Congratulations on your recent THERMADOR® purchase! Whether you are a dedicated chef or simply a connoisseur of the
art of cooking, owning a THERMADOR kitchen is the ultimate expression of personal style, good taste and an appreciation
for the complete culinary experience. Our award-winning products have been empowering culinary enthusiasts for more
than eleven decades.
Before you begin using your new THERMADOR product, please take a moment to review the Use and Care Guide. You
will find the answers to all of your questions as well as some very important safety information. Pay special attention to the
Important Safety Instructions located at the beginning of the manual. Your THERMADOR product is ready and waiting to
be used for your next gourmet creation!
Our products are handcrafted with the highest quality authentic materials to ensure years of reliable service. In the unlikely
event that you have a service question, please have your model and serial numbers of your product available (see the
“Before Calling For Service” section for location).
We realize that you have made a considerable investment in your kitchen. Please feel free to share your THERMADOR
kitchen photos and remodeling stories with us. Follow us on Twitter or post your kitchen photos on Facebook. We would
love to hear from you!
THERMADOR wishes you many years of creative cooking.
Félicitations!
Félicitations pour votre récent achat THERMADORmc! Que vous soyez un chef enthousiaste ou un simple connaisseur de
l’art culinaire, le fait de posséder une cuisine THERMADOR représente l’expression ultime de votre style personnel, de
votre bon goût et de votre intérêt à vivre une expérience culinaire complète. Nos produits primés permettent à des adeptes
de la bonne bouffe d’atteindre de nouveaux sommets depuis plus de onze décennies.
Avant de commencer à utiliser votre nouveau produit THERMADOR, veuillez prendre un moment pour examiner ce guide
d’utilisation et d’entretien. Vous trouverez des réponses à toutes vos questions ainsi que quelques renseignements
essentiels en matière de sécurité. Portez une attention particulière aux Instructions de sécurité importantes se trouvant
au début du guide. Votre produit THERMADOR est prêt et n’attend plus que vous l’utilisiez pour votre prochaine création
gastronomique!
Nos produits sont fabriqués à la main avec des matériaux authentiques de haute qualité afin d’assurer des années de
service fiable. Dans l’éventualité improbable où vous auriez une question relativement à l’entretien, veuillez avoir à la
portée de la main le numéro de série et de modèle de votre produit (“Information pour le service technique”).
Nous savons bien que vous avez investi une somme considérable dans votre cuisine. N’hésitez pas à partager avec nous
les photos de votre cuisine THERMADOR et les anecdotes relatives au remodelage de votre cuisine. Suivez-nous sur
Twitter ou affichez des photos de votre cuisine sur Facebook. Nous serions ravis d’avoir de vos nouvelles!
THERMADOR vous souhaite de nombreuses années de gastronomie créative.
This indicates that death or serious injuries may occur as
a result of non-observance of this warning.
CAUTION
This indicates that minor or moderate injuries may occur
as a result of non-observance of this warning.
This THERMADOR® appliance is made by
BSH Home Appliances Corporation
1901 Main Street, Suite 600
Irvine, CA 92614
Questions?
1-800-735-4328
www.thermador.com
NOTICE: This indicates that damage to the appliance or
property may occur as a result of non-compliance with this
advisory.
Note: This alerts you to important information and/or tips.
We look forward to hearing from you!
Table of Contents English | 4 |
Safety
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
PLEASE READ CAREFULLY
WARNING
When properly cared for, your new appliance has been
designed to be safe and reliable. Read all instructions
carefully before use. These precautions will reduce the
risk of burns, electric shock, fire, and injury to persons.
When using kitchen appliances, basic safety precautions
must be followed, including these in the following pages.
WARNING
If the information in this manual is not followed exactly, a
fire or explosion may result causing property damage,
personal injury or death.
— DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
•DO NOT try to light any appliance.
•DO NOT touch any electrical switch.
•DO NOT use any phone in your building.
•Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
•If you cannot reach your gas supplier, call the fire
department.
— Installation and service must be performed by a
qualified installer, service agency or the gas supplier.
Gas and Electrical Requirements
and Grounding Instructions
Gas Type Verification
Verify the type of gas supplied to the location. Ensure that
the appliance is connected to the type of gas for which it is
certified. Make certain your range and gas type are the
same. Refer to the product rating label (see section Before
Calling for Service).
CAUTION
When connecting the unit to propane gas, make certain
the propane gas tank is equipped with its own highpressure regulator in addition to the pressure regulator
supplied with the range. The maximum gas pressure to
this appliance must not exceed 14.0'' water column
(34.9 mb) from the propane gas tank to the pressure
regulator.
IMPORTANT:
Except for PRD305PH, PRG305PH, and PRL305PH
models, when installing against a combustible surface, a
Low Backguard is required. A THERMADOR
Backguard must be purchased separately. Before using the
range, ensure that it is equipped with a proper back guard.
Refer to the Installation Manual accompanying this
appliance for more information.
TM
Low
WARNING
A child or adult can tip the range over and
be killed.Verify that the anti-tip bracket is
securely installed. Ensure the anti-tip
bracket is engaged when the range is
moved.
DO NOT operate the range without the anti-tip bracket in
place. Failure to follow the instructions in this manual can
result in death or serious burns to children and adults.
Check for proper installation and use of anti-tip bracket.
Carefully tip range forward pulling from the back to ensure
that the anti-tip bracket engages and prevents tip-over.
Range should not move more than 1'' (2.5 cm).
Important Safety Instructions English | 5 |
When using the Flush Island Trim, THERMADOR
recommends a minimum 12'' (305 mm) rear clearance to a
combustible surface. Clearances from non-combustible
materials are not part of the ANSI Z21.1 scope and are not
certified by CSA. Clearances of less than 12'' (305 mm)
must be approved by the local codes and/or by the local
authority having jurisdiction.
WARNING
To avoid possible burn or fire hazard, a back guard
designed specifically for this range must be installed
whenever the range is used. Refer to the Installation Manual accompanying this appliance for more
information.
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Electrical Requirements
WARNING
ALWAYS disconnect the electrical plug from the wall
receptacle before servicing this unit.
CAUTION
For personal safety, this appliance must be connected to a
properly grounded and polarized electrical power supply.
WARNING
IN CASE OF AN ELECTRICAL FAILURE
If for any reason a gas control knob is turned ON and
there is no electrical power to operate the electronic
igniters on the range's cooktop STAR
the gas control knob and wait 5 minutes for the gas to
dissipate before lighting the STAR burner manually.
To light the STAR burners manually, carefully hold a
lighted match to the STAR burner ports and turn the gas
control knob to HI
During a power failure, you can use the standard cooktop
STAR burners, but each must be lit with a match.
DO NOT attempt to light the XLO STAR burners manually.
These STAR burners are equipped with the ExtraLow
feature and cannot be lit manually.
See the Installation Manual for electrical requirements and
grounding instructions.
It is recommended that a dedicated circuit servicing this
appliance be provided. See the Installation Manual for
electrical requirements and grounding instructions.
The use of gas cooking appliances results in the production
of heat and moisture.
It is the personal responsibility and obligation of you, the
user, to have this appliance connected to the electrical
power supply by a qualified electrician, in accordance with
the National Electrical Code and/or applicable local codes
and ordinances.
.
®
burners, turn OFF
®
TESTED IN ACCORDANCE WITH:
•ANSI Z21.1, Household Cooking Appliances
•CAN 1-1.1-M81, Domestic Gas Ranges
•UL 858, Household Electric Ranges
•CSA C22.2 No. 61, Household Cooking Ranges
Check your local building codes for the proper method of
installation. In the absence of local codes, this unit should
be installed in accordance with the National Fuel Gas Code
No. Z223.1 current issue and the National Electrical Code
ANSI/NFPA No. 70 current issue or the Can - B149
Installation Codes for Gas Burning Appliances and C22.1
Canadian Electrical Code Part 1.
