep J=Oct, K=Nov, L=Dec
(c)5 Digit Serial Number: This number is reset to zero on the new year.
(d) Engineering Digit: “A” is used for new release. Anytime a design element is changed that would affect service, this digit would be changed to “B”. Each time a change is made, the letter is changed going down through the alphabet.
4
Loading...