How it Works
Texas Instruments
Loading...
TLV2262AMJGB
Datasheet
51 pgs837.14 Kb0

Texas Instruments TLV2264AQDR, TLV2264AMWB, TLV2264AQD, TLV2264AMJB, TLV2264AMFKB Datasheet

...
TLV226x, TLV226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
D
Output Swing Includes Both Supply Rails
D
D
Low Input Bias Current ...1 pA Typ
D
Fully Specified for Both Single-Supply and Split-Supply Operation
D
Low Power . . . 500 µA Max
D
Common-Mode Input Voltage Range Includes Negative Rail
description
The TL V2262 and TLV2264 are dual and quad low voltage operational amplifiers from Texas Instru­ments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single or split supply applications. The TLV226x family offers a compromise between the micro­power TLV225x and the ac performance of the TLC227x. It has low supply current for battery­powered applications, while still having adequate ac performance for applications that demand it. This family is fully characterized at 3 V and 5 V and is optimized for low-voltage applications. The noise performance has been dramatically im­proved over previous generations of CMOS amplifiers. Figure 1 depicts the low level of noise voltage for this CMOS amplifier, which has only 200 µA (typ) of supply current per amplifier.
The TLV226x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micro­power dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV226xA family is available and has a maximum input offset voltage of 950 µV.
D
Low Input Offset Voltage
950 µV Max at TA = 25°C (TLV226xA)
D
Wide Supply Voltage Range
2.7 V to 8 V
D
Macromodel Included
D
Available in Q-Temp Automotive
HighRel Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
4
VDD = 3 V
3.5
3
2.5
2
1.5
1
– High-Level Output Voltage – V
0.5
OH
V
0
0 500 1000
TA = 125°C
TA = 25°C
TA = 85°C
TA = –40°C
| IOH | – High-Level Output Current – µA
Figure 1
1500 2000
TA = –55°C
The TL V2262/4 also makes great upgrades to the TL V2332/4 in standard designs. They offer increased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If your design requires single amplifiers, please see the TL V221 1/21/31 family . These devices are single rail-to-rail operational amplifiers in the SOT -23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Advanced LinCMOS is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1999, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
1
TLV226x, TLV226xA
40°C to 85°C
µ
40°C to 125°C
µ
µ
µ
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262 AVAILABLE OPTIONS
PACKAGED DEVICES
T
A
0°C to 70°C 2.5 mV TLV2262CD — — TLV2262CP TLV2262CPWLE —
°
–
°
–
–55°C to 125°C
†
The D packages are available taped and reeled. Add R suffix to device type (e.g., TL V2262CDR).
‡
The PW package is available only left-end taped and reeled.
§
Chips are tested at 25°C.
T
A
–40°C to 950 µV TLV2264AID — — TLV2264AIN TLV2264AIPWLE —
85°C
–40°C to 950 µV TLV2264AQD — — — — —
125°C
–55°C to
125°C
†
The D packages are available taped and reeled. Add R suffix to device type (e.g., TL V2262IDR).
‡
The PW package is available only left-end taped and reeled.
§
Chips are tested at 25°C.