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
Basic Safety Precautions
When properly cared for, your new range has been
designed to be a safe, reliable appliance. However, use
extreme care when using this restaurant caliber range as
this type of appliance provides intense heat. When using
kitchen appliances, basic safety precautions must be
followed, including the following:
Read this Use and Care Guide carefully before using your
new range, to reduce the risk of fire, electrical shock, or
injury to persons.
Ensure proper installation and servicing. Follow the
installation instructions provided with this product. Have the
range installed and electrically grounded by a qualified
technician.
Have the installer show you where the electric circuit
breaker and the gas supply shut off valve are located so
you know how and where to turn off the gas and electricity
to the range.
In the event a STAR
open a window or a door. DO NOT attempt to use the
range until the gas has had time to dissipate. Wait at least
5 minutes before using the range.
®
burner goes out and gas escapes,
Important Safety Instructions English | 6 |
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
DO NOT repair or replace any part of the appliance unless
specifically recommended in this manual. All other
servicing should be referred to a qualified technician.
If the range is near a window, be certain the curtains do not
blow over or near the range burners; they could catch on
fire.
WARNING
TO REDUCE THE RISK OF A GREASE FIRE:
•Never leave surface units unattended at high settings.
Boilovers cause smoking and greasy spillovers that
may ignite. Heat oils slowly on low or medium
settings.
•Always turn hood ON when cooking at high heat or
when flambéing food (i.e. Crepes Suzette, Cherries
Jubilee, Peppercorn Beef Flambé).
•Clean hood filters frequently. Grease should not be
allowed to accumulate on fan or filter.
•Use proper pan size. Always use cookware
appropriate for the size of the cooktop burner.
WARNING
This appliance should not be installed with a ventilation
system that directs air in a downward direction toward the
range. This type of ventilation system may cause ignition
and combustion problems with the appliance resulting in
personal injury, property damage, or unintended
operation. Ventilating systems that direct the air upwards
do not have any restriction.
ALWAYS have a working smoke detector near the kitchen.
In the event that personal clothing or hair catches fire, drop
and roll immediately to extinguish flames.
Smother flames from food fires, other than grease fires,
with baking soda. Never use water on cooking fires.
Child Safety
When children become old enough to use the appliance, it
is the responsibility of the parents or legal guardians to
ensure that they are instructed in safe operation of the
appliance by qualified persons.
WARNING
DO NOT store items of interest to children above or at the
back of the range. If children should climb onto the
appliance to reach these items, they could be seriously
injured.
DO NOT allow anyone to climb, stand, lean, sit, or hang on
any part of an appliance, especially a door. This can
damage the appliance, and the unit may tip over, potentially
causing severe injury.
DO NOT allow children to use this appliance unless closely
supervised by an adult.
Children and pets should not be left alone or unattended in
the area where the appliance is in use. They should never
be allowed to play in its vicinity, whether or not the
appliance is in use.
NEVER use any part of the range or ovens for storage.
Flammable materials can catch fire and plastic items may
melt or ignite.
DO NOT hang articles from any part of the appliance or
place anything against the ovens. Some fabrics are quite
flammable and may catch on fire.
Use only dry potholders: moist or damp potholders on hot
surfaces may cause burns from steam. DO NOT use a
towel or other bulky cloth in place of potholders. DO NOT
let potholders touch hot elements, hot burners, or burner
grates.
Whenever possible, do not operate the ventilation system
during a cooktop fire. However, DO NOT reach through fire
to turn it off.
NEVER let clothing, potholders, or other flammable
materials come in contact with or too close to any element,
top burner or burner grate until it has cooled. Fabric may
ignite and result in personal injury.
Have an appropriate fire extinguisher available, nearby,
highly visible and easily accessible near the cooking
appliance.
Important Safety Instructions English | 7 |
WARNING
State of California Proposition 65 Warnings:
This product contains chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm.
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
For personal safety, wear proper apparel. Loose fitting
garments or hanging sleeves should never be worn while
using this appliance. Some synthetic fabrics are highly
flammable and should not be worn while cooking.
DO NOT use aluminum foil to line any part of the oven or
range. Use of a foil liner could result in a shock or fire
hazard, or the obstruction of the flow of combustion and
ventilation air. Foil is an excellent heat insulator and heat
will be trapped beneath it. This will upset the cooking
performance and can damage the finish of the oven or the
range.
When using the cooktop: DO NOT TOUCH THE BURNER GRATES OR THE IMMEDIATE SURROUNDING AREA.
Areas adjacent to the burners may become hot enough to
cause burns.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS, IN
THE EVENT OF A RANGE TOP GREASE FIRE,
OBSERVE THE FOLLOWING:
•Smother flames with a close-fitting lid, cookie sheet,
or other metal tray, then turn off the gas burner or the
electric element. Be careful to prevent burns. If the
flames do not go out immediately, evacuate and call
the fire department.
•Never pick up a flaming pan — You may be burned.
•DO NOTUSE WATER, including wet dish cloths or
towels — a violent steam explosion will result.
•Use an extinguisher only if:
•You know you have a class ABC extinguisher and
you already know how to operate it.
•The fire is small and contained in the area where
it started.
•The fire department is being called.
•You can fight the fire with your back to an exit.
Never leave the range unattended when using high flame
settings. Boil overs cause smoking and greasy spillovers
that may ignite. Also, if the burner flames and igniter are
smothered with spillage, unburned gas will escape into the
room. See page 1 regarding gas leaks.
DO NOT heat or warm unopened food containers. Build-up
of pressure may cause the container to burst and cause
injury.
Only certain types of glass, heatproof glass-ceramic,
ceramic, earthenware, or other glazed cookware are
suitable for cooking on the range burners. This type of
cookware may break with sudden temperature changes.
Use only on low or medium heat settings according to the
utensil manufacturer’s directions.
WARNING
RANGE TIPPING HAZARD:
•All ranges can tip and injury can result. To prevent
accidental tipping of the range, attach it to the floor,
wall, or cabinet by installing the Anti-Tip Device
supplied.
•A risk of tip-over may exist if the appliance is not
installed in accordance with these instructions.
•If the range is pulled away from the wall for cleaning,
service, or any other reason, ensure that the Anti-Tip
Device is properly reengaged when the range is
pushed back against the wall. In the event of
abnormal usage (such as a person standing, sitting,
or leaning on an open door), failure to take this
precaution can result in tipping of the range. Personal
injury might result from spilled hot liquids or from the
range itself.
WARNING
The appliance is for cooking. Based on safety
considerations, never use the oven or cooktop to warm or
heat a room. Also, such use can damage the cooktop or
oven parts.
WARNING
NEVER cover any slots, holes, or passages in the oven
bottom or cover an entire rack with materials such as
aluminum foil. Doing so blocks air flow through the oven.
Aluminum foil linings may also trap heat, causing a fire
hazard.
WARNING
NEVER use this appliance as a space heater to heat or
warm the room. Doing so may result in carbon monoxide
poisoning and overheating of the oven.
Important Safety Instructions English | 8 |
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
During cooking, set the burner control so that the flame
heats only the bottom of the pan and does not extend
beyond the bottom of the pan.
WARNING
Avoid using high flame setting with a pan larger than the
grate or with one that spans more than one burner, such
as a griddle, for prolonged periods of time. This can result
in poor combustion that generates harmful by-products.
Use caution to ensure that drafts like those from forced air
vents or fans do not blow flammable material toward the
flames or push the flames so that they extend beyond the
edges of the pot.
Always use pots and pans that have flat bottoms large
enough to cover the burner. The use of undersized pots
and pans could expose a portion of the flame and may
result in ignition of clothing.
To minimize the risk of burns, ignition of flammable
materials and unintentional spillage, position handles of
pots and pans inward so they do not extend over adjacent
work areas, cooking areas, or the edge of the range's
cooktop.
DO NOT use pots or pans on the grill plate accessory.
