Thermador CEM304FS, CEM365FS User Manual
Specifications and Main Features
- Model Numbers: CES366FS, CES365FS, CES304FS, CETS366FS, CET304FS, CEM365FS, CEM304FS
- Power Supply: 240 V AC 60 Hz and 208 V AC 60 Hz
- Circuit Breaker ratings:
- CEM304FS - 40 amp 230 volts, 30 amp at 208 volts
- CET304FS - 40 amp 230 volts, 30 amp at 208 volts
- CES304FS - 4- amp 230 volts, 30 amp at 208 volts
- CEM365FS - 40 amp 230 volts, 40 amp at 208 volts
- CET366FS - 50 amp 230 volts, 40 amp at 208 volts
- CES366FS - 50 amp 230 volts, 40 amp at 208 volts
- CES365FS- 50 amps(230V) /40A(208V)
- Minimum Clearance Required:
- From both sidewalls and the rear wall: 2 inches (51 mm)
- From the bottom of cabinets above: Minimum clearance from the bottom of cabinets above must be 24 inches, or 24 inches with flame-retardant protection.
- Countertop Cut-out Requirements:
- Cutout dimensions For 30” Model: 28 3/4” to 28 7/8” wide (731mm - 734mm) x 19 7/8” to 20” deep (505mm - 508mm).
- Cutout dimensions For 36” model: 34 3/4” to 34 7/8” wide (883mm -886mm) x 19 7/8” to 20” deep (505mm-508mm).
- Required Equipment for Fitting:
- Screwdriver (Cross head)
- Marker
- Electric Drill with a 6 mm Diameter Drill Bit
- Jigsaw
- Measurement Tape
- Notes on Installation: The installation supervisor should wear protective gloves, sealing tape and clamps supplied.
Frequently Asked Questions
- What models are in this manual?
Models covered in this manual are CES366FS, CES365FS, CES304FS, CETS366FS, CET304FS, CEM365FS, and CEM304FS.
- What are the power supply requirements?
For the cooktop, either a power supply of 240 V AC, 60 Hz or 208 V AC, 60 Hz will suffice.
- What is the minimum clearance requirement above the cooktop?
Minimum clearance of 24 inches shall be observed above the cooktop or a reduction to 24 inches with suitable flame retardant is permitted.
- What tools are needed for installation?
Phillips head screwdriver, pencil, drill with a 1/4 inch bit, jigsaw, and tape measure will be required.
- What happens when the cooktop is installed inappropriately?
If the equipment is fitted inappropriately, it may cause injuries or damage or the equipment not working as expected.
- What is the cooktop operating procedures and maintenance?
There is a need to remove the stickers and use a cook top cleaning crème to scrub the surface of the cook top.
- In case my gadget requires repairs, is there a contact point which I can reach out to?
You also have the option of calling 1-800-735-4328 for Customer support to get guidance and direction to the nearest facility.
User Manual
Loading...