Freedom to personalize. Freedom to go modular. Freedom to integrate your refrigeration with the
design of your kitchen. That’s what makes Thermador Freedom® Refrigeration the leader in true ush,
tall door design. Unlike the old-fashioned, force-t restrictions of semi-ush products, Freedom®
Refrigeration solutions integrate seamlessly into your kitchen design, with custom fronts and
concealed venting grille.
Our portfolio of custom panel models—available in 18", 24", 30" and 36" widths—offers the most
design choices in the industry, allowing you to congure your own unique combination of bottom
freezers, fresh food, freezer and wine preservation columns. And nothing beats the convenience
of our pre-assembled bottom freezers, ready to install straight from the factory. Equipped with at
stainless steel panels and either Professional or Masterpiece® Handles set off by a removable stainless
steel frame, these units deliver perfect built-in t and aesthetics in a 24" or 25" deep cabinet.
322
FREEDOM
®
REFRIGERATION
1.800.735.4328 | THERMADOR.COM
323
THE NEXT
GENERATION OF
REFRIGERATION
When it comes to refrigeration, culinary enthusiasts want more than mere preservation. They want
personalization. Thermador Culinary Preservation Centers offer an amazing array of refrigerator, freezer and
wine center combinations that allow for exibility and customization in the kitchen. Combine a French door
bottom freezer with a wine column. Make a dramatic statement with wine storage anked by freezer and
refrigerator columns. Today’s afuent consumers are leaving yesteryear’s semi-ush products for fully-ush,
integrated refrigeration to achieve the design they envision. Culinary Preservation Centers offer conguration
possibilities that are an exciting departure from the rigid conformity of side-by-side replacement options.
Be inspired.
EXPERIENCE THE FREEDOM TO DO MORE WITH THERMADOR.
324
THE ULTIMATE CULINARY PRESERVATION CENTERS
EXCLUSIVE DETAILS
ULTIMATE ENTERTAINER
• 30" Fresh Food
• 24" Wine Column
• 30" Fresh Food/Freezer
HOLIDAY ENTERTAINER
• 36" Side-Swing Door Fresh Food/
Freezer
WEEKEND ENTERTAINER
• 30" Fresh Food
• 18" Wine Column
• 30" Fresh Food/Freezer
ORGANIC FAMILY
• 36" French Door Fresh Food/
Freezer
SOCIAL ENTERTAINER
• 36" French Door Fresh Food/Freezer
• 24" Wine Column
MARKET FRESH ENTERTAINER
• 36" Side-swing Door Fresh Food/
Freezer
CONTEMPORARY FAMILY
• 30" Fresh Food
• 24" Wine Column
• 36" Fresh Food/Freezer
EVERYDAY COOK
• 36" French Door Fresh Food/Freezer
URBAN FAMILY
• 24" Fresh Food
• 18" Freezer
HEALTHY FAMILY
• 36" Side-swing Door Fresh Food/Freezer
WEEKDAY ENTERTAINER
• 30" Fresh Food
• 18" Freezer
• 24" Wine Column
• 18" Wine Column
• 18" Wine Column
®
These are creative illustrations meant to display the exibility of the Thermador Freedom
Please refer to the Thermador Kitchen Design and Planning Guide for all dimensions, specications, and other requirements
Collection and column refrigeration versatility.
326
FREEDOM
®
REFRIGERATION
FREEDOM® COLLECTION
DESIGN INSPIRATION
The Thermador Freedom® Collection facilitates a complete range of new and unique possibilities for your cutting-edge kitchen design. Choose
models with custom panels for fully ush integration into the surrounding kitchen cabinetry or pre-assembled bottom freezers for popular,
effortless installations.
All models are stand-alone independent units— use your imagination to arrange them into your kitchen as desired —either as single columns or
in a wide array of possible side-by-side combinations. It’s complete freedom of choice — and freedom of kitchen design.
KITCHEN DESIGN BY: STEVEN BRICKER, MURPHY MEARS ARCHITECTS & WM. T. CANNADY
1.800.735.4328 | THERMADOR.COM
327328
FREEDOM® COLLECTION
DESIGN INSPIRATION
FREEDOM
®
REFRIGERATION | DESIGN INSPIRATION
1.800.735.4328 | THERMADOR.COM
329
330
UNLIMITED FLEXIBILITY
IN BOTH FUNCTION
AND DESIGN
THEATER LED LIGHTING
Theater LED lighting fades in when the unit is opened
and illuminates all items from the front and sides—
so that all food can be seen—and nothing remains
overlooked or forgotten.
FREEDOM HINGE
Engineered specically for the Freedom® Collection,
all units feature a heavy-duty hinge that can open
to 115º, allowing full-height, integrated doors and
Truly Flush Mounted™ installation without sacricing
accessibility.
PERFECT INSTALLATION
Our unique door panel design allows for perfect
adjustability. Every door panel can be adjusted
horizontally, vertically, forward and backward to ensure
an ultra-ush installation.
FREEDOM
®
REFRIGERATION | FEATURES & BENEFITS
PRE-ASSEMBLED CONVENIENCE
Pre-assembled bottom freezers are ready to install and
are equipped with at stainless steel panels and either
Professional or Masterpiece® handles. With a removable
stainless steel frame, these units offer a perfect built-in
t in a 24 or 25-inch deep cabinet.
DEDICATED EVAPORATOR & COMPRESSOR
SYSTEMS
Each Fresh Food and Freezer column has its own
evaporator and compressor to eliminate odor transfer
and keep food fresher, longer, with better humidity
and air ow.
BUILD YOUR CUSTOM COLUMN
Our award winning Freedom® Collection offers
customized columns in three simple steps.
– First, choose your unit: Fresh Food, Freezer, Bottom-
Freezer or Wine Preservation Column.
– Second, choose your panel: ush — for a fully integrated
look, or chiseled—to match the rest of your Thermador
family of appliances. Or opt for a custom panel for
seamless integration with the rest of your cabinetry.
– Third, choose your handle: Professional, Masterpiece®
or custom handles.
1.800.735.4328 | THERMADOR.COM
331
FREEDOM®
COLLECTION
FRESH FOOD
COLUMN
TEMPERATURE-CONTROLLED DRAWERS
FlexTemp® drawers ensure the perfect storage
and preservation of meats, sh and produce with
dedicated convertible temperature settings.
FULL-EXTENSION DRAWERS
Full-extension drawers offer convenient access.
Drawers can even be opened with a 90° door
opening, accommodating many kitchen designs.
Drawer rails are designed to glide perfectly even
when fully loaded.
DOOR STORAGE
Maximize shelf space with large door bins,
multiple conguration options, and gallon door
storage. Innovative “cool door” design allows air
to circulate behind door bins, keeping them as
cool as interior shelving.
332
FREEDOM®
COLLECTION
FREEZER
COLUMN
ULTRA CAPACITY DIAMOND ICE DRAWER
Full width ice drawer with exible ice bin allows
you the option to place the bin on the left or right
hand side of the drawer. Entertaining? Simply
remove the ice bin and use the entire drawer for
your Diamond ice—stores up to 10 pounds.
HIDDEN ICE MAKER
Hidden compartment houses the ice maker in an
inconspicuous design.
FULL-EXTENSION DRAWERS AND
OVERSIZED FREEZER BASKETS
Full-extension drawers offer convenient access.
Drawers can even be opened with a 90° door
opening, accommodating many kitchen designs.
Drawer rails are designed to glide perfectly even
when fully loaded.
CATEGORY | FEATURES & BENEFITS
FREEDOM
®
REFRIGERATION | FEATURES & BENEFITS
STAINLESS STEEL EXTERIOR ICE & WATER
DISPENSER
An industry rst: our freezer units offer a fully
stainless steel exterior ice and water dispenser,
integrating perfectly with the Thermador® stainless
steel door panels, as well as all other Thermador
stainless steel products.
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
333
333
FREEDOM®
COLLECTION
BOTTOM FREEZER
DUAL EVAPORATOR AND DUAL
COMPRESSOR SYSTEMS
Each cooling compartment—refrigerator
and freezer— has its own evaporator and
compressor to eliminate odor transfer
and keep food fresher, longer, with better
humidity and air ow.