Bakeware, such as large casserole pans, cookie sheets,
etc., should never be used on the cooktop.
Clean the range with caution. Avoid steam burns; DO NOT
use a wet sponge or cloth to clean the range while it is hot.
Some cleaners produce noxious fumes if applied to a hot
surface. Follow directions provided by the cleaner
manufacturer.
WARNING
After a spill or boil over, turn off the burner and using
caution due to possible hot surfaces, clean around the
burner and burner ports. After cleaning, check for proper
operation.
Ensure all cooktop controls are turned off and the cooktop
is cool before using any type of aerosol cleaner on or
around the cooktop. The chemical that produces the
spraying action could, in the presence of heat, ignite or
cause metal parts to corrode.
Place oven racks in desired position while oven is cool. If a
rack must be moved while the oven is hot, do not let the
potholders contact the broiler element.
When using the oven do not touch the broiler element, the
interior surfaces of the oven or the exterior area
immediately surrounding the door. Interior oven surfaces
become hot enough to cause burns. The heat deflector,
which deflects heat away from the cooktop and the trim on
the top and sides of the oven door, will also be hot when
the oven is in use.
DO NOT use flammable cleaners to clean the range.
Hold the handle of the pan to prevent movement when
stirring or turning food.
Remove the optional cutting board or griddle cover
accessory, which is stored on top of the griddle plate,
before operating the griddle or any adjacent burners.
GREASE IS FLAMMABLE. Let hot grease cool before
attempting to handle it. Avoid letting grease deposits
collect. Clean after each use.
For proper lighting and performance of the burners, keep
the igniter ports clean. It is necessary to clean the ports
when there is a boil over or when the burner does not light
even though the electronic igniters activate.
Important Safety Instructions English | 9 |
Use care when opening the oven door; let hot air or steam
escape before removing or replacing foods.
Before self-cleaning the oven (select models), remove the
broiler pan, oven racks, and any other utensils, and excess
spillage.
Please note that some pets or humans can be sensitive to
the odors created during the self-cleaning process whether
it is a manufacturing residue burn off or food, so it is
recommended that those potentially affected be removed
from the kitchen area during the self-clean process.
DO NOT clean, rub, damage, move or remove the door
gasket. It is essential for a good seal during baking. If the
gasket becomes worn or excessively soiled with food
particles, replace gasket to assure a tight seal.
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Protect the self-cleaning feature. Clean only those parts
indicated in this booklet. DO NOT use commercial oven
cleaners or oven liner protective coatings of any kind in or
around the self-cleaning oven(s).
For safety reasons and to avoid damage to the range,
never sit, stand, or lean on the oven door.
Service should only be done by authorized technicians.
Technicians must disconnect the power supply before
servicing this unit.
Listen to be sure the cooling blower runs whenever the
oven controls are set to BROIL or BAKE modes, after oven
heats to 300°F (149°C) — see “Automatic operation of the cooling blowers”. If the fan does not operate, do not use the
oven. Call an authorized service center for service.
To avoid a fire hazard, grease accumulation must be
prevented by frequently cleaning the ventilation hood and
filters.
DO NOT use the optional grill plate for cooking excessively
fatty meats or products which promote flare-ups.
When cooking fatty or oily foods on burners, the grill, or the
griddle, adjacent gas burners can ignite airborne fumes.
Use caution to avoid burns.
Remove all tape and packaging before using the appliance.
Destroy the packaging after install. Never allow children to
play with packaging material.
DO NOT store or use corrosive chemicals, vapors,
flammables, or nonfood products in or near this appliance.
It is specifically designed for use when heating or cooking
food. The use of corrosive chemicals while heating or
cleaning will damage the appliance and could result in
injury.
DO NOT obstruct the flow of combustion or ventilation air.
WARNING
DO NOT block or obstruct the flow of air
through the ventilation openings. The oven
vent is located at the back of the appliance.
The vents need to be unobstructed and open
to provide necessary airflow that is important
for proper oven performance.
DO NOT touch oven vent area while the
appliance is on and for several minutes after
the appliance is off. Some parts of the vent
and surrounding areas become hot enough
to cause burns. Allow appliance sufficient
time to cool before touching or cleaning vent
areas.
In case of fire or when intentionally “flaming” liquor or other
spirits on the range's cooktop, follow manufacturer’s
instructions. Use caution when cooking foods with high
alcohol content (e.g. rum, brandy, bourbon) in the oven.
Alcohol evaporates at high temperatures. There is a risk of
burning as the alcohol vapors may catch fire in the oven.
Use only small quantities of alcohol in foods, and open the
oven door carefully.
WARNING
To avoid risk of burn, turn the hood ON when cooking at
high heat or when flambéing food.
DO NOT use all heating elements or gas burners
simultaneously at high settings for a prolonged period.
(max.15 minutes).
If the hood is located over a gas cooktop, operate the
hood at maximum setting whenever three or more gas
burners are being used.
DO NOT operate the ventilation system during a cooktop
fire.
DO NOT position plastic or other heatsensitive items on or near the oven vent.
These items could melt or ignite.
IMPORTANT:
There is a possibility to discolor the back wall under certain
cooking conditions.
Important Safety Instructions English | 10 |
Description
3
5
0
0
0
3
5
0
0
Parts Identification
Control Panel Identification
ExtraLow® Knob
Gas Oven Temp
Standard KnobGriddle KnobGrill KnobDual Fuel Oven Temp
Model shown is 48'' with Griddle and
Grill Options (models will vary)
1
2
2
3
4
1. Flush Island Trim (shown), Low
Back (sold separately), or Zero
Clearance Trim (available on 305''
models only)
5
2. Burner Grates & Burners
3. Electric Grill (option)
4. Electric Griddle (option)
5. Control Panel
6. Secondary Oven (48'' models only)
7. Main Oven
7
6
8. Kick Panel
9. Range Feet
WARNING:
To provide proper ventilation of the
9
9
8
range, DO NOT remove range feet.
Figure 1: 48'' Dual Fuel Range Identification
Description English | 11 |
Dual Fuel Oven Interior Identification
2
1
4
5
6
Electric Secondary Oven Interior
(48'' models only)
1. Oven Interior Light
2. Broil Element
3. Oven Thermostat
4. Rack Guides
5. Oven Racks (2 included)
6. Bake Element (hidden)
2
3
4
1
7
6
3
5
Electric Main Oven Interior
1. Oven Interior Light
2. Broil Element
3. Oven Thermostat
4. Rack Guides
5. Oven Racks (3 included, 1 shown)
6. Bake Element (hidden)
7. Convection Fan Cover
Figure 2: Dual Fuel Main Oven Interior Identification
Gas Oven Interior Identification
3
1
5
Gas Secondary Oven Interior
(48'' models only)
1. Oven Interior Light
2. Broil Ignitor
3. Infrared Broil Burner
4. Oven Thermostat
5. Rack Guides
6. Oven Racks (2 included)
7. Bake Burner (hidden)
2
4
6
7
3
1
2
8
7
Gas Main Oven Interior
1. Oven Interior Light
2. Broil Ignitor
3. Infrared Broil Burner
4. Oven Thermostat
5. Rack Guides
6. Oven Racks (3 included)
7. Bake Burner (hidden)
8. Convection Fan Cover
4
5
6
Figure 3: Gas Main Oven Interior Identification
Description English | 12 |
Before You Begin
Getting Started
Data Rating Label
Record the Model and Serial number on page 58 (see
“Data Rating Label”). The model and serial number must
be provided when calling Customer Support for assistance.
Enter this information on the Product Registration Form
included with this product then mail it to the indicated
address.
Oven Racks
®
Placing Full Access
1. Hold the rack on a slight angle. Place the safety hooks
under the front of the rack guides.
Racks in the Oven
CAUTION
To help prevent burns, never remove or reposition the
oven racks while the oven is ON or while the oven is
cooling.
