Thermador CEM304, CEM365, CEM456 Installation Instructions
Installation Instructions
OFF
HI
HI
HI
LO
LO
LO
OFF
HI
LO
HOT SURFACE
ON
MED MED
OFF
OFF
HI
LO
OFF
HI
LO
OFF
OFF
HI
HI
HI
LO
MED
OFF
HI
HI
LO
LO
HI
LO
LO
HOT SURFACE
LO
ON
OFF
OFF
LO
HI
HI
HI
LO
LO
OFF
HI
LO
MED
HI
HI
HI
LO
LO
LO
OFF
HI
LO
HOT SURFACE
MED MED
OFF
OFF
LO
ON
HI
HI
HI
LO
LO
OFF
HI
LO
Thermador Glass Ceramic Cooktops
Models: CEM304, CEM365, CEM456
Installation Instructions Models: CEM304, CEM365, CEM456
TABLE OF CONTENTS *
*NOTE: The blocked letters, such as A, sho wn below , r efer to illustrations on
Pages 2 & 4. Match these to the related text pages.
Overall Dimensions A ................................................................................................2
Power Supply B ............................................................................................................2
Cabinet Preparation and Clearances C ..............................................................2 , 3
Junction Box Location D ............................................................................................2
Countertop Cutout Dimensions E .........................................................................2
Installing the Cooktop F ............................................................................................4
Secure Cooktop to Countertop G .........................................................................4
Solid Surface Countertop Installs H ........................................................................4
Installation above a Single Oven I, J, K, and L.................................................4
Electrical Connection..................................................................................................5
IMPORTANT: Save these instructions for Local Electrical Inspector’s use.
INSTALLER: Please leave these Installation Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
READ AND SAVE THESE INSTRUCTIONS
OVERALL DIMENSIONS A
See Illustration A, Page 2. These dimensions are ov erall.
POWER SUPPLY B
ELECTRICAL POWER CONNECTION
FOR COOKTOP
Power Supply is dual rated: 240 Volts or 208 Volts, 3
wire, 60 Hz, with the following circuit breaker
requirements: Model CEM304 at 30 Amps; Model
CEM365 at 40 Amps or Model CEM456 at 50 Amps
JUNCTION BOX LOCATION D
Plan the installation of the unit so that the location of
the junction box is within 3 feet of the right rear of
the cooktop bottom. It must be accessible from
the front of the cabinet. (An exception to this
location would be for a cooktop installation over a
single electric oven In that situation, refer to Pages 4
and 5 and Figures I, J, K and L.
Install a junction box (not supplied), below the counter
top within 3 feet of flexible conduit (supplied) located
at the right rear corner of the cooktop rough-in bo x.
PAGE 1
Installation Instructions
Models: CEM304, CEM365, CEM456
CEM304 B 19-7/8" / (505 mm) 20" / (508 mm)
C28
-3
/4" / (731 mm) 28-7/8" / (734 mm)
CEM365 B 19-7/8" / (505 mm) 20" / (508 mm)
C34
-3
/4" / (883 mm) 34-7/8" / (886 mm)
CEM456 B 19-7/8" / (505 mm) 20" / (508 mm)
C43
-3
/4" / (1111 mm) 43-7/8" / (1114 mm)
PAGE 2
Loading...