DOOR STORAGE
Maximize shelf space in bottom freezers
with large door bins, multiple conguration
options, and gallon door storage.
FULL-EXTENSION DRAWERS AND
FREEZER BASKETS
Full-extension drawers offer convenient
access and can even operate with a 90°
door opening. Drawer rails are designed to
glide perfectly even when fully loaded.
DELI DRAWER
Complement market-fresh meats, sh and
dairy products with a perfectly chilled fullextension deli drawer.
334
FREEDOM®
COLLECTION
WINE PRESERVATION
WINE PRESERVATION COLUMNS
Our Freedom® Wine Preservation Collection redenes
the home wine cellar. Perfect for storing bottles in
various sizes, serving at a dinner party or aging the
choicest bottles to perfection, this appliance is the wine
connoisseur’s newest best friend. It is also a deliciously
stylish way to display food when entertaining.
DUAL INDEPENDENT TEMPERATURE AND
HUMIDITY CONTROL
Store any wine collection at the perfect temperature
and humidity. Our electronic control board allows you
to adjust each zone independently—and keeps wines
perfectly preserved.
FULL-EXTENSION EXOTIC WOOD RACKS
Completely redesigned wine storage features thoughtful
rack spacing and exible storage options. Luxurious,
full-extension exotic wood racks enhance the experience
of pulling out your favorite vintage.
CATEGORY | FEATURES & BENEFITS
FREEDOM
®
REFRIGERATION | FEATURES & BENEFITS
5-BOTTLE PRESENTER
Inside the appliance an added aluminum 5-bottle
presenter ensures the best bottles are center stage.
Remove it to double as a handy bar or tabletop
presentation option.
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
335
335
T24IR800SP
24-INCH FLUSH CUSTOM FRESH FOOD COLUMN
FREEDOM® COLLECTION, PANEL-READY
GENERAL PROPERTIES
Panel ReadyYes
Reversible Door SwingYes
Carbon Air FilterYes
LightingAll-LED Sidewall and
Full Width Shelves4
Adjustable Shelves3
Shelf MaterialGlass w/Metal Trim
Full Extension Drawers at 90° Door Opening Angle Yes
Temperature Controlled DrawerYes
Humidity Control DrawerYes
Door Bins4
Gallon Door BinsYes
Door Open AlarmYes
Special ModesSabbath, Economy,
CAPACITY
Total Unit Gross Capacity (cu. ft.) - AHAM13.2 cu. ft.
Refrigerator Gross Capacity (cu. ft.)13.2 cu. ft.
PERFORMANCE
FEATURES & BENEFITS
®
- Freedom
- Full-height door–true cabinet integration without exposed
venting grille
- Brightspace interior design with All-LED sidewall and theater
lighting
- FLEXTEMP
- Accepts custom or stainless steel panels
TEMPERATURE RANGES
Refrigerator35°F (2°C) to 46°F (8°C)
Temperature Controlled DrawerFish 32°F (0°C)
Deli DrawerJust above 32°F (0°C)
SuperCool35.5°F (2°C) for
Energy Saving (Economy) Mode45°F (7°C)
See page 365 for accessories.
Hinge enables true ush design
®
drawer providing the ultimate in preservation
Meat 35°F (1.5°C)
Produce 37°F (3°C)
approximately 9 hours
Dedicated Evaporator & Compressor SystemYes
®
Freeow
SuperCoolYes
TECHNICAL DETAILS
Watts (W)180 W
Current (A)15 A
Volts (V)120 V
Frequency (Hz)60 Hz
Power Cord Length (in.)78 3/4"
Plug Type120V 3-Wire
DIMENSIONS & WEIGHT
Appliance Dimensions (H x W x D) (in.)84" x 23 3/4" x 24"
Required Cutout Size (H x W x D) (in.)84" x 24" x 24 3/4"
Net Weight (lbs)309 lbs
EFFICIENCY
ENERGY STAR® QualiedYes
Annual Energy Consumption283 kWh
WARRANTY
Limited, Entire Appliance, Parts and Labor on
Any Part of the Refrigerator that Fails Because
of a Manufacturing Defect
Limited Warranty for Sealed Refrigeration
System*; Parts and Labor
Limited Warranty for Sealed Refrigeration
System*; Parts Only
* Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and
connection tubing
Cold Air SystemYes
Theater Lighting
Vacation
2 Year
3rd to 6th Year
7th to 12th Year
336
T30IR800SP
30-INCH FLUSH CUSTOM FRESH FOOD COLUMN
FREEDOM® COLLECTION, PANEL-READY
GENERAL PROPERTIES
Panel ReadyYes
Reversible Door SwingYes
Carbon Air FilterYes
LightingAll-LED Sidewall and
Full Width Shelves4
Adjustable Shelves3
Shelf MaterialGlass w/Metal Trim
Full Extension Drawers at 90° Door Opening Angle Yes
Temperature Controlled DrawerYes
Humidity Control DrawerYes
Door Bins4
Gallon Door BinsYes
Door Open AlarmYes
Special ModesSabbath, Economy,
CAPACITY
Total Unit Gross Capacity (cu. ft.) - AHAM17.2 cu. ft.
Refrigerator Gross Capacity (cu. ft.)17.2 cu. ft.
PERFORMANCE
FEATURES & BENEFITS
®
- Freedom
- Full-height door–true cabinet integration without exposed
venting grille
- Brightspace interior design with All-LED sidewall and theater
lighting
- FLEXTEMP
- Accepts custom or stainless steel panels
TEMPERATURE RANGES
Refrigerator35°F (2°C) to 46°F (8°C)
Temperature Controlled DrawerFish 32°F (0°C)
Deli DrawerJust above 32°F (0°C)
SuperCool35.5°F (2°C) for
Energy Saving (Economy) Mode45°F (7°C)
See page 365 for accessories.
Hinge enables true ush design
®
drawer providing the ultimate in preservation
Meat 35°F (1.5°C)
Produce 37°F (3°C)
approximately 9 hours
Dedicated Evaporator & Compressor SystemYes
®
Freeow
SuperCoolYes
TECHNICAL DETAILS
Watts (W)180 W
Current (A)15 A
Volts (V)120 V
Frequency (Hz)60 Hz
Power Cord Length (in.)78 3/4"
Plug Type120V 3-Wire
DIMENSIONS & WEIGHT
Appliance Dimensions (H x W x D) (in.)84" x 29 3/4" x 24"
Required Cutout Size (H x W x D) (in.)84" x 30" x 24 3/4"
Net Weight (lbs)332 lbs
EFFICIENCY
ENERGY STAR® QualiedYes
Annual Energy Consumption310 kWh
WARRANTY
Limited, Entire Appliance, Parts and Labor on
Any Part of the Refrigerator that Fails Because
of a Manufacturing Defect
Limited Warranty for Sealed Refrigeration
System*; Parts and Labor
Limited Warranty for Sealed Refrigeration
System*; Parts Only
* Sealed refrigeration system includes compressor, evaporator, condenser, dryer / strainer and
connection tubing
A Frame Kit enables installation of all Freedom Columns in 24-inch deep cutouts. See page 365 for details.
FREEZER COLUMNS
WATERCUBES CRUSHED AGITATIONLOCKLIGHT
WATERCUBES CRUSHED AGITATIONLOCKLIGHT
WATER CUBES CRUSHEDAGITATION LOCK LIGHT
WATER CUBES CRUSHED AGITATIONLOCK LIGHT
356
T18ID800LP
18-Inch
External
Ice & Water
Dispenser
Left-Hand
Door Swing
Build Your
Custom Column
T18ID800RP
18-Inch
External
Ice & Water
T18IF800SP
18-Inch
Dispenser
Right-Hand
Door Swing
Build Your
Custom Column
Reversible
Door Swing
Build Your
Custom Column
T24ID800LP
24-Inch
External
Ice & Water
Dispenser
Left-Hand
Door Swing
Build Your
Custom Column
T24ID800RP
24-Inch
External
Ice & Water
Dispenser
Right-Hand
Door Swing
Build Your
Custom Column
T24IF800SP
24-Inch
Reversible
Door Swing
Build Your
Custom Column
T30IF800SP
30-Inch
Reversible
Door Swing
Build Your
Custom Column
FREEDOM® COLLECTION
30”36”36”
APPLIANCE OVERVIEW
CATEGORY | PLANNING INFORMATION
FREEDOM
BOTTOM FREEZERS
T30IB800SP
30-Inch
2-Door
Reversible
Door Swing
Build Your
Custom Column
T36IB800SP
36-Inch
2-Door
Reversible
Door Swing
Build Your
Custom Column
T36IT800NP
36-Inch
French Door
Build Your
Custom Column
®
REFRIGERATION | PLANNING INFORMATION
PRE-ASSEMBLED BOTTOM FREEZERS*
T30BB810SS
30-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Masterpiece®
Handles
T30BB820SS
30-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Professional
Handles
T36BB810SS
36-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Masterpiece®
Handles
T36BB820SS
36-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Professional
Handles
T36BT810NS
36-Inch
French Door
Flat Stainless
Steel Panels
Masterpiece®
Handles
T36BT820NS
36-Inch
French Door
Flat Stainless
Steel Panels
Professional
Handles
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
*Pre-assembled bottom freezers can be installed ush in 25-inch deep cutouts or with included frame in 24-inch deep cutouts.
