TEXAS INSTRUMENTS uA747C, uA747M Technical data

V
Max
查询UA747供应商
uA747C, uA747M
DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS009A – D971, FEBRUARY 1971 – REVISED OCTOBER 1990
No Frequency Compensation Required
Short-Circuit Protection
Offset-Voltage Null Capability
Wide Common-Mode and Differential
Voltage Ranges
No Latch-Up
Designed to Be Interchangeable With
Fairchild µA747C and µA747M
description
The uA747 is a dual general-purpose operational amplifier featuring offset-voltage null capability. Each half is electrically similar to uA741.
The high common-mode input voltage range and the absence of latch-up make this amplifier ideal for voltage-follower applications. The device is short-circuit protected and the internal frequency compensation ensures stability without external components. A low-value potentiometer may be connected between the offset null inputs to null out the offset voltage as shown in Figure 2.
The uA747C is characterized for operation from 0
°C to 70°C; the uA747M is characterized for
operation over the full military temperature range of –55
°C to 125°C.
OFFSET 1N2
OFFSET 2N2
OFFSET 1N2
NC
V
CC –
NC
OFFSET 2N2
D, J, N, OR W PACKAGE
(TOP VIEW)
IN –
1
IN +
2 3
V
uA747m ...FK PACKAGE
CC –
IN + IN –
4 5 6 7
(TOP VIEW)
OFFSET 1N1
14
1 V
13
OUT
12
NC
11
OUT
10
2 V
9
OFFSET 2N1
8
CC+
IN +
IN –NCOFFSET 1N1
3 2 1 20 19
4 5 6 7 8
910111213
1 V
18 17 16 15 14
NC
IN –
IN +
CC+
2 V
CC +
CC +
OUT NC NC NC OUT
symbol (each amplifier)
IN+
IN–
OFFSET N1 OFFSET N2
T
A
0°C
to
70°C
–55°C
to
125°C
The D package is available taped and reeled. Add the suffix R to the device type, (i.e., uA747CDR).
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
+
IO
AT 25°C
6 mV uA747CD uA747CN
5 mV uA747MJ uA747MW uA747MFK
SMALL OUTLINE
(D)
OUT
NC – No internal connection
The two positive supply terminals (1 V connected together internally.
AVAILABLE OPTIONS
PACKAGE
14-PIN 20-PIN
CERAMIC DIP
(J)
PLASTIC DIP
(N)
OFFSET 2N1
and 2 V
CC +
FLAT PACK
(W)
Copyright 1990, Texas Instruments Incorporated
CHIP CARRIER
(FK)
CC +
) are
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
1
uA747C, uA747M DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS009A – D971, FEBRUAR Y 1971 – REVISED OCT OBER 1990
schematic (each amplifier)
IN –
V
CC+
IN +
OFFSET N2
OFFSET N1
OUT
V
CC–
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
uA747C uA747M UNIT
Supply voltage, V Supply voltage, V Differential input voltage (see Note 2) ±30 ±30 V Input voltage any input (see Notes 1 and 3) ±15 ±15 V Voltage between any offset null terminal (N1/N2) and V Duration of output short circuit (see Note 4) unlimited unlimited Continuous total dissipation See Dissipation Rating Table Operating free-air temperature range 0 to 70 –55 to 125 °C Storage temperature range –65 to 150 –65 to 150 °C Case temperature for 60 seconds FK package 260 °C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J or W package 300 °C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D or N package 260 °C
NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between V
2. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or either power supply . For the uA747M only, the unlimited duration of the short circuit applies at (or below) 125°C case temperature or 75°C free-air temperature.
(see Note 1) 18 22 V
CC+
(see Note 1) –18 –22 V
CC–
CC–
±0.5 ±0.5 V
CC +
and V
CC –
.
DISSIPATION RATING TABLE
PACKAGE
D 800 mW 7.6 mW/°C 45°C 608 mW
FK 800 mW 11.0 mW/°C77°C 800 mW 275 mW
J 800 mW 11.0 mW/°C77°C 800 mW 275 mW
N 800 mW 9.2 mW/°C63°C 736 mW
W 800 mW 8.0 mW/°C 50°C 640 mW 200 mW
2
TA 25°C
POWER RATING
DERATING
FACTOR
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DERATE
ABOVE T
A
TA = 70°C
POWER RATING
TA = 125°C
POWER RATING
uA747C, uA747M
PARAMETER
TEST CONDITIONS
T
UNIT
VIOInput offset voltage
V
0
mV
IIOInput offset current
nA
IIBInput bias current
nA
V
V
V
V
A
V/mV
CMRR
V
V
dB
k
sensitivity
V
± 9 V to ± 15 V
V/V
I
y
No load
mA
P
No load
V
0
mW
V
20 mV
R
2 k
C
100 pF, See Figure 1
DUAL GENERAL-PURPOSE OPERATIONAL AMPLIFIERS
SLOS009A – D971, FEBRUAR Y 1971 – REVISED OCT OBER 1990
electrical characteristics at specified free-air temperature, V
A
p
V
IO(adj)
ICR
O(PP)
VD
r
i
r
o
C
i
SVS
I
OS
CC
D
Vo1/V
All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified.
Full range for uA747C is 0°C to 70°C and for uA747M is –55°C to 125°C. *On products compliant to MIL-STD-883, Class B, this parameter is not production tested. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback.
Offset voltage adjust range
p
p
Common-mode 25°C ±12 ±13 ±12 ±13 input voltage range Full range ±12 ±12
Maximum peak-to-peak RL 10 k Full range 24 24 output voltage swing RL= 2 k 25°C 20 26 20 26
Large-signal differential RL 2 k, 25°C 25 200 50 200 voltage amplification VO = ± 10 V Full range 15 25 Input resistance 25°C 0.3 2 0.3* 2 M Output resistance See Note 5 25°C 75 75 Input capacitance 25°C 1.4 1.4 pF Common-mode
rejection ratio Supply-voltage
(VIO/ VCC) Short-circuit
output current Supply current
(each amplifier) Power dissipation
(each amplifier) Channel separation 25°C 120 120 0 dB
o2
=
O
RL= 10 k 25°C 24 28 24 28
RL 2 k Full range 20 20
=
IC
ICR
=
CC
,
=
O
25°C 1 6 1 5
Full range 7.5 6
25°C ±15 ±15 mV 25°C 20 200 20 200
Full range 300 500
25°C 80 500 80 500
Full range 800 1500
25°C 70 90 70 90
Full range 70 70
25°C
Full range
25°C ±25 ±40 ±25 ±40 mA 25°C 1.7 2.8 1.7 2.8
Full range 3.3 3.3
25°C 50 85 50 85
Full range 100 100
MIN TYP MAX MIN TYP MAX
= ±15 V
CC±
uA747C uA747M
30 150 30 150
150 150
µ
operating characteristics, V
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
t
Rise time
r
Overshoot factor
SR Slew rate at unity gain VI = 10 mV, RL = 2 k, CL = 100 pF, See Figure 1 0.5 V/µs
= ± 15 V, TA = 25°C
CC ±
=
I
,
=
L
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
,
p
=
L
0.3 µs 5%
3
Loading...
+ 5 hidden pages