WARNING
Aluminum foil should NEVER be used to cover the oven
racks or to line the oven. It can damage the oven and
cause a fire hazard if heat is trapped under it.
Oven Rack Positions
The correct rack position depends on the recipe and the
cooking mode. The rack positions are numbered from the bottom of the oven, like an elevator. Rack position 3
is the most frequently used position. Place rack(s) in the
proper position before turning on the oven.
5
4
2. Push the rack into the oven, lifting the rack stops over
the front of the rack guides.
3. Hold the rack straight.
4. Push the rack in until it is even with the front hooks.
5. Lift the rack up.
6. Push the rack in completely.
7. Engage the rack’s front hooks on the rack guides.
3
2
1
IMPORTANT: When placing the gliding rack in the oven,
Figure 4: Oven Rack Positions
Before You Begin English | 13 |
make sure the front supports on the rack guides rest in the
large slots at the front corners of the rack. This is
necessary to keep the rack in the correct position while
fully inserted into the oven.
Figure 5: Inserting the Gliding Oven Rack
Placing Flat Racks in the Oven
Surface Burners
The rack is designed with a stop so it will stop before
coming completely out of the oven and not tilt.
1. Grasp rack firmly on both sides.
2. Insert rack (see picture).
3. Tilt rack up to allow stop into rack guide.
4. Bring rack to a horizontal position and push the rest of
the way in. Rack should be straight and flat, not
crooked.
Figure 6: Inserting the Oven Rack
IMPORTANT: Always remove the oven racks before
self-cleaning the oven. If the gliding racks remain in
the oven during Self-Clean, lubricants in the glide
mechanisms of each rack will be lost and the finish will
discolor.
1. Ensure that the burner caps are correctly seated on the
burner bases of the range's cooktop (see page 16).
2. Turn on each burner to check for proper flame color.
See “Flame Description” on page 18 for details.
Oven Operation
1. Before baking or broiling, the oven and broiler should
be turned on to burn off the manufacturing oils using
one of the two following methods:
•Turn on kitchen ventilation (or if vent hood is a
recirculation type open a window). Turn the oven
on to 450ºF (230ºC) for 20 to 30 minutes; then turn
the broiler to BROIL for the same length of time.
Please note that it is normal for small amounts of
smoke to be visible from the range during this initial
breaking-in process.
•Turn on kitchen ventilation (or if vent hood is a
recirculation type open a window). Remove oven
racks. Set oven SPEED CLEAN and let self-clean
run (some models only. See “Self-Cleaning the Oven (Dual Fuel Models Only)” on page 37).
Please note that some pets or humans can be sensitive to
the odors created during the self-cleaning process whether
it is a manufacturing residue burn off or food, so it is
recommended that those potentially affected be removed
from the kitchen area during the self-clean process.
ALWAYS REMOVE BEFORE SELF CLEAN
Figure 7: Full Access Oven Rack
ALWAYS REMOVE BEFORE SELF CLEAN
The range occasionally has a smell or smoke when first
used. These smells or smoke comes from the burning off of
manufacturing residues and is typical of any new oven
regardless of manufacturer.
Please read “Care and Maintenance” before cleaning
the oven racks.
Note: It is normal for the cooling process to push heated air
out into the room when the oven is on.
Figure 8: Flat Oven Rack
Before You Begin English | 14 |
Using The Cooktop
Sealed STAR® Burners
1
2
3
4
1. Left rear burner (Natural Gas 18000 BTUs, LP 15000
BTUs) — ExtraLow® Burner
2. Left front burner (Natural Gas 18000 BTUs, LP 15000
BTUs) — ExtraLow Burner
3. Right rear burner (Natural Gas 18000 BTUs, LP
15000 BTUs)
4. Right front burner (Natural Gas 18000 BTUs, LP
15000 BTUs)
Figure 9: Model PRD304 & PR(G/L)304
1
2
3
4
5
6
1. Left rear burner (Natural Gas 18000 BTUs, LP 15000
BTUs) — ExtraLow® burner
2. Left front burner (Natural Gas 18000 BTUs, LP 15000
BTUs) — ExtraLow burner
3. Center rear burner (Natural Gas 18000 BTUs, LP
15000 BTUs)
4. Center front burner (Natural Gas 18000 BTUs, LP
15000 BTUs)
5. Right rear burner (Natural Gas 18000 BTUs, LP
15000 BTUs)
6. Right front burner (Natural Gas 18000 BTUs, LP
15000 BTUs)
Figure 11: Model PRD364, PRD366, PRD486, PR(G/L)364,
PR(G/L)366, PR(G/L)486
1
3
2
4
5
1. Left rear burner (Natural Gas 8000, LP 6000 BTUs)
— ExtraLow
®
Burner
2. Left front burner (Natural Gas 10000, LP 9100 BTUs)
3. Center burner (Natural Gas 15000, LP 11000 BTUs)
4. Right rear burner (Natural Gas 8000, LP 6000 BTUs)
5. Right front burner (Natural Gas 18000 BTUs, LP
14000 BTUs) — ExtraLow
Figure 10: Model PRD305 & PR(G/L)305
®
Burner
Using The Cooktop English | 15 |
Burner Cap Placement
Star
®
Star
®
Checking Burner Cap Placement
Each cap has a letter (B, D, or F) cast in the underside of
the cap that corresponds to a letter (B, D, or F) cast in the
burner base that is attached to the appliance.
•Place each burner cap on its correct burner base per
its corresponding letter designation. See figure below.
Figure 12: STAR Burner Components
•Place burner cap gently on top of base so that the
prongs of the burner base fit snugly into the groove of
the burner cap.
•Check each burner to make sure there is no gap
between the burner cap and burner base. See
Figure 13: Correct and Incorrect Burner Cap
Placement to see examples of correct and incorrect
placements of the burner cap.
•You may gently try to move the burner caps from side
to side to check if the caps are properly placed on the
burner bases. When properly placed, each burner cap
will rest flat on top of its burner base, and completely
cover the star-shape of the burner base when viewed
from the top as shown in Figure 13.
Burners Caps
The burner caps must be properly placed on the burner
bases for the cooktop to function properly. If the burner cap
is not properly placed, one or more of the following
problems may occur:
•Burner flames are too high.
•Flames shoot out of burners.
•Burners do not ignite.
•Burner flames light unevenly.
•Burner emits gas odor.
WARNING
To prevent flare-ups and avoid the creation of harmful byproducts, do not use the cooktop without all burner caps
and all burner grates properly positioned.
WARNING
To prevent burns, do not touch burner caps or grates
while hot. Turn the cooktop off and allow the burners to
cool.
Figure 13: Correct and Incorrect Burner Cap Placement
Burner Grate Placement
Ensure the burner grates are properly placed on the
cooktop before using the surface burners. The grates are
designed to rest inside the recess on the cooktop.
To install burner grates, place grates flat-side down and
align into the cooktop recess. Grates should rest flush
against each other and against the sides of the recess.
Figure 14: Burner Grate Placement
Using The Cooktop English | 16 |
Control Knobs
ExtraLow
Range
The control knobs for two sealed gas burners, one in front
and one in the rear, are located directly in front of and
below the pair of burners on the control panel. Each burner
has its own control knob. The symbol above each control
knob identifies the burner position on the cooktop.
Operation of the Burners
1. Press in on the knob and turn it counter-clockwise to
the HI setting on the knob.
–The igniter for the selected burner clicks and
sparks.
–After burner ignition, the igniter stops clicking.
2. Rotate the knob to any flame setting between HI and
SIM.
–The blue signal light, between the burner knobs,
will light when adjacent burners are lit. The light will
remain on until the adjacent burners are turned off.
ExtraLow
The controls for the ExtraLow burners have flame settings
even lower than the standard SIM settings.
