Therma-Tek TCTYG36 User Manual

HEAVY DUTY GAS TEPPAN-YAKI GRIDDLES

Therma-Tek Range Corp.

115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202

TCTYG36

GAS TEPPAN-YAKI GRIDDLES (Translation “Iron Plate-Grilled”)

GENERAL SPECIFICATIONS

Heavy duty gas Teppan-Yaki griddles built on welded angle iron frame construction for strength and durability. Single burner
controlled by a reliable, full-range brass valve. Removable grease container is provided for easy cleaning. Standard model sizes are
24” (610 mm), 36” (915 mm), 48” (1,219 mm), 60” (1,524 mm), and 72” (1,829 mm).

STANDARD FEATURES

✹

Fully stainless steel exterior

✹

3/4” thick, highly polished steel plate

✹

24” (610 mm) working depth

✹

One heavy duty round burner to create a hot spot in
the center of the griddle

✹

Burner rated at 30,000 BTU’s per hour

✹

Spatula width stainless steel grease trough

✹

Large capacity grease container

✹

Gas pressure regulator

✹

4” (101.5 mm) adjustable legs

✹

One year limited parts and labor warranty

OPTIONAL UNIT FEATURES

✹

1” thick griddle plate

✹ 1/2” stainless steel side and rear plate splash
✹ Stainless steel finished panel trim kit – sides and rear

OPTIONAL STAND

✹

Stainless steel equipment stand with stainless steel bottom shelf

✹

Chrome-plated leveling feet

✹

Available sizes 24” (610 mm), 36” (915 mm), 48” (1,219 mm),
60” (1,524 mm), and 72” (1,829 mm)

✹

Casters – set of four – front locking

THERMA-TEK Sales Toll Free: 877-843-7835 Tel: [phone] Fax: [phone] [e-mail] www.therma-tek.com

HEAVY DUTY GAS TEPPAN-YAKI GRIDDLES

Therma-Tek Range Corp.

115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202

TCTYG36

GAS REQUIREMENTS

Operating Manifold Gas Pressure

Natural Propane Manifold Connection Input Rating per Burner

“WC mbar “WC mbar Total BTU/Hr kW
5 12.45 10 24.9 3/4” NPT 30,000 8.79

Dimension “A”

Model Number inches mm

TCTYG24 24 610
TCTYG36 36 915
TCTYG48 48 1219
TCTYG60 60 1524
TCTYG72 72 1829

Total gas consumption per model Gross Weight

Model Number Description: 3/4” Plate w/o Splash Total BTU/Hr kW Lbs. Kg

TCTYG24 24” Teppan-Yaki Griddle with 3/4” Plate 30,000 8.79 250 114
TCTYG36 36” Teppan-Yaki Griddle with 3/4” Plate 30,000 8.79 340 154
TCTYG48 48” Teppan-Yaki Griddle with 3/4” Plate 30,000 8.79 435 197
TCTYG60 60” Teppan-Yaki Griddle with 3/4” Plate 30,000 8.79 600 272
TCTYG72 72” Teppan-Yaki Griddle with 3/4” Plate 30,000 8.79 700 318

Total gas consumption per model Gross Weight

Model Number Description: 1” Plate w/o Splash Total BTU/Hr kW Lbs. Kg

TCTYG24-1 24” Teppan-Yaki Griddle with 1” Plate 30,000 8.79 333 151
TCTYG36-1 36” Teppan-Yaki Griddle with 1” Plate 30,000 8.79 453 206
TCTYG48-1 48” Teppan-Yaki Griddle with 1” Plate 30,000 8.79 580 263
TCTYG60-1 60” Teppan-Yaki Griddle with 1” Plate 30,000 8.79 800 363
TCTYG72-1 72” Teppan-Yaki Griddle with 1” Plate 30,000 8.79 933 434

NOTE: Add suffix “N” for natural gas, and “L” for propane.

CLEARANCES Sides Back
Non Combustible 0” 0”
Combustible 0” 0”

Installation Notes

This product is NOT approved for residential use.
Please advise us of installation over 2000ft. (610m) altitude.
Installation clearance reduction applies only where local codes permit.
All Therma-Tek products are covered by a one year limited parts and labor warranty.
A detailed warranty is included with the appliance or is available upon request.
Installation and/or operation by other than manufacturer’s recommendations may void warranty.

Because of continuing product improvement, these specifications are subject to change without notice.

Printed January 2011
Printed in the USA

THERMA-TEK Sales Toll Free: 877-843-7835 Tel: [phone] Fax: [phone] [e-mail] www.therma-tek.com