357
357
FREEDOM® COLLECTION
30”24”18”
36”
T30IR800SP
T36IT800NP
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T36IT800NP
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
TCH24IR800
TCH30IR800
TFL24ID800
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
TCH24IR800
TCH30IR800
TCH24ID800TCH18ID800
TFL24ID800
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IT800NP
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
TCH24IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IT800NP
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T36IT800NP
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
BUILDING YOUR CUSTOM COLUMN
1
CHOOSE UNIT
FRESH FOOD COLUMN – FULLY FLUSH COLLECTION
24"
30"
FREEZER COLUMN – FULLY FLUSH COLLECTION
18"
18"
24"
24"
T24IR800SP
Reversible
Swing
Custom
Column
T30IR800SP
Reversible
Swing
Custom
Column
T18ID800RP
Right-Hand
Swing
External Ice &
Water Dispenser
Custom
Column
T18IF800SP
Reversible
Swing
Internal
Ice Maker
Custom Column
T24ID800RP
Right-Hand
Swing
External Ice &
Water Dispenser
Custom
Column
T24IF800SP
Reversible
Swing
Internal
Ice Maker
Custom Column
T18ID800LP
Left Hand
Swing
External Ice &
Water Dispenser
Custom
Column
T24ID800LP
Left Hand
Swing
External Ice &
Water Dispenser
Custom
Column
2
CHOOSE PANEL
(All units are panel-ready for custom
panel installation)
TFL24IR800
Flat
Stainless Steel
TFL30IR800
Flat
Stainless Steel
TFL18ID800
Flat
Stainless Steel
with Dispenser
TFL18IR800
Flat
Stainless Steel
TFL24ID800
Flat
Stainless Steel
with Dispenser
TFL24IR800
Flat
Stainless Steel
TCH24IR800
Chiseled
Stainless Steel
TCH30IR800
Chiseled
Stainless Steel
TCH18ID800
Chiseled
Stainless Steel
with Dispenser
TCH18IR800
Chiseled
Stainless Steel
TCH24ID800
Chiseled
Stainless Steel
with Dispenser
TCH24IR800
Chiseled
Stainless Steel
3
CHOOSE HANDLE
AND OPTIONAL FRAME
NOTE: Choose one handle for
each column, 2 handles for each
2-door bottom freezer and
3 handles for each French
Door bottom freezer.
PR36HNDL10
36-Inch Professional Handle
Coordinates with Thermador
Professional
MS36HNDL10
36-Inch Masterpiece
Coordinates with Thermador
Masterpiece
FRAMEKIT10
This accessory enables installation in
24-inch deep cutouts. Kit includes two
identical and
reversible vertical frames.
®
Series appliances
®
Handle
®
Series appliances
WATERCUBES CRUSHEDAGITATION LOCKLIGHT
30"
IMPORTANT: Use a sealing kit when connecting refrigerator and freezer columns side-by-side (included with every freezer column). Use HEATRKIT10 for all non-traditional side-by-side combinations,
installations where columns are not connected but less than six inches (152 mm) from one another and for any installation in areas subject to excessive humidity. See page 365for details.
358
T30IF800SP
Reversible
Swing
Internal
Ice Maker
Custom Column
TFL30IR800
Flat
Stainless Steel
TCH30IR800
Chiseled
Stainless Steel
FREEDOM® COLLECTION
30”24”18”
36”
T36IB800SP
T36IT800NP
36”
36”
36”
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IT800NP
30”24”18”
36”
T30IR800SP
T36IT800NP
30”36”36”
BUILDING YOUR CUSTOM COLUMN
CATEGORY | PLANNING INFORMATION
FREEDOM
CHOOSE UNIT
1
BOTTOM FREEZER – FULLY FLUSH COLLECTION
30"
36"
36"
T30IB800SP*
2-Door
Custom Unit
T36IB800SP
2-Door
Custom Unit
T36IT800NP
French Door
Custom Unit
TFL30IB800*
Flat
Stainless Steel
TFL36IB800
Flat
Stainless Steel
TFL36IT800
Flat
Stainless Steel
WINE PRESERVATION – FULLY FLUSH COLLECTION
18"
T18IW800SP
Reversible
Swing
Custom
Column
TFL18IW800
Flat
Stainless Steel
Reversible
Swing
CHOOSE PANEL
2
TCH30IB800*
Chiseled
Stainless Steel
TCH36IB800
Chiseled
Stainless Steel
TCH36IT800
Chiseled
Stainless Steel
TCH18IW800
Chiseled
Stainless Steel
Reversible
Swing
CHOOSE HANDLE
3
AND OPTIONAL FRAME
PR36HNDL10
36-Inch Professional Handle
Coordinates with Thermador
Professional
MS36HNDL10
36-Inch Masterpiece
Coordinates with Thermador
Masterpiece® Series appliances
* This appliance requires one
36-inch handle for the door and
one 30-inch handle for the
bottom freezer drawer.
PR30HNDL10
30-Inch Professional Handle
MS30HNDL10
30-Inch Masterpiece
®
Series appliances
®
Handle
®
Handle
WATERCUBES CRUSHEDAGITATION LOCKLIGHT
®
REFRIGERATION | PLANNING INFORMATION
24"
PRE-ASSEMBLED BOTTOM FREEZERS
30"
36"
36"
T24IW800SP
Reversible
Swing
Custom
Column
T30BB810SS
2-Door
Flat Stainless Steel Panels
Masterpiece
Removable Frame
T36BB810SS
2-Door
Flat Stainless Steel Panels
Masterpiece
Removable Frame
®
Handles
®
Handles
T36BT810NS
French Door
Flat Stainless Steel Panels
Masterpiece
Removable Frame
®
Handles
TFL24IW800
Flat
Stainless Steel
Right-Hand
Swing
T30BB820SS
2-Door
Flat Stainless Steel Panels
Professional Handles
Removable Frame
T36BB820SS
2-Door
Flat Stainless Steel Panels
Professional Handles
Removable Frame
T36BT820NS
French Door
Flat Stainless Steel Panels
Professional Handles
Removable Frame
TCH24IW800
Chiseled
Stainless Steel
Right-Hand
Swing
FRAMEKIT10
This accessory enables installation in
24-inch deep cutouts. Kit includes two
identical and reversible vertical frames.
A frame is attached to all pre-assembled
models. It is removable if a ush
installation in a 25" deep cabinet
is desired.
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
IMPORTANT: Use a sealing kit when connecting refrigerator and freezer columns side-by-side (included with every freezer column). Use HEATRKIT10 for all non-traditional side-by-side combinations,
installations where columns are not connected but less than six inches (152 mm) from one another and for any installation in areas subject to excessive humidity. See page 365 for details.
359
359
FREEDOM® COLLECTION
PLANNING CHECKLIST
This custom product requires attention to the nest details. Did you remember to…?