The drawing shows that the control knob has an additional
range between the SIM and XLO settings. When the knob
is set within this range, the flame cycles off and on. By
varying the length of time the flame is off and on, the heat is
reduced even further to cook delicate foods. For example,
these very low settings are suitable for simmering and
poaching, melting chocolate and butter, holding cooked
foods at temperatures without scorching or burning, etc.
®
Burners
ExtraLow
ExtraLow
Range
Range
OFF
F
OF
XLO
Operation of the ExtraLow Burners
•XLO, the very lowest setting, is achieved by cycling the
flame ON for approximately 7 seconds and OFF for 53
seconds of each minute.
•When the knob is set just below the SIM setting, the
flame will cycle ON for approximately 53 seconds and
OFF for 7 seconds of each minute.
•To vary the amount of low heat to suit the food and
quantity, the control can be set anywhere within the
SIM and XLO range marked on the knob.
•The XLO knobs are disabled during self-clean (Dual
Fuel models only). The knob functions will remain
unavailable until after the oven unlocks.
ExtraLow Techniques
•The type and quantity of food affects which setting to
use.
•The pan selected affects the setting. Its size, type,
material, and whether a lid is used, all affect the
consistency of the cooking temperature.
•To maintain a low or simmer heat, bring food to a
rolling boil. Stir well, then cover the pan and lower the
heat to a setting just below SIM.
•Check periodically to see if the control knob should be
turned to another setting.
•If a large pan is used, the simmer action may occur
mainly in the center of the pan. To equalize the
temperature throughout the food, stir the food around
the outer edges of the pan into the food in the center.
•It is normal to stir food occasionally while simmering.
This is especially important when simmering for several
hours, such as for a homemade spaghetti sauce or
beans.
•When lowering the flame setting, adjust it in small
steps.
•If the setting is too low to hold a simmer, bring the food
back to a boil before re-setting to a higher heat.
•It is normal not to see simmer bubbles immediately
after the food has been stirred.
•There may be bubbling when the flame cycles ON and
no bubbles when the flame is OFF. Even when the
flame is OFF, there will be steam and a slight quiver on
the liquid’s surface.
XLO
Figure 15: ExtraLow Burner Control Knob
Using The Cooktop English | 17 |
Automatic Re-Ignition
Flame Height
Each burner has its own electronic igniter that sparks when
the burner is turned on. Each burner should light in 4
seconds or less. If a burner does not light, check to see that
the cap is positioned correctly on the base.
If any one or more burners blow out, the electronic igniter
automatically activates to re-light the flame. Do not touch
the burners when the igniters are active.
CAUTION
®
DO NOT touch the STAR
sparking.
IMPORTANT:
•For proper combustion do not use the cooktop without
the burner grates in place.
•There is a slight sound associated with gas combustion
and ignition. This is a normal condition.
•On cooktops using propane gas (LP), a slight “pop”
sound may be heard at the burner ports a few seconds
after the burner has been turned off.
burners when the igniters are
Power Failure
•In the event of a power failure, only the standard
burners can be manually lit. It is necessary to light each
one individually.
•If the cooktop is being used when the power failure
occurs, turn all knobs to the OFF position.
•The standard burners can be lit by holding a match at
the ports and turning the control knob to the HI
position. Wait until the flame is burning all around the
burner cap before adjusting the flame to the desired
height.
•The ExtraLow
failure. Be sure to turn them off.
•If an ExtraLow burner is on when a power failure
occurs, it cannot be turned back on until the knob is
first turned off.
•The griddle cannot be used during a power failure.
•If you smell gas, refer to safety precautions listed on
page 5.
®
burners cannot be used during a power
•The correct flame height depends on 1) size and
material of pan being used; 2) food being cooked; and
3) amount of liquid in the pan.
•Never extend the flame beyond the base of the pan.
•Use a low or medium flame for pan materials that
conduct the heat slowly, such as porcelain coated steel
or glass-ceramic.
Flame Description
Yellow Flames:
Further Adjustment is required.
Yellow Tips on Outer Cones:
Normal for LP Gas
Soft Blue Flames:
Normal for Natural Gas
If the flame is completely or mostly yellow, verify that the
regulator is set for the correct fuel. After adjustment,
retest.
Some orange-colored streaking is normal during the initial
start-up. Allow unit to operate 4-5 minutes and re-evaluate
before making adjustments.
Figure 16: Flame Characteristics
•The burner flame color should be blue with no yellow
on the tips. It is not uncommon to see orange in the
flame color; this indicates the burning of airborne
impurities in the gas and will disappear with use.
•With propane (LP) gas, slight yellow tips on the primary
cone are normal.
•The flame should burn completely around the burner
cap. If it doesn’t, check that the cap is positioned
correctly on the base and that the ports are not
blocked.
•The flame should be stable with no excessive noise or
fluttering.
WARNING
In the event of a power failure, turn all knobs to the OFF
position. Only the Standard burners can be lit manually.
Using The Cooktop English | 18 |
Cookware Recommendations
WARNING
To avoid risk of serious injury, damage to appliance
or cookware, please observe the following:
•Bakeware, such as large casserole pans, cookie
sheets, etc. should never be used on the cooktop.
•Placement of large stock pots should be staggered
when used on the cooktop.
Figure 17: Stagger Pots
•Select the base diameter to match the diameter of the
flame. The diameter of the flame should be the same
size as the pan base or slightly smaller. Oversize or
under size pans sacrifice cooking performance. A 5½''
(140 mm) base size is generally the smallest
recommended.
•Avoid using high flame setting with a pan larger than
the grate or with one that spans more than one burner,
such as a griddle, for prolonged periods of time. This
can result in poor combustion that generates harmful
by-products.
•Balance is important for stability and even cooking. The
handle must not be heavier than the pan and tilt it
unevenly. A pan must sit level on the grate without
rocking or wobbling.
•Food packaged in aluminum foil should not be placed
directly on the burner grate. Aluminum foil can melt
during cooking.
•Do not let plastic, paper or cloth come in contact with a
hot burner grate. They may melt or catch fire.
•Never let a pan boil dry. This can damage your pan and
the cooking surface.
•Professional quality pans with metal handles are
recommended because plastic handles can melt or
blister if the flame extends up the side of the pan.
Professional quality pans are found at restaurant
supply stores and gourmet specialty shops. All
cookware should have these characteristics: good heat
conductivity, good balance, correctly sized base
diameter, a heavy, flat base, and a proper fitting lid.
•For best cooking results, the flame should be contained
under the bottom of the pan.
•Aluminum and copper are pan materials that conduct
the heat quickly and evenly. These metals are
sometimes attached to the base or in the core between
stainless steel.
•A heavy, flat base is more apt to remain flat when
heated. Pan bases that are warped, dented, ridged or
too lightweight will heat unevenly. Heat and cool pans
gradually to avoid sudden temperature changes which
tend to distort cookware. DO NOT add cold water to a
hot pan.
Figure 19: Flat Base Pan
•A properly fitting lid will shorten cooking time and make
it possible to use lower heat settings.
Figure 18: Balanced Pan
Figure 20: Covered Pan
Using The Cooktop English | 19 |
Specialty Cookware
Standard Size Pressure Canner
•8 to 22 quarts (7.6 to 20.9 liters), with an 8'' to 11'' base
(203–279 mm) and a 6½'' to 12'' depth (165–305 mm).
Woks
•Either flat-based or round-bottom woks with the
accessory ring can be used on all models. Round
bottom woks must be used with a support ring. The
Wok pan and the porcelain-coated cast iron wok
support ring must be purchased separately.
Figure 21: Flat-Bottom Wok Pan
Canning Tips
•A flat base pan is preferred to one with a concave,
convex or rippled base.
•When using two canners at the same time, use
staggered burners. Do not block air to the burners. A
flame needs the right amount of air for complete
combustion.
•Use a cover on a canner when bringing the contents to
a boil.
•Once the contents have reached a boil on HI, use the
lowest flame possible to maintain the boil or pressure.