°
°
VIOmax AT 25°C
2.5 mV
2.5 mV 950 µV
2.5 mV
VIOmax AT 25°C
950 µV TLV2262AID — — TLV2262AIP TLV2262AIPWLE —
2.5 mV 950 µV TLV2262AQD — — — — —
2.5 mV 950 µV
2.5 mV
SMALL
OUTLINE
TLV2264ID — — TLV2264IN — —
TLV2264QD — — — — —
SMALL
OUTLINE
(D)
TLV2262ID — — TLV2262IP — —
TLV2262QD — — — — —
— —
CHIP
(D)
— —
CARRIER
TLV2264AMFK
TLV2264MFK
CHIP
CARRIER
(FK)
TLV2262AMFK TLV2262MFK
TLV2264 AVAILABLE OPTIONS
(FK)
CERAMIC
DIP
(JG)
TLV2262AMJG
TLV2262MJG
PACKAGED DEVICES
CERAMIC
DIP
(J)
TLV2264AMJ TLV2264MJ
PLASTIC
PLASTIC
DIP
(N)
— —
DIP
(P)
— —
TSSOP
(PW)
— —
TSSOP
(PW)
— —
FLATPACK
TLV2262AMU TLV2262MU
CERAMIC
FLATPACK
TLV2264AMW TLV2264MW
CERAMIC
(U)
(W)
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV226x, TLV226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
V
V
V
TLV2262C, TLV2262AC
TLV2262I, TLV2262AI
TLV2262Q, TLV2262AQ
D, P, OR PW PACKAGE
(TOP VIEW)
1OUT
1IN– 1IN+
/GND
DD–
TLV2262M, TLV2262AM
JG PACKAGE
(TOP VIEW)
1OUT
1IN–
1IN+
/GND
DD–
TLV2662M, TLV2262AM
U PACKAGE
(TOP VIEW)
NC
1OUT
1IN –
1IN +
/GND
CC–
1 2 3 4
1 2 3 4 5
TLV2264I, TLV2264AI
TLV2264Q, TLV2264AQ
D, N, OR PW PACKAGE
(TOP VIEW)
14
1 2 3 4
8 7 6 5
V
DD+
2OUT 2IN– 2IN+
1OUT
1IN– 1IN+
V
2IN+ 2IN–
2OUT
V
8
DD+
2OUT
7
2IN–
6
2IN+
5
1OUT
1IN– 1IN+
V
2IN+ 2IN–
10
9 8 7 6
NC V
CC
2OUT 2IN – 2IN +
+
2OUT
1 2 3 4
DD+
5 6 7
TLV2264M, TLV2264AM
J OR W PACKAGE
(TOP VIEW)
1 2 3 4
DD+
5 6 7
TLV2264M, TLV2264AM
FK PACKAGE
(TOP VIEW)
13 12 11 10
14 13 12 11 10
9 8
9 8
4OUT 4IN– 4IN+ V
DD–
3IN+ 3IN– 3OUT
4OUT 4IN– 4IN+ V
DD–
3IN+ 3IN– 3OUT
/GND
/GND
NC
1IN–
NC
1IN+
NC
TLV2262M, TLV2262AM
FK PACKAGE
(TOP VIEW)
DD+
1OUT
/GND
DD–
V
NC
NC
V
2IN+
NC
18 17 16 15 14
NC
NC
3 2 1 20 19
4 5 6 7 8
910111213
NC
NC 2OUT NC 2IN– NC
1IN+
V
CC+
2IN+
NC
NC
1OUT
NC
4OUT
1IN –
3212019
4 5 6 7 8
910111213
NC
2IN –
2OUT
3OUT
4IN –
18 17 16 15 14
3IN –
4IN+ NC V
CC–
NC 3IN+
/GND
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
T l
R l
D
7 11
94
4
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
equivalent schematic (each amplifier)
Q3 Q6 Q9 Q12 Q14 Q16
IN+
IN–
Q4Q1
R6
R5
V
DD+
C1
TLV226x, TLV226xA
OPERA TIONAL AMPLIFIERS
SLOS186A – FEBRUAR Y 1997 – REVISED JULY 1999
Advanced LinCMOS RAIL-TO-RAIL
emp ate
e ease
ate:
OUT
Q17Q15Q13
– –
•
Q2 Q5 Q7 Q8 Q10 Q11
R3 R4 R1 R2
V
DD–/GND
ACTUAL DEVICE COMPONENT COUNT
COMPONENT TLV2252 TLV2254
Transistors 38 76 Resistors 28 54 Diodes 9 18 Capacitors 3 6
†
Includes both amplifiers and all ESD, bias, and trim circuitry
†
D1
TLV226x, TLV226xA
PACKAGE
A
A
UNIT
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VDD (see Note 1) 8 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID (see Note 2) ±V Input voltage range, V
(any input, see Note 1) V
I
Input current, II (each input) ±5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current into V Total current out of V
±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DD+
±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DD–
Duration of short-circuit current (at or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, T
Storage temperature range, T
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P, and PW packages 260°C. . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to V
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows when input is brought below V
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded.
DD–
– 0.3 V.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
: I suffix –40°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
DD–
Q suffix –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M suffix –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FK, J, JG, U, AND W packages 300°C. .
.