Choose a desired conguration – side-by-side or stand-
alone columns (See pages 367–371 for details)
Plan the cutout height(s) – 84" (See pages 367– 371 for details)
Plan the cutout width(s) – depends on conguration and
column width (See pages 367–371 for details)
Plan the cutout depth – 25" for North American style cabinets,
24" with installation frame accessory, 24" for European style
cabinets (See pages 367–371 for details)
Ensure the cutout interior (top and sides) is ush to the
appliance at a depth of min. 4", preferably 6" from face frame
(See pages 367–371 for details)
Ensure the cutout interior returns (top and sides) are nished
to match exterior at a depth of min. 4", preferably 6" from
face frame (See pages 367–371 for details)
Ensure proper clearance for appliance doors including
handle(s) – check for interference with other appliances,
open or closed cabinets and doors, nearby walls (See page
363 for details)
Properly site the electrical outlet and (if applicable) water box
(See page 366 for details)
Ensure the reverse of any custom panel is nished to match
the exterior
Choose the handle style – Professional (PR36HNDL10),
Masterpiece® (MS36HNDL10) or custom
Choose the correct handle length – normally PR36HNDL10
or MS36HNDL10 – shorter handle (PR30HNDL10 or
MS30HNDL10) for 30" bottom freezer (T30IB800SP)
drawer only
Choose the toekick style – stainless (included with appliance)
or design custom toekick(s) (See page 372 for details)
Procure the proper installation accessories – stainless steel
frame kit (FRAMEKIT10) for framed installations in 24-inch
deep cutouts, heater kit (HEATRKIT10) for installations where
two appliances are installed side-by-side or instances where
any appliances are installed less than 6" apart from another
but not connected. The heater kit is also recommended for
use with any installation in areas that are subject to humidity,
or located next to an outside wall. (See page 365 for details)
If applicable, procure the proper water lter accessories –
additional replacement lters (REPLFLTR10), lter by-pass
(SCRNFLTR10) for in-home water ltration system (See page
365 for details)
360
Choose the door panel type – at (TFL series) or chiseled
(TCH series) stainless steel accessory panels or design custom
panel(s) (See page 364 for details)
FREEDOM® COLLECTION
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
WATERCUBESCRUSHEDAGITATIONLOCKLIGHT
PLANNING CHECKLIST
The Thermador® Freedom® Collection uses independent columns that create unlimited exibility in both function and design. Some suggested
pairings are listed below. A special kit is included with all freezer columns to simplify traditional side-by-side refrigerator / freezer combinations.
When combining two appliances where one is not a freezer column or if any two units are installed less than 6" (152 mm) apart from one another
but not connected side-by-side, always use the Heater Kit (HEATRKIT10) to guard against damaging condensation build-up.
42-INCH
CATEGORY | PLANNING INFORMATION
FREEDOM
®
REFRIGERATION | PLANNING INFORMATION
18-Inch
Freezer
Column
T18IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
WATERCUBES CRUSHEDAGITATION LOCK LIGHT
18-Inch
Freezer
Column
T18ID800LP
24-Inch
Fresh Food
Column
T24IR800SP
18-Inch
Freezer Column
T18IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
18-Inch
Freezer Column
WATERCUBES CRUSHEDAGITATION LOCK LIGHT
T18ID800LP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
48-INCH
18-Inch
Freezer
Column
T18IF800SP
30-Inch
Fresh Food
Column
T30IR800SP
24-Inch
Freezer Column
T24IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
18-Inch
Freezer
WATERCUBES CRUSHEDAGITATION LOCK LIGHT
Column
T18ID800LP
30-Inch
Fresh Food
Column
T30IR800SP
24-Inch
Freezer Column
WATERCUBES CRUSHEDAGITATION LOCK LIGHT
T24ID800SP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
24-Inch
Freezer
Column
T24IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
18-Inch*
Wine
Preservation
Column
T18IW800SP
24-Inch
Freezer
Column
WATERCUBES CRUSHEDAGITATION LOCK LIGHT
T24ID800LP
24-Inch
Fresh Food
Column
T24IR800SP
54-INCH
24-Inch
Freezer
Column
T24IF800SP
WATERCUBES CRUSHEDAGITATION LOCK LIGHT
30-Inch
Fresh Food
Column
T30IR800SP
24-Inch
Freezer
Column
T24ID800LP
30-Inch
Fresh Food
Column
T30IR800SP
36-Inch*
2-Door
Bottom Freezer
T36IB800SP
18-Inch*
Wine
Preservation
Column
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
24-Inch*
Wine
Preservation Column
T24IW800SP
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
T18IW800SP
60-INCH
30-Inch
Freezer
Column
T30IF800SP
30-Inch
Fresh Food
Column
T30IR800SP
36-Inch*
2-Door
Bottom Freezer
T36IB800SP
24-Inch*
Wine
Preservation
Column
T24IW800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
*Requires Heater Kit HEATRKIT10
361
361
FREEDOM® COLLECTION
PLANNING INFORMATION
INSTALLATION CONSIDERATIONS
LOCATION
The appliance should be installed in a dry, ventilated room. It may not
be installed outdoors. The ambient temperature of the room must be
between 55°F (13°C) and 100°F (43°C).
The appliance should not be exposed to constant direct sunlight or
excessive heat. If installation next to a heat source, such as an oven,
radiator, etc. is unavoidable, use a suitable insulating plate or observe
the following minimum distances from the heat source:
1
– 1
/4" (30 mm) from an electric cooking appliance,
– 11 13/16" (300 mm) from an oil or solid-fuel cooking appliance.
INSTALLATION AND CUTOUT DIMENSIONS
Please see pages 367–371 for complete cutout planning information.
It is important to observe the specied dimensions of the installation
cutout for a trouble-free installation of the appliance and for the
subsequent appearance of the door panel.
– In particular ensure that the cutout is square. Squareness can be
checked by suitable means, e.g. spirit level, diagonal measurements,
etc.
– The side walls of the cutout must be ush. The minimum thickness
of the side and top walls is
toekick panel is 1/4" (6 mm).
5
/8" (16 mm). The minimum thickness of
FURNITURE / FIXTURES
During installation, the appliance is fastened to adjacent and
overhead furniture / xtures and it is therefore essential that all such
furniture / xtures are well secured to the substructure or adjacent
wall.
FLOORING / SUBSTRUCTURE
On account of the heavy weight of a fully loaded appliance, a loadbearing substructure is required. To ensure correct installation and
function, the support must be at, level and made of hard, rigid
material. If in doubt, contact an architect or a building expert.
Refer to the following table for load-bearing capacity:
APPLIANCELOAD BEARING CAPACITY
24-Inch Fresh Food Column890 lbs. / 400 kg
30-Inch Fresh Food Column1,110 lbs. / 500 kg
18-Inch Freezer Column560 lbs. / 250 kg*
24-Inch Freezer Column780 lbs. / 350 kg*
30-Inch Freezer Column950 lbs. / 425 kg
30-Inch Bottom Freezer900 lbs. / 410 kg
36-Inch Bottom Freezer1,200 lbs. / 540 kg
*Without water dispenser
362
FREEDOM® COLLECTION
INSTALLATION OPTIONS
The Freedom® Collection offers a variety of installation possibilities*. In some instances, special accessories are required.
RECOMMENDED INSTALLATIONSCONSIDERATIONS
FREEDOM
®
REFRIGERATION | PLANNING INFORMATION
STANDALONE
SIDE-BYSIDE
SPLIT
COLUMNS
WITH
PARTITION
Any Freedom appliance can be installed as a stand-alone unit. Ensure
a cutout ush to the appliance at a depth of minimum 4" (102 mm),
preferably 6" (152 mm) on the top and sides.
When two appliances are installed side-by-side a sealing kit must be
used. For combinations that involve a freezer column, this kit is provided.
For all other (non-traditional) side-by-side combinations or instances where
any appliances are installed less than 6" (152 mm) apart from one another
but not connected side-by-side, purchase the Heater Kit (HEATRKIT10).
When dimensioning the partition, note the thickness of the door panel
(including handles) as well as the swivel range to prevent damage if the
doors are opened at the same time. (See page 247 for details on door
swivel range dimensions)
Three appliances can be installed together only if a partition— minimum
5
/8" (16 mm)—is placed between two of the appliances. Ensure that
door panel thickness (including handles) as well as the swivel range are
accounted for.
AT THE
END OF A
CABINETRY
RUN
NOT RECOMMENDEDCONCERNS
*The Thermador warranty shall apply only to recommended installations.