•Canning produces a large amount of steam. Take
precautions to prevent burns.
Suggestions For Using the Surface Burner
Cooking Recommendations
•Use the chart beginning on page 21 as a guide. The
settings you use will vary depending on the pans
selected and the starting temperature of the food.
•On the chart, the “Finish Setting” has been separated
for the standard and ExtraLow burners. There may or
may not be a change between the two burner settings.
•The ExtraLow
holding setting.
•Raise or lower the flame setting gradually. Allow time
for the pan and the food to adjust to the new setting.
®
setting can be either a cooking or a
Figure 22: Round-Bottom Wok in Support Ring
Canners and Stock Pots
•Select one with a base diameter that extends no more
than 2'' (51 mm) beyond the grate.
Standard Size Water Bath Canner
•21 to 22 quarts (19.95 to 20.9 liters), with an 11'' to 12''
base (279–305 mm) and a 9'' to 11'' depth (229–279
mm).
Using The Cooktop English | 20 |
Surface Burner Cooking Recommendations
FOOD START SETTING
BEVERAGES
Cocoa
BREADS
French Toast,
Pancakes, Grilled
Sandwiches
BUTTER
Melting
CEREALS
Cornmeal, Grits,
Oatmeal
CHOCOLATE
Melting
DESSERTS
Candy
Pudding and Pie Filling
Mix
Pudding SIM to MED SIM – bring
EGGS
Cooked in Shell
Fried, Scrambled SIM to MED – melt butter,
PoachedHI – bring water to the
MEAT, FISH, POULTRY
Bacon, Sausage
Patties
Braising: Swiss Steak,
Pot Roast, Stew Meat
Quick Frying:
Breakfast Steaks
Frying: Chicken MED HI – heat oil, then
Deep Frying: Shrimp MED HI – heat oil MED to MED HI – to
MED – preheat skillet SIM to MED – cook Same as for Standard Burners
SIM – to start melting Allow 5 – 10 minutes to melt
HI – cover, bring water to a
boil, add cereal
XLO – may be stirred to
hasten melting
SIM to MED – cook
following recipe
SIM to MED SIM– cook
according to package
directions
milk to a boil
MED HI – cover eggs with
water, add lid, bring to boil
add eggs
boiling point, add eggs
MED HI – until meat starts
to sizzle
MED HI – melt fat, then
brown on MED HI, add
liquid, cover
MED HI – preheat skillet MED HI – fry quickly Same as for Standard Burners
brown on MED
FINISH SETTING
STANDARD BURNERS
SIM to MED – finish
cooking according to
package directions
SIM to MED Same as for Standard Burners
SIM Same as for Standard Burners
SIM Same as for Standard Burners
XLO – cook 3 – 4 minutes for
SIM finish cooking Same as for Standard Burners
SIM
to MED – finish
heating
SIM to MED – finish
cooking
SIM – cover, finish
cooking
maintain temperature
FINISH SETTING XLO
BURNERS
Same as for Standard Burners
XLO – to hold, cover*
XLO – allow 10 – 15 minutes
to melt
XLO – to hold*
soft cooked; or 15 – 20
minutes for hard cooked
XLO – to hold for a short
period*
Same as for Standard Burners
Same as for Standard Burners
XLO – Simmer until tender
Same as for Standard Burners
Same as for Standard Burners
* These foods should be stirred occasionally.
Using The Cooktop English | 21 |
FOOD START SETTING
FINISH SETTING
STANDARD BURNERS
FINISH SETTING XLO
BURNERS
Pan Frying: Lamb
Chops, Thin Steaks,
Hamburgers, Link
Sausage
Poaching: Chicken,
whole or pieces, Fish
Simmering: Stewed
Chicken, Corned Beef,
Tongue, etc.
PASTAS
Macaroni, Noodles,
Spaghetti
POPCORN
(use a heavy, flat
bottom pan)
PRESSURE COOKER
Meat
Vegetables HI – build up pressure SIM to MED – maintain
RICE HI – cover, bring water and
SAUCES
Tomato Base
White, Cream,
Bernaise,
Hollandaise XLOXLO
SOUPS, STOCK HI – cover, bring liquid to a
VEGETABLES
Fresh
Frozen HI – cover, bring water and
Deep Frying HI – heat oil MED to MED HI –
In PouchHI – bring water and pouch
Saute HI – heat oil or melt butter,
Stir Fry HI – heat oil, add
MED HI – preheat skillet MED – brown meat Same as for Standard Burners
MED HI – Cover, bring
liquids to a boil
HI – cover, bring liquid to a
boil
HI – bring water to a boil,
add pasta
HI – cover, heat until
kernels start to pop
MED HI to HI – build up
pressure
rice to a boil
MED HI – cook meat/
vegetables, follow recipe
MED – melt fat, follow
recipe
boil
HI – cover, bring water and
vegetables to a boil
vegetables to a boil
to a boil
add vegetables
vegetables
MED HI to HI – to
maintain a rolling boil
MED HI – finish poppingSame as for Standard Burners
SIM to MED – maintain
pressure
pressure
SIM – to maintain Low
Boil. Cover and cook until
water is absorbed
SIM – to maintain simmerXLO – simmer to thicken
SIM – finish cooking XLO – to hold, cover*
SIM to maintain simmerSimmer XLO – to hold, cover*
SIM to MED – cook 10
minutes, or until tender
SIM to MED – cook
according to package
directions
maintain frying
temperature
SIM to MED – cook
according to package
directions
SIM to MED – cook to
desired doneness
HI to MED HI – finish
cooking
XLO – to hold
To finish cooking
XLO – to simmer slowly
XLO – to hold, cover
Same as for Standard Burners
Same as for Standard Burners
Same as for Standard Burners
Same as for Standard Burners
XLO – to hold, cover
sauce, uncovered
– to hold, lowest setting
for short period, stir frequently
Same as for Standard Burners
XLO – to hold, cover
Same as for Standard Burners
Same as for Standard Burners
Same as for Standard Burners
Same as for Standard Burners
Same as for Standard Burners
* These foods should be stirred occasionally.
Using The Cooktop English | 22 |
Using the Electric Griddle
(available on some models)
Description
The built-in griddle is made of restaurant-quality aluminum
with a non-stick coating. This produces a surface with even
heat that is easy to clean.
A maple chopping block, stainless steel cover, and coatedaluminum grill plate are available as accessories and are
purchased separately. The maple chopping block and
stainless steel cover are sized to fit on top of the surface
when the griddle is not being used. The coated-aluminum
grill plate accessory is designed to replace the griddle
plate. See the instructions that come with the accessory for
details.
The maple chopping block and stainless steel cover must
be removed before turning the griddle on.
3. Move the griddle plate to the side (Figure 23).
Figure 23: Griddle Plate Leveling Screws
4. Adjust the two screws under the back of the plate. Start
with one half turn counterclockwise of the screws
(Figure 23).
5. Further adjustment should be made by one-quarter
turn until water slowly flows into the grease tray.
CAUTION
The griddle element is hot after use. Allow sufficient time
for griddle components to cool before cleaning.
WARNING
To avoid risk of injury, NEVER operate griddle without the
griddle plate installed. NEVER use griddle in a manner
that is not prescribed by the Use and Care Guide.
The griddle plate (or grill plate accessory) must always be
in place when the griddle is turned on.
The griddle is electronically controlled with temperatures
marked on the knob from 150 – 500°F (66 – 260°C).
There are no fixed settings on the knob.
Preparing the Griddle
1. The griddle plate should be washed with warm soapy
water then rinsed with clear water prior to use.
2. Check the griddle plate adjustment by pouring two
tablespoons of water on the back of the griddle plate.
--The water should slowly roll into the grease tray.
The griddle may be used without any butter, margarine or
oil. However, a very small amount may be used to flavor
foods.
DO NOT use metal utensils on the griddle surface. Care
should be taken that the surface is not gouged when
utensils are used. DO NOT cut directly on the griddle plate.