DD –
–0.3 V to V
DD+
†
DD
DISSIPATION RATING TABLE
T
≤ 25°C DERATING FACTOR T
POWER RATING ABOVE TA = 25°C
D–8 725 mW 5.8 mW/°C 377 mW 145 mW
D–14 950 mW 7.6 mW/°C 494 mW 190 mW
FK 1375 mW 11.0 mW/°C 715 mW 275 mW
J 1375 mW 1 1.0 mW/°C 715 mW 275 mW
JG 1050 mW 8.4 mW/°C — 210 mW
N 1150 mW 9.2 mW/°C 598 mW — P 1000 mW 8.0 mW/°C 520 mW 200 mW
PW–8 525 mW 4.2 mW/°C 273 mW 105 mW
PW–14 700 mW 5.6 mW/°C 364 mW —
U 700 mW 5.5 mW/°C — 150 mW
W 700 mW 5.5 mW/°C 370 mW 150 mW
recommended operating conditions
I SUFFIX Q SUFFIX M SUFFIX
MIN MAX MIN MAX MIN MAX
Supply voltage, V Input voltage range, V Common-mode input voltage, V Operating free-air temperature, T
NOTE 1: All voltage values, except differential voltages, are with respect to V
DD±
I
(see Note 1)
IC
A
2.7 8 2.7 8 2.7 8 V
V
DD–VDD+
V
DD–VDD+ –40 85 –40 125 –55 125 °C
= 85°C T
POWER RATINGAPOWER RATING
–1.3 V –1.3 V
.
DD –
DD–VDD+ DD–VDD+
–1.3 V –1.3 V
= 125°C
DD–VDD+ DD–VDD+
–1.3 V –1.3 V
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
VIOIn ut offset voltage
µV
IIOIn ut offset current
A
IIBIn ut bias current
A
V
ICR
R
S
|V
IO
mV
V
High-level output
I
OH
100 µA
voltage
I
OH
400 µA
Low-level output
V
IC
I
OL
500 µA
voltage
V
IC
I
OL
m
A
L
diff
l
V
R
kΩ
‡
voltage am lification
V
O
V
CMRR
IC
dB
k
SVR
ygj
DD
dB
IDDSu ly current
V
O
No load
µA
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262I electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
A
p
α
V
V
A
r
r
c
z
† ‡
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
Temperature coefficient
VIO
of input offset voltage Input offset voltage
long-term drift (see Note 4)
p
p
Common-mode input voltage range
OH
OL
VD
i(d)
i(c)
i(c)
o
Full range is – 40°C to 85°C. Referenced to 1.5 V
arge-signal
Differential input resistance
Common-mode input resistance
Common-mode input capacitance
Closed-loop output impedance
Common-mode VIC = 0 to 1.7 V, rejection ratio
Supply voltage rejection VDD = 2.7 V to 8 V, ratio (∆VDD/∆VIO)
pp
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV .
p
p
erentia
p
V VO = 0, RS = 50 Ω
IOH = –20 µA 25°C 2.99 2.99
VIC = 1.5 V, IOL = 50 µA 25°C 10 10
f = 10 kHz, P package 25°C 8 8 pF
f = 100 kHz, AV = 10 25°C 270 270
VO = 1.5 V, RS = 50 Ω
VIC = VDD/2, No load
= ±1.5 V , VIC = 0,
DD±
= 50 Ω,
= –
= –
= 1.5 V,
= 1.5 V,
= 1.5 V,
IC
= 1 V to 2
= 1.5 V,
| ≤5
=
= 1
= 50
L
RL = 1 MΩ
25°C 300 2500 300 950
Full range 3000 1500
25°C
to 85°C
25°C 0.003 0.003 µV/mo
25°C 0.5 0.5
Full range 150 150
25°C 1 1
Full range 150 150
25°C
Full range
25°C 2.85 2.85
Full range 2.825 2.825 V
25°C 2.7 2.7
Full range 2.65 2.65
25°C 100 100
Full range 150 150 mV
25°C 200 200
Full range 300 300
25°C 60 100 60 100
Full range 30 30 V/mV
‡
25°C 100 100 25°C 10
25°C 10
25°C 65 75 65 77
Full range 60 60
25°C 80 95 80 100
Full range 80 80
25°C 400 500 400 500
Full range 500 500
TLV2262I TLV2262AI
MIN TYP MAX MIN TYP MAX
2 2 µV/°C
0
1.7
–0.3
to
to
2
2.2
0
to
12
12
1.7
0
–0.3
to
to
2
2.2
0
to
12
10
12
10
p
p
Ω
Ω
Ω
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
V
1.1 V to 1.9 V ‡
R
50 kΩ
‡
C
L
100 F
‡
0.3
0.3
V
q V/√H
V
equivalent input
V
THD
N
f
kHz
25°C
,
L
,
25°C
0.67
0.67
MH
B
output-swing
O(PP)
,
V
,
25°C
395
395
kH
,
A
V
1,
To 0.1%°5.6
5.6
tsSettling time
,
25°Cµs
L
To 0.01%
12.5
12.5
‡
L,L
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262I operating characteristics at specified free-air temperature, VDD = 3 V
TLV2262I TLV2262AI
MIN TYP MAX MIN TYP MAX
0.35 0.55 0.35 0.55
0.03% 0.03%
0.05% 0.05%
SR Slew rate at unity gain
n
N(PP)
I
n
OM
φ
m
†
Full range is – 40°C to 85°C.