All Freedom appliances must be completely enclosed on the top and
sides. If one side of the appliance is visible, a decorative side panel must
be used. The side panel must be connected rmly to the wall, the oor
and any overhead furniture / xtures before the appliance is placed in the
cutout.
It is absolutely essential to ensure that the appliance is installed in such a
way that the doors do not interfere with an adjacent wall or other kitchen
elements. (See page 247 for details on door swivel range dimensions)
A partition—minimum 5/8" (16 mm)—is required to ensure the doors do
not interfere with one another when opened. Use a partition to separate
appliances and observe the door swivel range. (See page 247 for details
on door swivel range dimensions)
A Thermador French Door Bottom Freezer cannot be connected side-byside with any other appliance. Use a partition to separate appliances and
observe the door swivel range. (See page 247 for details on door swivel
range dimensions)
1.800.735.4328 | THERMADOR.COM
363
FREEDOM® COLLECTION
DOOR PANEL DIMENSIONS
Each Freedom® Collection refrigeration appliance is designed to be equipped with a decorative door panel. A panel can be custom-made or
purchased as a stainless steel accessory. The table below illustrates the dimensions of the stainless steel panel accessories and can be used as a
guide in creating custom panels. At 79 7/8" (2029 mm) tall, they are designed for a toekick height of 4" (102 mm), and a total cutout height of 84"
(2134 mm) yielding 1/8" (3 mm) reveals. At 3/4" (19 mm) deep, they are designed to attach to the 24" (610 mm) deep appliance for an overall depth
of 24 3/4" (629 mm). See page 368 for cutout planning.
When using custom panels, always ensure that the panel reverse is nished to match the exterior, as parts of the panel reverse will be visible when
the refrigerator door is opened.
IMPORTANT: While these sketches can serve as a general guide in planning panel dimensions, the correct panel dimensions are dictated by design
choices including style and dimensions of surrounding kitchen cabinetry, case and toekick height, etc. Please ensure careful planning based on the
specic kitchen design.
SINGLE DOORDISPENSERBOTTOM FREEZER
PRESERVATION
WWWW
V
U
P
WINE
M
H
H
N
R
HH
F
Drawer or Door
S
L
17 3/4"
23 3/4"
29 3/4"
17 3/4"
23 3/4"
29 3/4"
35 3/4"
35 3/4"
17 3/4"
23 3/4"
Q
Note #1Note #2
17 3/4"
(451 mm)
51 11/32"
(1304 mm)
51 11/32"
(1304 mm)
51 11/32"
(1304 mm)
9 1/16"
(230.5 mm)
9 1/16"
(230.5 mm)
28 13/32"
(722 mm)———————
28 13/32"
(722 mm)———————
28 13/32"
(722 mm)———————
14 1/2"
(368.3 mm)
14 1/2"
(368.3 mm)
32 11/16"
(830.5 mm)
32 11/16"
(830.5 mm)
4 11/32"
(110 mm)———
7 11/32"
(186 mm)———
1
/2" (64 mm) and 3 3/4" (95 mm).
10 1/8"
(257 mm)
10 1/8"
(257 mm)
10 1/8"
257 mm)
10 1/8"
(257 mm)
(95 mm)
(95 mm)
4" (102mm)
MODELDESCRIPTIONHWVRFMNPQULS
7
T18IF800SP
T24IR800SP
T24IF800SP
T30IR800SP
T30IF800SP
T18ID800RP
T18ID800LP
T24ID800RP
T24ID800LP
T30IB800SP
T36IB800SP
T36IT800NP
T18IW800SP
T24IW800SP
NOTE #1: The cutout for the dispenser unit must be horizontally and vertically centered in the panel.
NOTE #2: For custom wine preservation column door panels, the width of the two lateral anges of the frame may vary between 2
18-Inch
Freezer Column
24-Inch Freezer /
Fresh Food Columns
30-Inch Freezer /
Fresh Food Columns
18-Inch Ice & Water
Dispenser Columns
24-Inch Ice & Water
Dispenser Columns
30-Inch Two-Door
Bottom Freezer
36-Inch Two-Door
Bottom Freezer
36-Inch French Door
Bottom Freezer
18-Inch Wine
Preservation Column
24-Inch Wine
Preservation Column
/8"
79
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
(451 mm)——————————
(603 mm)——————————
(756 mm)——————————
(451 mm)———
(603 mm)———
(756 mm)—
908 mm)—
(908 mm)
(451 mm)———————
(603 mm)———————
3 3/4"
3 3/4"
MAX.
PANEL
WEIGHT
37 lbs.
(17kg)
50 lbs.
(23kg)
64 lbs.
(29kg)
37 lbs.
(17kg)
50 lbs.
(23kg)
55 lbs.
(25kg)
55 lbs.
(25kg)
55 lbs.
(25kg)
37 lbs.
(17kg)
50 lbs.
(23kg)
364
FLAT STAINLESS STEEL DOOR PANELS
FREEDOM® COLLECTION
OPTIONAL ACCESSORIES
FREEDOM
®
REFRIGERATION | PLANNING INFORMATION
FRESH FOOD
TFL24IR800 24-Inch
TFL30IR800 30-Inch
FREEZER
TFL18ID800 18-Inch with Dispenser
TFL18IR800 18-Inch without Dispenser
TFL24ID800 24-Inch with Dispenser
TFL24IR800 24-Inch without Dispenser
TFL30IR800 30-Inch without Dispenser
CHISELED STAINLESS STEEL DOOR PANELS
FRESH FOOD
TCH24IR800 24-Inch
TCH30IR800 30-Inch
FREEZER
TCH18ID800 18-Inch with Dispenser
TCH18IR800 18-Inch without Dispenser
TCH24ID800 24-Inch with Dispenser
TCH24IR800 24-Inch without Dispenser
TCH30IR800 30-Inch without Dispenser
INSTALLATION ACCESSORIES
BOTTOM FREEZER
TFL30IB800 30-Inch 2-Door
TFL36IB800 36-Inch 2-Door
TFL36IT800 36-Inch French Door
WINE PRESERVATION
TFL18IW800 18-Inch
TFL24IW800 24-Inch
BOTTOM FREEZER
TCH30IB800 30-Inch 2-Door
TCH36IB800 36-Inch 2-Door
TCH36IT800 36-Inch French Door
WINE PRESERVATION
TCH18IW800 18-Inch
TCH24IW800 24-Inch
FRAMEKIT10 FREEDOM® FRAME KIT
Included with all pre-assembled bottom freezers, this adjustable frame is also available as an optional accessory for
use with any custom column for installation in 24-inch (610 mm) deep cutouts. The kit includes two identical and
reversible metal side trims whose placement between the interior cutout wall and the appliance helps overcome the
challenge of unnished cabinet returns.
HEATRKIT10 FREEDOM® HEATER KIT
When two appliances are installed side-by-side a sealing kit must be used. For combinations that involve a freezer
column, this kit is provided. For all other (non-traditional, i.e. two wine columns, two bottom freezers, etc.) side-byside combinations or instances where any appliances are installed less than 6" (152 mm) apart from one another but
not connected side-by-side, purchase this kit. This kit is also recommended for use with any installation in areas that
are subject to extreme humidity.
FILTER ACCESSORIES
REPLFLTR10 WATER FILTER
Replacement water lter for use in all freezer and
bottom freezer models.
SCRNFLTR10 FILTER BY-PASS
Filter by-pass for use with existing in-home water
ltration systems. For all freezer and bottom freezer
models.
HANDLES
PR36HNDL10 36-INCH PROFESSIONAL
PR30HNDL10* 30-INCH PROFESSIONAL
Coordinates with Thermador Professional® Series appliances.
Coordinates with Thermador Masterpiece® Series appliances.
NOTE: Choose one handle for each column, choose 2 handles for each 2-door
bottom freezer and choose 3 handles for each French Door bottom freezer.
*For use with T30IB800SP bottom freezer drawer only.
WATERCUBES CRUSHEDAGITATIONLOCK LIGHT
Heater Kit Required
1.800.735.4328 | THERMADOR.COM
®
365
FREEDOM® COLLECTION
PLANNING INFORMATION
ELECTRICAL SPECIFICATIONS
The appliance comes with a 3-wire power supply cord. UL listed in
the USA.
