Thermador HDDW36FS Specification Sheet

HDDW36FS

36-INCH CHIMNEY WALL DRAWER HOOD

MASTERPIECE® SERIES

GENERAL PROPERTIES

Operating Mode Ducted

Maximum CFM 600 CFM

Sones N/A

Number of Speed Settings 3-Stage

Motor Location Integrated Motor In

Number of Lights 4

Bulb Type Halogen

Total Power of the Lamps (W) 20 W

Damper Included Ye s

Grease Filter Material Washable Synthetic

Grease Filter Type Multilayer Cassette

FEATURES & BENEFITS

- Unique sliding stainless canopy can be pushed back against the wall for increased head room

- 45% increase in capture area when hood is extended

- 600 CFM Integrated Blower included

- Three fan speeds plus 10 minute high-power operation mode

- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation

- Dimmer lighting–for those hours after a late meal

- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation

- Dishwasher-safe stainless-frame mesh lters

ACCESSORIES (OPTIONAL)

Stainless Steel Chimney Hood Extension - CHIMXHDD

For up to 11-foot ceiling applications. Extension replaces upper section of standard chimney extension. May require fabrication to reduce height.

TECHNICAL DETAILS

Watts (W) 610 W

Current (A) 15 A

Volts (V)

Frequency (Hz)

Plug Type

Conduit Length

DIMENSIONS & WEIGHT

Overall Appliance Dimensions (Width of Canopy Included) (HxWxD) (in)

Height of The Chimney (in) 23 7/8" - 39 5/8"

Accommodates Ceiling Heights 7 ft. 9 in. - 9 ft. 6 in.

Required Distance Above Cooktop / Range Cooking Surface

Diameter of Air Duct (in) Top 6"

Net Weight (lbs) 64 lbs

BLOWER OPTIONS

Remote Blower (Mounted to Roof or External Wall)

Inline Blower (Mounted Between Kitchen and External Wall)

Integrated Blower (Mounted in Hood) N/A

WARRANTY

Limited Warranty Parts and Labor 2 Year

Hood Body

120 V

60 Hz

120V-3 Prong

51"

26 3/4" - 42 1/2" x 35 1/2" x 17"

30" / 30"

N/A

Page 1 of 2

09 / 16

HDDW36FS

36-INCH CHIMNEY WALL DRAWER HOOD

MASTERPIECE® SERIES

HOOD DIMENSIONS

NOTE: Accommodates ceiling height of 7-ft. 9-in. to 9 ft. 6-in. An optional

Chimney Extension kit is available for ceilings up to 11-ft.

Installation Note: This product ships with two transport brackets to hold the movable canopy in place during shipping and installation. After installation, be sure to remove the brackets to operate the sliding drawer canopy.

OPTIONAL ACCESSORIES

CHIMNEY EXTENSION CHIMXHDD

Stainless steel chimney hood extension for up to 11-foot ceiling applications. Extension replaces upper section of standard chimney extension. May require fabrication to reduce height.

These warranties give you specific legal ri ghts and you may have other rights th at var y from state to state. Full warranty an d limited warrant y from d ate of in stallation. For co mplete warr anty details, ref er to you r Use & Ca re manu al, or as k your dealer.

Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model numbe r. Specifica tions are correct a t time of printing. Th ermador res erves the ri ght to change p roduct specif ications or d esign without not ice. Some mode ls are certi fied f or use in Canada. Thermador i s not res pons ible for product s that a re transported f rom the U.S. for u se in Ca nada.

Page 2 of 2

09 / 16