Therma-Tek TCM36 User Manual
TCM36
COMMERCIAL GAS INFRA-RED CHEESEMELTER
Therma-Tek Range Corp.
115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202
COMMERCIAL GAS INFRA-RED CHEESEMELTER
STANDARD FEATURES
✹
Fully stainless steel exterior.
✹
Interior surfaces corrosion resistant aluminized steel.
✹
Gas pressure regulator.
✹
Rapid fire infra-red tile burners.
✹
20,000 BTUs (5.86 kW) or 30,000 BTUs (8.79 kW) depending upon model.
✹
Each burner is individually controlled.
✹
Ignition by standing pilot for each burner.
✹
One nickel plated shelf sized to model width.
✹
Rack has four adjustable positions.
✹
Drip pan is easily removed for cleaning.
✹
Available in 24”, 36”, 48”, 60”, and 72” widths.
✹
One year limited parts and labor warranty.
OPTIONAL FEATURES
✹
ICPK (interconnecting piping) between cheesemelter and range.
✹
Stainless steel bottom.
✹
RMK (Range Mount Kit).
✹
CMK (Counter Mount Kit).
✹
WMK (Wall Mount Kit).
✹
Additional shelves sized to model width.
THERMA-TEK Sales Toll Free: 877-843-7835 Tel: 570-455-3000 Fax: 570-455-9491 info@therma-tek.com www.therma-tek.com
COMMERCIAL GAS INFRA-RED CHEESEMELTER
72"
[1828.80mm]
TC72G
TC72TG
1
13
16
"
[46.04mm]
Therma-Tek Range Corp.
115 Rotary Drive, Valmont Industrial Park
West Hazleton, PA 18202
8"
[203.75mm]
9
"
1
16
[39.69mm]
TCM36
Operating Manifold Gas Pressure
Natural Propane Manifold Connection Input Rating per Burner*
“WC mbar “WC mbar Total BTU/Hr kW Total BTU/Hr kW
5 12.45 10 24.9 1/2” NPT 20,000 5.86 30,000 8.79
*Used individually and in combination depending on model
7
8
8
[225.43mm]
A
GAS REQUIREMENTS
17
3
4
"
3
16
"
[425.45mm]
"
4
[450.85mm]
1
2
8
[53.98mm]
"
Total gas consumption per model Gross Weight
Model Number Description Total BTU/Hr kW Lbs. Kg
TCM24 One infra-red burner 20,000 5.86 115 52.21
TCM36 One infra-red burner 30,000 8.79 172 78.09
TCM48 Two infra-red burners 40,000 11.72 220 99.88
TCM60 Two infra-red burners 50,000 14.65 290 131.66
TCM72 Two infra-red burners 60,000 17.58 350 158.90
NOTE: Add suffix “N” for natural gas, and “L” for propane.
CLEARANCES Sides Back
Non Combustible 0” 0”
Combustible 6” (152.4 mm) 6” (152.4 mm)
Installation Notes
This product is NOT approved for residential use.
Please advise us of installation over 2000ft. (610m) altitude.
Installation clearance reduction applies only where local codes permit.
All Therma-Tek products are covered by a one year limited parts and labor warranty.
A detailed warranty is included with the appliance or is available upon request.
Installation and/or operation by other than manufacturer’s recommendations may void warranty.
Because of continuing product improvement, these specifications are subject to change without notice.
Dimension “A”
Model Number inches mm
TCM24 24 610
TCM36 36 915
TCM48 48 1219
TCM60 60 1524
TCM72 72 1829
Printed March 2014
Printed in the USA
THERMA-TEK Sales Toll Free: 877-843-7835 Tel: 570-455-3000 Fax: 570-455-9491 info@therma-tek.com www.therma-tek.com
Loading...