The appliance requires a 3-wire receptacle that is tted with a 15 Amp
fuse or higher. Refer to the following table for max load details.
APPLIANCEMAX LOAD
120V AC, 60Hz
24-Inch Fresh Food Column15 A
30-Inch Fresh Food Column15 A
18-Inch Freezer Column*15 A
24-Inch Freezer Column*15 A
30-Inch Freezer Column*15 A
30-Inch 2-Door Bottom Freezer*15 A
36-Inch 2-Door Bottom Freezer*15 A
36-Inch French Door Bottom Freezer*15 A
18-Inch Wine Preservation Column15 A
24-Inch Wine Preservation Column15 A
*Including ice maker
The receptacle must be installed by a licensed electrician only.
For the installation position of the receptacle refer to diagram in
“Electrical Location”.
GROUNDING INSTRUCTION
This appliance must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for the electric current.
ADDITIONAL GROUNDING PROCEDURE
Some local regulations may require a separate ground. In such
cases, the required accessory ground wire, clamp and screw must
be purchased separately. Never ground the appliance to plastic
plumbing lines, gas lines or water pipes.
ELECTRICAL LOCATION
SPLIT COLUMN INSTALLATION
18-Inch24-Inch30-Inch
X18" (457 mm)24" (610 mm)30" (762 mm)
Y9" (229 mm)12" (305 mm)15" (381 mm)
SIDE-BY-SIDE INSTALLATION
WATER LOCATION
A cold water connection is required for appliances that feature an ice
maker or an ice and water dispenser.
The water pressure must be between 40 and 120 p.s.i. (2.75-8.25 bar).
The installation must comply with local plumbing regulations.
A separate shut-off valve must be installed for the appliance water
connection.
The shut-off valve for the water connection may not be behind the
appliance. It is recommended to place the shut-off valve outside
the cutout next to the appliance or in another easily accessible
location. When installing the water connection, observe the permitted
installation areas for the water supply line. The supply line can be
located to the right (a), to the left (b), or underneath (c).
A 4-conductor cord shall be used when the appliance is installed in an
area where local codes do not permit grounding through the neutral.
Power supply cord must be replaced by a licensed electrician only.
WARNING
Improper connection of the equipment grounding conductor may
result in electric shock. Have the appliance checked by a qualied
electrician or service technician if you are in doubt as to whether the
appliance has been properly grounded.
366
CABINETRY TERMS & BASIC REQUIREMENTS
FREEDOM REFRIGERATION
Cutout depth
Cutout depth
Cutout depth
Cutout depth
Cutout depth
To clarify the terms that are used in this design guide, please refer to
the following denitions:
CASE
This is the main body of a kitchen cabinet.
(CABINET) FACE FRAME
This is a decorative frame at the front of a kitchen cabinet
representing the space between cabinetry doors or drawers and
is typical for North America. European style cabinets (frameless
cabinetry) typically do not have a face frame.
DOOR PANEL
Able to be fully ush integrated when installed in 25" (635 mm) deep
cabinets, Freedom® Collection refrigerators are intentionally designed
to be equipped with custom door panels that perfectly match
surrounding kitchen cabinetry. Typical panel thickness is 3/4" (19 mm).
However, thicker panels can be accommodated to emulate the look
of the visible face frame (as in overlay) or to match existing kitchen
cabinetry doors. When using custom panels, always ensure that the
panel reverse is nished to match the exterior, as parts of the panel
reverse will be visible when the refrigerator door is opened.
FREEDOM® COLLECTION
PLANNING INFORMATION
CUTOUT (NICHE)
The cutout is the cavity in which a Freedom® Collection appliance
is installed. The width of the cutout (18-inch, 24-inch, 30-inch, etc.)
is dependent on the appliance(s). The total depth of the cutout is
equal to the depth of the case plus face frame. It does not necessarily
include the thickness of the door panel. For proper planning of cutout
depth, please refer to pages 367–371.
®
Typically, the cutout for a Freedom
(635 mm) deep. When planning the cutout, it is essential that the top
and side interior walls be ush to the appliance at a minimum depth
of 4" (102 mm) from the outer edge of the face frame and composed
of thick (5/8" (16 mm) minimum) material for secure installation. Also,
because the case interior will be partially visible when the refrigerator
door is opened, always ensure that the top and side returns are
nished to match the exterior furniture at the same minimum depth
of 4" (102 mm).
Collection appliance will be 25"
CATEGORY | PLANNING INFORMATION
FREEDOM
®
REFRIGERATION | PLANNING INFORMATION
KITCHEN CABINETRY ILLUSTRATION
Face Frame Cabinet
(North American Style)
24”
Appliance
Door Panel
25”
Full Overla
24”
Appliance
Case
Face
Frame
Standard Overlay
Frameless Cabinet
(European Style)
Case
y
25”
OffsetFlush Inset
24”
Appliance
25”
24”
Appliance
25”
Door Panel
24”
Appliance
24”
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
367
367
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
CABINETRY STYLE & CUTOUT DEPTH
Freedom® Collection refrigeration appliances are designed to
accommodate nearly any type of kitchen cabinetry door installation.
Generally, when using standard ¾" (19 mm) panels, 25" (635 mm)
deep cutouts are recommended but the required cutout depth
depends on the desired cabinetry and custom panel execution,
whether typical North American styles that employ a face frame—
requiring a depth of 25" (635 mm)— or European style —requiring a
depth of 24" (610 mm).
The below cabinetry styles detail requirements for the cutout and
custom panel.
A) STANDARD (PARTIAL) OVERLAY – 25" (635 MM)
CUTOUT DEPTH
With standard overlay kitchen cabinetry the face frame is an important
design element. In order to emulate this aesthetic for the refrigerator,
one must account for the door panel thickness (typically 3/4" (19
mm)) as well as the face frame thickness (here, also 3/4" (19 mm)).
The resulting thickness of the custom door panel is therefore 3/4" (19
mm) + 3/4" (19 mm) = 1 1/2" (38 mm). The cumulative thickness of the
custom door panel requires added depth in the cutout so 25" (635
mm) is recommended (see sketch).
B) FULL OVERLAY – 25" (635 MM) CUTOUT DEPTH
The requirements for standard overlays are also valid for full overlay
designs so 25" (635 mm) cutout depth is recommended. However,
especially if kitchen cabinet doors are thinner than 3/4" (19 mm) or
reveals are 1/8" (3 mm) or smaller, a 24" (610 mm) cutout depth may
also be acceptable. In this execution both the cabinet door and the
small reveal of the fully overlaid face frame must be emulated within
the typical appliance door panel thickness of 3/4" (19 mm). This can
be done either a) by simply ignoring the visible area of the face frame
(very small reveals show virtually no face frame) or b) by creating
a “nose” on the custom door panel to emulate a small visible face
frame (see sketch).
Here, kitchen cabinetry door panels do not rest atop the cabinet
face frame (overlay), but are instead inserted partially (offset) or fully
ush (inset) into the face frame. Such offset or ush inset door panels
require additional depth in the cutout. Using the example of a 3/4" (19
mm) thick panel, the complete cutout depth would be 24" (610 mm)
+ 3/4" (19 mm) = 24 3/4" (629 mm) and in this example 25" (635 mm)
is recommended.
E) FRAMED – 24" (610 MM) CUTOUT DEPTH
For Freedom® Collection refrigeration appliances, a metal frame
(FRAMEKIT10) may be afxed to the side of the cabinet which
conveniently hides unnished case returns and provides a classic
built-in look. This is particularly relevant for existing cabinetry that has
not been custom-built to accommodate these appliances. A 24" (610
mm) cutout will result in a slightly protruding door panel for a typical
built-in look.
If the kitchen design is based on European style cabinetry, there is
no need to emulate the look of a face frame, as such a frame is not
an element of the kitchen cabinetry design. Therefore a 24" (610
mm) deep cutout with accompanying custom panel will always be
sufcient.
A) STANDARD OVERLAY DESIGN
Custom Door Panel (Emulating a Face Frame)
B) FULL OVERLAY DESIGN
Custom Door Panel with Nose (Emulating a
Face Frame)
SPLIT COLUMN INSTALLATION
A: Area for running
the water line. It is
recommended the
water-box be placed
adjacent to the
installation cutout,
so that it can be
accessed for service
without uninstalling
the appliance. If
this is not possible,
place the recessed
water box adjacent
to the power supply
socket elevated
at the heights as
referenced in areas
A+B.