NOTICE: Performance may vary if there is an excessive
amount of airflow in the vicinity of the appliance. The
excessive airflow could be from an air-conditioning register
or ceiling fan blowing at the cooktop. This could create
longer than normal heat-up time, or it could cause the
temperature to be higher or lower than the knob setting.
NOTE: Having a properly installed ventilation hood is not
considered a source of excessive airflow.
Using the Electric Griddle English | 23 |
Cooking on the Griddle
1. Turn the knob to the appropriate cooking temperature
to preheat the griddle.
2. Preheat until the griddle light goes off.
3. Add butter, margarine, oil or shortening if desired.
Use the lowest cooking temperature possible. Recipes may
need to be modified as the non-stick coating browns and
sears at lower temperatures.
425°F – 450°F
350°F – 375°F
Griddle Grease Tray
Figure 24: Grease Tray
•Clean the tray after every use. When removing the tray,
use care when tipping it so that the contents do not
spill.
•The griddle plate and its grease tray are dishwasher
safe.
•After cooling, pour the grease into a grease-resistant
container for disposal.
Care and Cleaning the Griddle Plate
•NEVER flood a hot griddle plate with cold water. This
can damage the griddle plate.
•DO NOT clean the griddle plate in a self-cleaning oven.
•Care should be taken to avoid scratching or gouging
the surface.
•DO NOT cut food directly on the griddle plate.
•DO NOT use metal utensils.
•Use plastic or wood utensils to avoid scratching the
non-stick surface.
•The griddle plate is dishwasher safe, however, hand
washing the griddle plate is recommended.
Using the Electric Griddle English | 24 |
Instructions for Seasoning the
Griddle Plate
Griddle Seasoning
Seasoning is a process by which a layer of animal fat or
vegetable oil is applied and baked into the cookware. The
seasoning layer provides a non-stick surface for cooking.
If the griddle plate seems to lose its non-stick abilities over
time, the following instructions should help regain the
griddle’s non-stick properties. For optimal performance and
long life of your griddle plate, follow these simple cleaning
and seasoning instructions.
Prepping the Griddle for Seasoning
The griddle plate must be clean and all residue removed
before the griddle plate is seasoned.
1. Use a mixture of coarse salt and a small amount of
white vinegar to buff off any residue from the griddle
plate.
~WHITE~
VINEGAR
1. Use a paper towel to apply a thin, even coating of lard,
2. Bake the griddle plate in a 350°F oven for 1 hour.
3. Remove the griddle plate from the oven and allow to
4. Apply a second layer of fat or oil and bake at 350°F for
5. Repeat process at least one additional time – making 3
®
Crisco
cool to room temperature.
1 hour.
coats of oil or fat.
, or olive oil to the griddle surface.
Figure 26: Griddle Seasoning
Figure 25: Griddle Preparation
2. Rinse well with clean water.
3. Dry the griddle plate thoroughly.
After Seasoning
1. After cooking on your seasoned griddle, allow to cool
and wipe clean with a damp cloth. Allow to dry.
2. Add a thin coating of oil or fat before storing your
griddle in a cool, dry place.
3. Repeating this process will season the griddle and
maintain non-stick properties. Performance will
improve over time with more seasoning.
4. To strip the griddle to re-season, a mixture of salt and
vinegar should be used to remove any oil layers from
the previous seasoning process.
Using the Electric Griddle English | 25 |
Using the Electric Grill
(available on some models)
Description
The built-in grill is made of restaurant-quality cast iron
grates. This produces a surface with even heat that is easy
to clean.
A non-stick cast iron griddle plate (PAGRIDDLEN) is
available as an accessory and may be purchased
separately. See the instructions that come with the griddle
plate accessory for more details.
Assembling the Grill
1. Rotate heating elements (6) up and remove the
briquette basket (3) stored inside the grill housing (1).
2. Place the drip tray (2) in the bottom of the grill housing
(1). (Drip tray is packaged in the large cardboard box
that was on top of the range.) Align the embosses of
the drip tray (2) with the depressions on the bottom of
the grill housing (1).
3. Place the briquette basket (3) in the grill housing (1).
4. Arrange the ceramic briquettes (4) on the briquette
basket (3), in a single layer, with each briquette
touching the edges of the surrounding briquettes. The
ceramic briquettes should not contact the heating
elements.
5. Fold both grill heating elements (6) down. The grill
heating elements must lie flat. Supports should rest
inside of side notches.
6. Install the grill grates (5). Ensure grates are seated
level inside the grill housing (1).
--The grill grates should be washed with warm soapy
water then rinsed with clear water prior to use.
1. Grill Housing
2. Drip Tray
3. Briquette Basket
4. Ceramic Briquettes
5. Grill Grate (x2)
6. Heating Element (x2)
5
4
3
6
2
1
Operating the Grill
WARNING
•To avoid risk of injury, NEVER operate grill without the
grates or griddle plate accessory installed.
•NEVER leave grill unattended while cooking.
•Observe caution with oils and fats. Overheated oils
and fats can easily cause fires.
•DO NOT use wood chips, lava rocks, or charcoal
briquettes. Only use recommended ceramic
briquettes (PABRICKBKN).
•DO NOT use dishes, pans, pots, or other cookware
on the grill.
•Never use aluminum foil to cover the grates or to line the grill. It can damage the grill and cause a fire
hazard if heat is trapped under it.
•Check grease tray before each use. Too much grease
in the tray may cause a fire hazard.
•If flames appear, grease should be cleaned from
grates, grease tray, briquette basket and other
surfaces.
•Grease build up encourages flame and smoke
development while cooking.
•Ceramic briquettes must be replaced when they begin
to turn black. This means that they are saturated with
fat and may smoke heavily during operation or the fat
may catch fire.
Figure 27: Grill Assembly
Using the Electric Grill English | 26 |
IMPORTANT:
•If flames appear while grilling, turn off heat and
remove the food. Use caution to avoid any
potential injury while removing food.
•Often, such flames will extinguish themselves
within a few minutes once grease drippings have
burned up. DO NOT leave the grill unattended until
all flames are extinguished. If desired, flames can
be extinguished by generously shaking baking
soda or salt over them to smother fire.
•If flames appear, ceramic briquettes should be
replaced and grease should be cleaned from
grates, grease tray, briquette basket, and other
surfaces before using the grill again. Built up
grease which is allowed to remain encourages
flame and smoke development while cooking.
•Moist food should be dried, before placing on grill.
•Marinated food may cause more smoke to be
produced!
•During grilling, dripping fat may flare up briefly.
WARNING
TO AVOID RISK OF BURNS:
•Use proper utensils with long handles that allow the
chef plenty of clearance from the heat and potential
flare ups.
•DO NOT wear loose clothing while cooking.
•Never leave grill unattended while cooking.
•After each use, remove grease buildup from the grill
surfaces and the trays below the grill to avoid risk of
fire. Ventilation hoods should also be cleaned
periodically as needed and as recommended by the
User Manual as well as surrounding surfaces.
•Keep a fire extinguisher nearby and accessible.
Operation
1. Before turning on, make sure that there are ceramic
briquettes in the appliance and both grill grates are
correctly fitted. Turn on ventilation hood.
2. Press and turn the knob to the desired temperature
setting.
•The grill is electronically controlled with power
settings LOW through HIGH. There are no fixed
settings on the knobs.
•The two grill heating elements can be regulated
separately. This allows you to grill food with
different temperature requirements at the same
time, or you can use one area to grill and the other
to keep warm.
3. During the initial use, heat the grill for about 10 minutes
to eliminate manufacturing residues and smells.
4. For best results, allow the grill grates to preheat before
placing food on them.
CAUTION
Clean the grill after each use. Allow the appliance to cool
before cleaning.
