Thales TTT-Slim II User Manual

Seite 1 / 10

User Manual TTT-Slim II

Dear Client,

Congratulations to your new turntable TTT-Slim II. This unit allows analogue playback on the
highest level because of compact design and careful engineering in every detail. Please follow
this manual carefully step by step for getting advantage of all possibilities offered by your new
turntable.

Please take your time to assemble, install and adjust the turntable and tonearm carefully. Your
dealer will be ready to assist you. The TTT-Slim II is a mechanical precision instrument. Please
beware of using high forces or hits to this unit.

The TTT-Slim II is usually delivered including our tonearm Thales Easy. For the tonearm, please
refer to its own user manual.

Seite 2 / 10

1) Unpacking TTT-Slim II

The packaging of this unit consists of several layers. Please open the main packaging, take out
the content and place it carefully on an even base, so it is ready for installation.

The top layer of the packaging holds the accessory-box. Inside are the user-manuals and all
tools needed for installation of turntable and tonearm.

Take off the accessory-box first and then toe top layer of the packaging.

Now the tonearm is visible; it is kept in position by a tonearm-fixation.

Hold back the tonearm-fixation with one hand by pressing it down gently.

Accessory-box

Tonearm-fixation

Seite 3 / 10

Now carefully remove the second layer of the packaging by sliding it upwards with the other
hand.

Make sure the tonearm-fixation is hold in position and not removed.

Now the main chassis of the turntable is visible.

Remove the tonearm-fixation by sliding it away along the arm-tube horizontally.