B: Area for installing the
power connection
D: Opening depth of
cutout, depending
on kitchen design
(24" minimum)
XY
18-Inch Columns18" (457 mm)9" (229 mm)
24-Inch Columns24" (610 mm)12" (305 mm)
30-Inch Columns30" (762 mm)15" (381 mm)
30-Inch Bottom Freezer30" (762 mm)15" (381 mm)
36-Inch Bottom Freezer36" (914 mm)18" (457 mm)
IMPORTANT
It is strongly recommended the top interior of the cutout be of
solid material (5/8" (16 mm) thickness). Ensure that the top well is
completely ush for a depth of at least 4" (102 mm).
Ensure that the side walls of the cutout are also completely ush to a
depth of at least 4" (102 mm).
368
If, for some reason, a separate cutout cabinet is created, ensure
that the furniture return is at least 4" (102 mm) deep for proper
installation.
PLANNING EXAMPLE #1: FRAMELESS (EUROPEAN) CABINETRY
Upper Molding
Kitchen
Cabinet
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
CATEGORY | INSTALLATION
FREEDOM
®
REFRIGERATION | INSTALLATION
Kitchen Cabinetry
Door Panel
Min. 4"
(102 mm)
Installation Cutout
Upper
Molding
Custom
Door Panel
Kitchen
Cabinet
Room Floor
Toekick
Room Wall
Countertop
CUTOUT FOR 30" APPLIANCE, FRAMELESS CABINETRY:
In this example, the installation cutout is formed by simply leaving a
gap between two kitchen cabinets.
The custom door panel 3/4" (19 mm) will be identical in appearance
and thickness to the surrounding kitchen cabinetry panels.
– cutout width is exactly 30" (762 mm)
– cutout (case) depth is 24" (610 mm) — does not include door panel
– top and side walls of cutout interior are completely ush, of solid
material and at least 4" (102 mm) deep
Side Walls of Installation Cutout are Flush to Appliance
INSTALLATION CUTOUT
(VERTICAL SECTION)
30-INCH INSTALLATION CUTOUT (HORIZONTAL SECTION)
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
369
369
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
SIDE-BY-SIDE INSTALLATION
The cutout width for side-by-side installations is dened by adding together the dimensions of two single columns. Below are the dimensions of a
classic 48" side-by-side, with an 18" freezer on the left and a 30" refrigerator on the right.
IMPORTANT: Just as with standalone columns, always ensure that
the receptacles and the water line are
correctly positioned. For dimensional
requirements see page 366.
48" SxS
(18" freezer + 30" refrigerator)
A: Area for running the water line. It is recommended the water-box be placed adjacent
to the installation cutout, so that it can be accessed for service without uninstalling
the appliance. If this is not possible, place the recessed water box adjacent to the
power supply socket elevated at the heights as referenced in areas A+B.
B: Area for installing the power connection
D: Opening depth of cutout, depending on kitchen design (24" minimum)
370
PLANNING EXAMPLE #2: STANDARD OVERLAY CABINETRY
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
CATEGORY | INSTALLATION
FREEDOM
®
REFRIGERATION | INSTALLATION
Kitchen
Cabinet
Custom
Door Panel (3/4")
Kitchen Cabinetry
Face Frame (Visible)
Furniture Return
Cutout Cabinet
Installation Cutout,
(Created by a Separate Cutout)
CUTOUT FOR 42" SIDE-BY-SIDE APPLIANCE COMBINATION,
STANDARD OVERLAY CABINETRY:
In this example, the installation cutout is formed by creating a separate cutout
Min. 4"
(102 mm)
around the appliances. It yields a look that deviates from the general kitchen design.
The custom door panel has a cumulative thickness of 1 1/2" (38 mm), 3/4"
(19 mm) emulating the face frame and 3/4" (19 mm) for the actual door panel). Thus,
a 25" (635 mm) deep installation cutout is required.
Countertop
– cutout width is exactly 42" (for an 18" + 24" = 42" side-by-side combination)
– cutout (case) depth is 25" (635 mm) due to 1 1/2" (38 mm) custom door panel
– any furniture return must be at least 4" (102 mm) deep, on interior top and sides,
of solid material and should be nished to match the exterior at the same depth
(4" or 102 mm)
Min. 4"
(102 mm)
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
371
371
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
TOEKICK & VENTING GRILLE
Each Freedom® Collection refrigeration appliance comes with a 4" (102 mm) tall stainless steel toekick. A custom-made toekick that matches the
surrounding cabinetry may be applied instead. While standard toekick height is 4" (102 mm), depending on the usage of the leveling legs, the
toekick height could vary. Regardless of toekick height, it is imperative that the venting grille remain unblocked to ensure proper functionality of
the appliance. Decorative toekicks should be removable to allow for servicing.
Door Panel
Toekick
Typical 4" (102 mm) toekick height. Velcro adhesive strips are used to
fasten the toekick to the appliance. Venting grille and (if applicable)
the water lter cavity are located above the toekick area.
UPPER MOLDING
The planning of decorative upper molding above the cutout requires
taking into account the actual or desired height of the door panel.
The overall height of the door panel will depend on:
– the height of the appliance, typically 84" (2134 mm) — leveling legs
allow height adjustment ranging from -1/2" (-13 mm) to +1 3/8"
(+35 mm)
– the installed height of the door panel (distance from the bottom
edge of the door panel to the oor, typically 4" (102 mm), and,
if desired, any extension of the custom panel above the appliance
cutout)
– the appliance type (single door or bottom freezer)
IMPORTANT
Please recall that a panel should be installed at a minimum height
of 4" (102 mm) from the oor to allow proper ventilation of the
appliance.
Always ensure that the top of the cutout or upper decorative
molding is at least 4" (102 mm) deep, so that the refrigerator can be
properly secured to the cutout wall. This is particularly important if
a protruding cutout is specially created and congured with a face
frame. Furniture returns for any face frame must be a minimum of
4" (102 mm) deep.
If required by the surrounding cabinetry design, the distance
between the bottom edge of the door panel and the oor can be
increased from approx. 4" (102 mm) up to 7 1/8" (181 mm), but
should not be decreased. Note, however, that the venting grille
and (if applicable) water lter cavity will be visible, even if the
door is closed.
VERTICAL SECTION, SIDE VIEW:
Possible Extension
of the Door Panel
Decorative
Molding
Standard
Door Panel
Appliance Door
Appliance
*Adjustment in leveling legs: -1/2" (-13 mm) to 1 3/8" (35 mm)
372
PROFESSIONAL HANDLE TOP VIEW
PROFESSIONAL HANDLE FRONTAL VIEW
MASTERPIECE HANDLE TOP VIEW
PROFESSIONAL HANDLE TOP VIEW
PROFESSIONAL HANDLE FRONTAL VIEW
PROFESSIONAL HANDLE TOP VIEW
PROFESSIONAL HANDLE FRONTAL VIEW
(39 mm)
23/16"
23/16"
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
DOOR SWIVEL RANGE
It is absolutely essential to ensure that the appliance is installed in such a way that the doors (including handles) and adjacent cabinets, countertops,
pilasters, walls or other kitchen elements do not interfere with one another when opened. The illustrations below depict the swivel range of the
Freedom® Collection refrigerator doors including mounted door panels of both 3/4" (19 mm) and 1 1/2" (38 mm) thickness.
In the event of door interference the following solutions may be employed:
– Limit the refrigerator door opening angle to 90° with a door stop pin inserted into the hinge.
– Reduce the door panel thickness (if larger than 3/4" (19 mm)).
– Install a spacer between the appliance and the kitchen element that creates the interference.
– Rearrange the opposing kitchen element that creates the problem.
– Create a protruding cutout for the appliance.