Grilling Tips
•The grill should be preheated a minimum of 10 minutes
before cooking. Depending on browning preference
and the types of food being prepared, as much as 15
minutes of pre-heat time may be required.
•Soak wooden skewers in water a minimum 20 minutes
before placing on the grill.
•Prior to grilling, you can coat the food with heatresistant oil (e.g. peanut oil) or marinate it. Make sure
not to use too much oil/marinade, as otherwise it may
catch fire and generate thick smoke.
•Lay the food directly on the grill grates. DO NOT use
aluminum foil or grill trays.
•Cured meat, such as ham or smoked pork chops, is not
suitable for grilling. Unhealthy chemical compounds
may form.
•To prevent flare-ups, remove excess fat from foods
prior to grilling.
•DO NOT use cleaners on elements. Allow grease to
burn off the elements.
•To soak up fat on the grill plate, sprinkle coarse salt
onto the grilling surface after use.
Using the Electric Grill English | 27 |
Grill Cooking Recommendations
IMPORTANT:
•GRILL SHOULD NOT BE OPERATED WITHOUT PROPER VENTILATION.
•Foods with excessive fat or grease should not be prepared on an indoor grill. Grilling foods with high fat
content (certain types of ground beef, sausage, etc) increases the chances of smoke and flames.
FOOD*SETTING**
BEEF
Hamburgers, ¾'' (2 cm) (medium)HIGH12 – 14Ready to turn once juices appear on the surface.
T-Bone Steak, 1½'' (4 cm) (medium)HIGH20 – 22Remove excess fat.
Ribeye or Sirloin, 1" (3 cm) (medium)HIGH10 – 12Remove excess fat.
Kebabs, Steak (medium)HIGH24 – 28Turn occasionally.
PORK
Pork chops, ¾'' (2 cm)HIGH16 – 20Remove excess fat.
Sausages or BratwurstMED HIGH16 – 20Pierce before grilling.
Hot DogsHIGH6 – 8Place on grill horizontally.
POULTRY
Legs and thighsMED HIGH34 – 38Turn occasionally, remove excess skin.
Chicken wings, wholeMED HIGH18 – 22Turn occasionally.
Chicken breasts, ½'' (1 cm), bonelessMED HIGH20 – 24Pound to an even thickness before cooking.
Kebabs, chickenHIGH30 – 33Turn occasionally.
SEAFOOD
Fish steak, 2'' (6 cm)MED HIGH18 – 20Brush with oil before grilling.
Fish fillet, ¾'' (2 cm)MED HIGH16 – 20Brush with oil before grilling.
Shrimp skewersMED HIGH10 – 14Turn occasionally.
PRODUCE
Portobello mushroomsHIGH8 – 10Brush with oil.
Bell peppers, quarteredHIGH8 – 10Turn occasionally.
Eggplant, sliced, ½'' (1 cm)HIGH8 – 10Brush lightly with oil.
Tomatoes, halvesHIGH8 – 10Brush with oil.
Pineapple, slicedHIGH4 – 6—
Peaches, halvesHIGH4 – 6—
OTHER
Hamburger or hot dog bunsMED HIGH4 – 6Brush with butter.
Tofu, extra firm, slicedMED HIGH8 – 12Skewer for easier grilling.
* Level foods to a uniform thickness to ensure even cooking.
** The values in the settings table should only be regarded as guidelines, since more or less heat may be required
depending on the type and condition of the food.
COOK TIME
(MINUTES)
NOTES
Using the Electric Grill English | 28 |
Using the Oven
Oven Operation
Bake Rack Positions
Rack level positions in the oven are numbered like an
elevator. Number one level is the lowest and number five
level is at the top.
5
4
3
2
1
Figure 28: Oven Rack Positions
NOTE: Rack positions are general recommendations for
baking; however, if a recipe calls for a different rack
position than those given, then the recipe or package
directions should be followed.
Secondary Oven (48" Models)
Level BAKE Mode
#3-- Best used for most baked items.
#2-- When additional height is needed.
-- Pies are best baked on rack level #2 to make
certain the bottom of the crust is done without
over-browning the top.
Main Oven One Rack Baking
Level BAKE Mode
#3-- Best used for most baked items.
#2-- If the item is tall, such as an angel food cake.
-- Pies are best baked on rack level #2 to make
certain the bottom of the crust is done without
over-browning the top.
-- When large pieces of meat or poultry are
roasted, such as a prime rib of beef or a
turkey.
Main Oven Two Rack Baking
LevelsBAKE or CONVEC BAKE Mode
#2 & #4 Dual Fuel
#3 & #5 Gas
Main Oven Three Rack Baking
If three-rack baking is desired, the Convection Bake mode
is best.
-- Casserole dishes
Getting the Best Results
•Minimize opening the oven door(s).
•Use the rack position recommended by the recipe.
•Use the bakeware recommended in the recipe.
•Store the broiler pan(s) outside the oven. An extra pan
without food, affects the browning and cooking.
•The type of pan used affects the browning:
•For tender, golden brown crusts, use light
non-stick/anodized or shiny metal pans.
•For brown crisp crusts, use dark non-stick/
anodized or dark, dull metal pans or glass
bakeware. These may require lowering the bake
temperature 25°F (14°C).
Preheating the Oven
•Most cooking times in recipes are designed for a
preheated oven and require that the oven already be at
a certain temperature before cooking starts. Refer to
your recipe for preheating recommendations
•Preheating time depends on the temperature setting
and the number of racks in the oven.
Bakeware Type
•Metal bakeware (with or without a non-stick finish),
heat-proof glass, glass-ceramic, pottery, or other
utensils are suitable for the oven.
•Suitable cookie sheets have a small lip on one side.
Heavy sheets or those with more than one side may
affect the baking time.
Pan Placement
•Allow at least 1" (25.4 mm) of space between the pans
and the oven walls so heat can circulate around each
pan.
.
Using the Oven English | 29 |
•Stagger bakeware so that one is not directly above
another. Allow 1½'' (38 mm) above and below each
pan.
Figure 29: Dual Fuel Pan Placement
2. Set oven temperature using the Temperature Selector
Knob.
–The OVEN ON and PREHEATING lights turn on.
OVEN ON
–The oven is preheated to the set temperature when
the PREHEATING light cycles off the first time.
OVEN ON
–The OVEN ON light stays on during any active
cooking mode, and remains on until either of the
oven knobs is turned to the OFF position.
NOTE: The interior oven light is operated by a separate
switch that turns the light on and off, independent of any
control setting.
PREHEATING
PREHEATING
CLEANING
CLEANING
Extended Bake
Figure 30: Gas Pan Placement
Bake and Convection Bake
Set Bake or Convection Bake
1. Select BAKE mode or CONV BAKE mode using the
Mode Selector Knob.
This unique cooking mode is for assisting the user for
compliance to Sabbath principles.
1. Select EXTENDED BAKE mode using the Mode
Selector Knob.
2. Set oven temperature using the Temperature Selector
Knob.
•PREHEATING PHASE is the same as for other
BAKE modes. Once the oven is preheated to the
selected temperature, the twenty-two (22) minute
Extended Bake cycle begins.
•ACTIVE PHASE baking is as usual for nineteen
(19) minutes, except during the last two (2)
minutes, the OVEN ON and PREHEATING lights
blink slowly (on 3 sec. / off 3 sec. together) to serve
as a NOTICE for the final phase.
OVEN ON
•
ACCESS PHASE (oven idle):
Once the two lights stop blinking (both remaining
on), the final three (3) minutes allows the Sabbath
user access to the oven without effecting a change
in the operation of the range. Heating elements
remain off during this phase.
PREHEATING
CLEANING
Automatic operation of the cooling blowers
The cooling blowers activate after the oven reaches 300°F
(149°C). When the oven is turned off, the blowers remain
on until the oven temperature cools below 250°F (121°C).
Figure 31: Oven Controls (appearance will vary)
Using the Oven English | 30 |
Loading...
+ 67 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.