CATEGORY | INSTALLATION
FREEDOM
®
REFRIGERATION | INSTALLATION
3
DOOR SWIVEL RANGE –
/4" (19 MM)
FLUSH APPLIANCE DOOR PANEL
HANDLE INSTALLATION AND DIMENSIONS
PROFESSIONAL HANDLE
TOP-VIEW DOORS
DOOR SWIVEL RANGE – 1
1
/2" (38 MM)
FLUSH APPLIANCE DOOR PANEL
®
MASTERPIECE
HANDLE
TOP-VIEW DOORS
PR36HNDL10PR30HNDL10*MS36HNDL10MS30HNDL10*
3
/8"
1
(39 mm)
*For use with 30" bottom freezer T30IB800SP drawer only
303/8"
(771,2 mm)
1
31
/16"
(829 mm)
SIDE-VIEW DRAWERSIDE-VIEW DRAWER
5
2
/8"
(66 mm)
243/8"
(618,8 mm)
3
/8"
1
5
/8"
26
(677 mm)
(66 mm)
25/8"
1
1
/4"
(31 mm)
303/8"
(771,2 mm)
1
33
/4"
(843 mm)
(55 mm)
1
/4"
1
(31 mm)
243/8"
(618,8 mm)
3
27
/16"
(690,8 mm)
(55 mm)
1.800.735.4328 | THERMADOR.COM
1.800.735.4328 | THERMADOR.COM
373
373
FREEDOM® COLLECTION
*
*
Furniture return
INSTALLATION
24-INCH CUSTOM FRESH FOOD COLUMN
CUTOUT DIMENSIONS
A: Area for installation of power connection.
B: Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus the
thickness of the door panel. Panel dimensions based on a
standard
dimensions may vary depending on kitchen reveals and toe kick.
Stainless Steel models contain a panel-ready base unit,
ready-to-install Stainless Steel door(s) with a right or
left door swing and handle(s).
1
/8" inch reveal and 4 inch toe kick. Custom panel
TOP VIEW CLEARANCE
PANEL DIMENSIONS
*
374
*Excludes thickness of door panel. If standard panel
with 3/4" thickness is mounted, total depth is 24 3/4".
*
30-INCH CUSTOM FRESH FOOD COLUMN
*
*
CUTOUT DIMENSIONS
A: Area for installation of power connection.
B: Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus the
thickness of the door panel. Panel dimensions based on a
standard
dimensions may vary depending on kitchen reveals and toe kick.
Stainless Steel models contain a panel-ready base unit,
ready-to-install Stainless Steel door(s) with a right or
left door swing and handle(s).
1
/8" inch reveal and 4 inch toe kick. Custom panel
FREEDOM® COLLECTION
INSTALLATION
FREEDOM
®
REFRIGERATION – FRESH FOOD | INSTALLATION
TOP VIEW CLEARANCE
PANEL DIMENSIONS
*
1.800.735.4328 | THERMADOR.COM
*Excludes thickness of door panel. If standard panel
with 3/4" thickness is mounted, total depth is 24 3/4".
*Excludes thickness of door panel. If standard panel
with 3/4" thickness is mounted, total depth is 24 3/4".
11
/16"
32
(830.5 mm)
1
/2"
14
(368 mm)
11
32
/16"
(830.5 mm)
4" (102 mm)
4" (102 mm)
7
(186 mm)
7
79
/8"
(2029 mm)
variable waterconnection
at the appliance
11
/32"
*
*
24-INCH CUSTOM FREEZER COLUMN
T24IF800SP
CUTOUT DIMENSIONS
FREEDOM® COLLECTION
INSTALLATION
FREEDOM
®
REFRIGERATION – FREEZER COLUMNS | INSTALLATION
TOP VIEW CLEARANCE
PANEL DIMENSIONS
*
1.800.735.4328 | THERMADOR.COM
*
*Excludes thickness of door panel. If standard panel
with 3/4" thickness is mounted, total depth is 24 3/4".
379
FREEDOM® COLLECTION
*Excludes thickness of door panel. If standard panel
*
*
INSTALLATION
30-INCH CUSTOM FREEZER COLUMN
T30IF800SP
CUTOUT DIMENSIONS
TOP VIEW CLEARANCE
PANEL DIMENSIONS
*
380
*
with 3/4" thickness is mounted, total depth is 24 3/4".
30-INCH CUSTOM 2-DOOR BOTTOM FREEZER
*
*Excludes thickness of door panel. If standard panel
*
*
T30IB800SP
CUTOUT DIMENSIONS
A: Area for installation of power connection.
B: Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus the
thickness of the door panel. Panel dimensions based on a
standard
dimensions may vary depending on kitchen reveals and toe kick.
Stainless Steel models contain a panel-ready base unit,
ready-to-install Stainless Steel door(s) with a right or
left door swing and handle(s).
†Excludes thickness of door panel. If standard panel
†
with 3/4" thickness is mounted, total depth is 24 3/4".
CATEGORY
INSTALLATION
FREEDOM
®
REFRIGERATION | INSTALLATION
MODELS SHOWN: T24IW800SP 24-INCH WINE PRESERVATION COLUMNS WITH TFL24IW800 FLAT STAINLESS STEEL PANELS AND
PROFESSIONAL HANDLES
1.800.735.4328 | THERMADOR.COM
389
EXPERIENCE
®
THERMADOR
Thermador is committed to giving you an enjoyable, creative and
rewarding cooking experience. Whether you would like to research our
products, watch a video of our chef searing the perfect scallop, or have
questions on the use and care of your product, simply browse our online
resource library at thermador.com.
CONNECT WITH US
B
thermador.com/blog
pinterest.com/thermador
instagram.com/thermadorhome
facebook.com
youtube.com/thermadorhome
twitter.com/thermador
VISIT THE ABOVE SITES TO SHARE
PHOTOS OF YOUR NEW KITCHEN
AND CREATIVE DISHES.
TAKE US WITH YOU
™
Visit the App Store
download our Innovations app, including
the Thermador Kitchen Ideas & Lookbook
and the Thermador Kitchen Design and
Planning Guide.
CUSTOMER SERVICE
For dedicated customer service on
any Thermador product, please call:
1-800-735-4328 or contact us at
thermador.com
or Google Play™ to
432App Store is a trademark of Apple Inc.; Google Play is a trademark of Google Inc.
PRODUCT
WARRANTY
PROFESSIONAL RANGES
Limited warranty, entire appliance, parts and labor (2 year)
PROFESSIONAL RANGETOPS
Limited warranty, entire appliance, parts and labor (2 year)
BUILT-IN OVENS
Limited warranty parts and labor (2 year)
INDUCTION COOKTOPS
Limited warranty, entire appliance, parts and labor (2 year)
Limited warranty for glass ceramic surface/electronic
elements and switches; parts only (3rd to 5th year)
GAS COOKTOPS
Limited warranty, entire appliance, parts and labor (2 year)
ELECTRIC COOKTOPS
Limited warranty, entire appliance, parts and labor (2 year)
Limited warranty for glass ceramic surface/electronic
elements and switches; parts only (3rd to 5th year)
VENTILATION
Limited warranty, entire appliance, parts and labor (2 year)
WARMING DRAWERS
Limited warranty, entire appliance, parts and labor (2 year)
BUILT-IN MICROWAVES
Limited warranty, entire appliance, parts and labor (2 year)
REFRIGERATION
Limited two-year warranty, entire appliance, parts and labor
on any part of the refrigerator that fails because of a
manufacturing defect
Limited warranty for sealed refrigeration system*; parts and
labor (3rd to 6th year)
Limited warranty for sealed refrigeration system*; parts only
(7th to 12th year)
* Sealed refrigeration system includes compressor, evaporator, condenser,
dryer/ strainer and connection tubing
DISHWASHERS
Full warranty, entire appliance, parts and labor (2 year)
Limited warranty for microprocessor or printed circuit board;
parts only (3rd to 5th year)
Limited warranty for racks (does not include rack components);
parts only (3rd to 5th year)
Limited warranty for rust-through on inner tub liner; parts only
(Lifetime)
BUILT-IN COFFEE MACHINES
Limited warranty, entire appliance, parts and labor (2 year)
These warranties give you specic legal rights and you may have other rights that vary from state to state. Limited Warranty from Date of Purchase. For complete warranty details, refer to your
Use & Care manual, or ask your dealer.
Specications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specic ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador® indicating the model
number. Specications are correct at time of printing. Thermador reserves the right to change product specications or design without notice. Some models are certied for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.