‡
Referenced to 1.5 V
Equivalent input noise voltage
Peak-to-peak
noise voltage Equivalent input noise
current
Total harmonic
+
distortion plus noise
Gain-bandwidth product
Maximum
p
bandwidth
Phase margin at unity gain
Gain margin
p
A
=
O
=
p
f = 10 Hz 25°C 43 43 f = 1 kHz
f = 0.1 Hz to 1 Hz 25°C 0.6 0.6 f = 0.1 Hz to 10 Hz 25°C 1 1
VO = 0.5 V to 2.5 V,
= 20
RL = 50 k٠f = 1 kHz, RL = 50 kه,
CL = 100 pF
V
= 1 V, A
RL = 50 kه,
A
= –1 Step = 1 V to 2 V, RL = 50 kΩ‡, CL = 100 pF
RL = 50 kه, CL = 100 pF
,
=
L
,
‡
‡
‡
AV = 1 AV = 10
= 1,
CL = 100 pF
25°C
,
Full
range
25°C 12 12
25°C 0.6 0.6
°
°
°
‡
25°C 55° 55° 25°C 11 11 dB
V/µs
n
µ
fA/√Hz
z
z
z
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
7
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
VIOInput offset voltage
V
2
2µV/°C
IIOInput offset current
pA
IIBInput bias current
pA
V
|V
R
Ω
V
g
I
100 µA
I
400 µA
V
I
500 µA
V
I
m
A
L
diff
l
V
2.5 V
R
50 kΩ
‡
VD
voltage am lification
V
O
V
CMRR
j
IC
dB
k
ygj
DD
dB
IDDSupply current
V
No load
A
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
A
p
α
V
V
A
r
r
c
z
† ‡
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
Temperature coefficient 25°C
VIO
of input offset voltage to 85°C Input offset voltage
long-term drift (see Note 4)
p
p
Common-mode input
ICR
voltage range
High-level output voltage
OH
Low-level output voltage
OL
VD
i(d)
i(c)
i(c)
o
SVR
Full range is – 40°C to 85°C. Referenced to 2.5 V
arge-signal
Differential input resistance
Common-mode input resistance
Common-mode input capacitance
Closed-loop output impedance
Common-mode rejection VIC = 0 to 2.7 V, ratio
Supply voltage rejection VDD = 4.4 V to 8 V, ratio (∆VDD/∆VIO)
pp
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV .
erentia
p
V
= ±2.5 V , VIC = 0,
DD±
VO = 0, RS = 50 Ω
| ≤5 mV,
IO
IOH = –20 µA 25°C 4.99 4.99
= –
OH
= –
OH
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
= 2.5 V,
IC
= 2.5 V,
IC
,
=
IC
= 1 V to 4
f = 10 kHz, P package 25°C 8 8 pF
f = 100 kHz, AV = 10 25°C 240 240
VO = 2.5 V, RS = 50 Ω
VIC = VDD/2, No load
= 2.5 V,
O
= 50
S
=
OL
= 1
OL
=
L
RL = 1 MΩ
25°C 300 2500 300 950
Full range 3000 1500
25°C 0.003 0.003 µV/mo
25°C 0.5 0.5
Full range 150 150
25°C 1 1
Full range 150 150
25°C
Full range
25°C 4.85 4.94 4.85 4.94
Full range 4.82 4.82
25°C 4.7 4.85 4.7 4.85
Full range 4.6 4.6
25°C 0.09 0.15 0.09 0.15
Full range 0.15 0.15
25°C 0.2 0.3 0.2 0.3
Full range 0.3 0.3
25°C 80 170 80 170
Full range 55 55
‡
25°C 550 550 25°C 10
25°C 10
25°C 70 83 70 83
Full range 70 70
25°C 80 95 80 95
Full range 80 80
25°C 400 500 400 500
Full range 500 500
TLV2262I TLV2262AI
MIN TYP MAX MIN TYP MAX
0 –0.3 0 –0.3
to to to to
4 4.2 4 4.2 0 0
to to
3.5 3.5
12
12
10
10
12
12
µ
°
p
p
V
V
V/mV
Ω
Ω
Ω
µ
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
Slew rate at unit
V
1.5 V to 3.5 V ‡
R
50 kΩ
‡
gain
C
L
100 F
‡
0.3
0.3
V
q V/√H
V
equivalent input
V
THD
N
distortion plus
f
kHz
25°C
,
L
,
25°C
0.71
0.71
MH
B
O(PP)
,
V
,
25°C
185
185
kH
,
A
V
1,
To 0.1%°6.4
6.4
tsSettling time
,
25°Cµs
L
To 0.01%
14.1
14.1
‡
L,L
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262I operating characteristics at specified free-air temperature, VDD = 5 V
TLV2262I TLV2262AI
MIN TYP MAX MIN TYP MAX
0.35 0.55 0.35 0.55
0.017% 0.017%
0.03% 0.03%
SR
n
N(PP)
I
n
OM
φ
m
†
Full range is – 40°C to 85°C.
‡
Referenced to 2.5 V
Equivalent input noise voltage
Peak-to-peak
noise voltage Equivalent input
noise current Total harmonic
+
noise Gain-bandwidth
product Maximum output- V
swing bandwidth
Phase margin at unity gain
Gain margin
p
A
y
p
=
O
=
p
f = 10 Hz 25°C 40 40 f = 1 kHz
f = 0.1 Hz to 1 Hz 25°C 0.7 0.7 f = 0.1 Hz to 10 Hz 25°C 1.3 1.3
VO = 0.5 V to 2.5 V,
= 20
RL = 50 k٠f = 50 kHz, RL = 50 kه,
CL = 100 pF
= 2 V, A
RL = 50 kه, A
= –1
Step = 0.5 V to 2.5 V,
RL = 50 kه, CL = 100 pF
RL = 50 kه, CL = 100 pF
,
=
L
,
‡
‡
‡
AV = 1 AV = 10
= 1,
CL = 100 pF
25°C
,
Full
range
25°C 12 12
25°C 0.6 0.6
°
°
°
‡
25°C 56° 56° 25°C 11 11 dB
V/µs
n
µ
fA/√Hz
z
z
z
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
9
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
VIOInput offset voltage
V
2
2µV/°C
V RS= 50 Ω
IIOInput offset current
pA
IIBInput bias current
pA
V
R
|V
mV
V
g
High-l
t
I
100 µA
voltage
I
400 µA
V
I
500 µA
V
I
m
A
L
diff
l
R
50 kΩ
‡
VD
voltage am lification
V
O
V
CMRR
dB
k
SVR
dB
I
DD
y
V
O
No load
mA
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2264I electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
A
p
α
V
V
A
r
r
c
z
† ‡
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
Temperature coefficient 25°C
VIO
of input offset voltage Input offset voltage
long-term drift (see Note 4)
p
p
Common-mode input
ICR
voltage range
OH
OL
VD
i(d)
i(c)
i(c)
o
Full range is – 40°C to 85°C. Referenced to 1.5 V
evel outpu
Low-level output voltage
arge-signal
Differential input resistance
Common-mode input resistance
Common-mode input capacitance
Closed-loop output impedance
Common-mode rejection ratio
Supply voltage rejection ratio (∆VDD/∆VIO)
Supply current (four amplifiers)
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV .
erentia
p
= ±1.5 V,
DD±
VIC = 0, VO = 0,
= 50 Ω,
S
IOH = –20 µA 25°C 2.99 2.99
= –
OH
= –
OH
VIC = 1.5 V, IOL = 50 µA 25°C 10 10
= 1.5 V,
IC
= 1.5 V,
IC
VIC = 1.5 V,
= 1 to 2
f = 10 kHz, N package 25°C 8 8 pF
f = 100 kHz, AV = 10 25°C 270 270 VIC = 0 to 1.7 V, 25°C 65 75 65 77
VO = 1.5 V, VDD = 2.7 V to 8 V, 25°C 80 95 80 100
VIC = VDD/2, No load Full range 80 80
= 1.5 V,
| ≤5
IO
=
OL
= 1
OL
=
L
RL = 1 MΩ
RS = 50 Ω Full range 60 60
25°C 300 2500 300 950
Full range 3000 1500
to 85°C
25°C 0.003 0.003 µV/mo
25°C 0.5 0.5
Full range 150 150
25°C 1 1
Full range 150 150
25°C
Full range
25°C 2.85 2.85
Full range 2.825 2.825 V
25°C 2.7 2.7
Full range 2.65 2.65
25°C 100 100
Full range 150 150 mV
25°C 200 200
Full range 300 300
25°C 60 100 60 100
Full range 30 30
‡
25°C 100 100 25°C 10
25°C 10
25°C 0.8 1 0.8 1
Full range 1 1
TLV2264I TLV2264AI
MIN TYP MAX MIN TYP MAX
0 –0.3 0 –0.3
to to to to
2 2.2 2 2.2 0 0
to to
1.7 1.7
12
12
10
10
12
12
µ
°
p
p
V/mV
Ω
Ω
Ω
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
25°C
0.35
0.55
0.35
0.55
Slew rate at unit
V
‡
R
kΩ
‡
gain
C
L
100 F
‡
0.3
0.3
V
q V/√H
V
equivalent input
V
THD
N
distortion plus
f
kHz
25°C
,
L
,
25°C
0.67
0.67
MH
B
output-swing
O(PP)
,
V
,
25°C
395
395
kH
,
A
V
1,
To 0.1%
5.6
5.6
tsSettling time
,
25°Cµs
L
To 0.01%
12.5
12.5
‡
L,L
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2264I operating characteristics at specified free-air temperature, VDD = 3 V
TLV2264I TLV2264AI
MIN TYP MAX MIN TYP MAX
0.03% 0.03%
0.05% 0.05%
SR
n
N(PP)
I
n
OM
φ
m
†
Full range is – 40°C to 85°C.
‡
Referenced to 1.5 V
Equivalent input noise voltage
Peak-to-peak
noise voltage Equivalent input
noise current Total harmonic
+
noise Gain-bandwidth
product Maximum
bandwidth
Phase margin at unity gain
Gain margin
p
p
A
y
= 0.7 V to 1.7 V,
O
=
p
f = 10 Hz 25°C 43 43 f = 1 kHz
p
f = 0.1 Hz to 1 Hz 25°C 0.6 0.6 f = 0.1 Hz to 10 Hz
VO = 0.5 V to 2.5 V,
= 20
RL = 50 k٠f = 1 kHz, RL = 50 kه,
CL = 100 pF
V RL = 50 kΩ
A Step = 1 V to 2 V, RL = 50 kΩ CL = 100 pF
RL = 50 kه, CL = 100 pF
,
= 1 V, A
= –1
‡
‡
‡,
‡,
‡
= 50
L
AV = 1 AV = 10
= 1,
CL = 100 pF
,
Full
range
25°C 12 12
25°C 1 1
25°C 0.6 0.6
°
°
°
‡
°
25°C 55° 55° 25°C 11 11 dB
V/µs
n
µ
fA/√Hz
z
z
z
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
11
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
VIOInput offset voltage
V
2
2µV/°C
V R
S
Ω
IIOInput offset current
pA
IIBInput bias current
pA
V
|V
R
Ω
V
g
High-l
t
I
100 µA
voltage
I
400 µA
L
t
V
I
500 µA
voltage
V
I
A
L
diff
l
V
2.5 V
R
50 kΩ
‡
VD
voltage am lification
V
O
V
CMRR
j
IC O
dB
k
ygj
DD
dB
I
DD
y
V
O
No load
mA
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2264I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
A
p
α
V
V
A
r
r
c
z
† ‡
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
Temperature coefficient 25°C
VIO
of input offset voltage Input offset voltage
long-term drift (see Note 4)
p
p
Common-mode input
ICR
voltage range
OH
OL
VD
i(d)
i(c)
i(c)
o
SVR
Full range is – 40°C to 85°C. Referenced to 2.5 V
evel outpu
ow-level outpu
arge-signal
Differential input resistance
Common-mode input resistance
Common-mode input capacitance
Closed-loop output impedance
Common-mode rejection VIC = 0 to 2.7 V, VO = 2.5 V, ratio
Supply voltage rejection VDD = 4.4 V to 8 V, ratio (∆VDD/∆VIO)
Supply current (four amplifiers)
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV .
erentia
p
= ±2.5 V,
DD±
VIC = 0, VO = 0,
=
= 50
| ≤5 mV,
IO
IOH = –20 µA 25°C 4.99 4.99
= –
OH
= –
OH
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
= 2.5 V,
IC
= 2.5 V,
IC
,
=
IC
= 1 V to 4
f = 10 kHz, N package 25°C 8 8 pF
f = 100 kHz, AV = 10 25°C 240 240 Ω
RS = 50 Ω
VIC = VDD/2, No load
= 2.5 V,
= 50
S
=
OL
= 1
OL
=
L
RL = 1 MΩ
m
25°C 300 2500 300 950
Full range 3000 1500
to 85°C
25°C 0.003 0.003 µV/mo
25°C 0.5 0.5
Full range 150 150
25°C 1 1
Full range 150 150
25°C
Full range
25°C 4.85 4.94 4.85 4.94
Full range 4.82 4.82 V
25°C 4.7 4.85 4.7 4.85
Full range 4.6 4.6
25°C 0.09 0.15 0.09 0.15
Full range 0.15 0.15 V
25°C 0.2 0.3 0.2 0.3
Full range 0.3 0.3
25°C 80 170 80 170
Full range 55 55
‡
25°C 550 550 25°C 10
25°C 10
25°C 70 83 70 83
Full range 70 70
25°C 80 95 80 95
Full range 80 80
25°C 0.8 1 0.8 1
Full range 1 1
TLV2264I TLV2264AI
MIN TYP MAX MIN TYP MAX
0 –0.3 0 –0.3
to to to to
4 4.2 4 4.2 0 0
to to
3.5 3.5
12
12
10
10
12
12
µ
°
p
p
V/mV
Ω
Ω
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV226x, TLV226xA
PARAMETER
TEST CONDITIONS
T
†
UNIT
25°C
0.35
0.55
0.35
0.55
Slew rate at unit
V
‡
R
kΩ
‡
gain
C
L
100 F
‡
0.3
0.3
V
q V/√H
V
equivalent input
V
THD
N
distortion plus
f
kHz
25°C
,
L
,
25°C
0.71
0.71
MH
B
O(PP)
,
V
,
25°C
185
185
kH
,
A
V
1,
To 0.1%
6.4
6.4
tsSettling time
,
25°Cµs
L
To 0.01%
14.1
14.1
‡
L,L
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2264I operating characteristics at specified free-air temperature, VDD = 5 V
TLV2264I TLV2264AI
MIN TYP MAX MIN TYP MAX
0.017% 0.017%
0.03% 0.03%
SR
n
N(PP)
I
n
OM
φ
m
†
Full range is – 40°C to 85°C.
‡
Referenced to 2.5 V
Equivalent input noise voltage
Peak-to-peak
noise voltage Equivalent input
noise current Total harmonicpVO = 0.5 V to 2.5 V,
+
noise Gain-bandwidth
product Maximum output- V
swing bandwidth
Phase margin at unity gain
Gain margin
A
y
= 1.4 V to 2.6 V,
O
=
p
f = 10 Hz 25°C 40 40 f = 1 kHz
f = 0.1 Hz to 1 Hz 25°C 0.7 0.7
p
f = 0.1 Hz to 10 Hz
= 20
RL = 50 k٠f = 50 kHz, RL = 50 kه,
CL = 100 pF
RL = 50 kه, A
Step = 0.5 V to 2.5 V,
RL = 50 kه, CL = 100 pF
RL = 50 kه, CL = 100 pF
,
‡
= 2 V, A
= –1
‡
‡
= 50
L
AV = 1 AV = 10
= 1,
CL = 100 pF
,
Full
range
25°C 12 12
25°C 1.3 1.3
25°C 0.6 0.6
°
°
°
‡
°
25°C 56° 56° 25°C 11 11 dB
V/µs
n
µ
fA/√Hz
z
z
z
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
13
TLV226x, TLV226xA
†
A
VIOIn ut offset voltage
µV
2
2µV/°C
IIOIn ut offset current
A
IIBIn ut bias current
A
V
ICR
R
S
|V
IO
mV
V
High-level output
I
OH
100 µA
voltage
I
OH
400 µA
Low-level output
V
IC
I
OL
500 µA
voltage
V
IC
I
OL
m
A
L
diff
l
V
1.5 V
R
50 kΩ
‡
voltage am lification
V
O
V
CMRR
IC
dB
k
SVR
ygj
DD
dB
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262Q and TLV2262M electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted)
TLV2262Q,
PARAMETER TEST CONDITIONS
p
α
V
V
A
r
r
c
z
† ‡
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
Temperature coefficient 25°C
VIO
of input offset voltage to 125°C Input offset voltage
long-term drift (see Note 4)
p
p
Common-mode input voltage range
OH
OL
VD
i(d)
i(c)
i(c)
o
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part. Referenced to 1.5 V
arge-signal
Differential input resistance
Common-mode input resistance
Common-mode input capacitance
Closed-loop output impedance
Common-mode VIC = 0 to 1.7 V, rejection ratio
Supply voltage rejection VDD = 2.7 V to 8 V, ratio (∆VDD/∆VIO)
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV .
p
p
erentia
p
V
= ±1.5 V , VIC = 0,
DD±
VO = 0, RS = 50 Ω
= 50 Ω,
IOH = –20 µA 25°C 2.99 2.99
= –
= –
VIC = 1.5 V, IOL = 50 µA 25°C 10 10
= 1.5 V,
= 1.5 V,
,
=
IC
= 1 V to 2
f = 10 kHz, P package 25°C 8 8 pF
f = 100 kHz, AV = 10 25°C 270 270
VO = 1.5 V, RS = 50 Ω
VIC = VDD/2, No load
| ≤5
=
= 1
=
L
RL = 1 MΩ
‡
T
25°C 300 2500 300 950
Full range 3000 1500
25°C 0.003 0.003 µV/mo
25°C 0.5 0.5
125°C 500 500
25°C 1 1
125°C 500 500
25°C
Full range
25°C 2.85 2.85
Full range 2.82 2.82 V
25°C 2.7 2.7
Full range 2.55 2.55
25°C 100 150 100 150
Full range 165 165 mV
25°C 200 300 200 300
Full range 300 300
25°C 60 100 60 100
Full range 25 25 V/mV
25°C 100 100 25°C 10
25°C 10
25°C 65 75 65 77
Full range 60 60
25°C 80 95 80 100
Full range 80 80
TLV2262M
MIN TYP MAX MIN TYP MAX
0 –0.3 0 –0.3
to to to to
2 2.2 2 2.2 0 0
to to
1.7 1.7
12
12
TLV2262AQ,
TLV2262AM
12
10
12
10
UNIT
°
p
p
Ω
Ω
Ω
14
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV226x, TLV226xA
†
A
IDDSu ly current
V
O
No load
µA
A
V
0.5 V to 1.7 V ‡
R
kΩ
‡
C
L
100 F
‡
0.25
0.25
V
q V/√H
V
equivalent input noise
V
THD
N
f
kHz
25°C
,
L
,
25°C
0.67
0.67
MH
B
output-swing
O(PP)
,
V
,
25°C
395
395
kH
,
A
V
1,
To 0.1%°5.6
5.6
tsSettling time
,
25°Cµs
L
To 0.01%
12.5
12.5
‡
L,L
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262Q and TLV2262M electrical characteristics at specified free-air temperature, VDD = 3 V (unless otherwise noted) (continued)
TLV2262Q,
PARAMETER TEST CONDITIONS
pp
†
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part.
= 1.5 V,
Full range 500 500
T
25°C 400 500 400 500
TLV2262M
MIN TYP MAX MIN TYP MAX
TLV2262Q and TLV2262M operating characteristics at specified free-air temperature, VDD = 3 V
TLV2262Q,
PARAMETER TEST CONDITIONS
= 50
=
SR Slew rate at unity gain
n
N(PP)
I
n
OM
φ
m
†
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part.
‡
Referenced to 1.5 V
Equivalent input noise voltage
Peak-to-peak
voltage Equivalent input noise
current
Total harmonic
+
distortion plus noise
Gain-bandwidth product
Maximum
p
bandwidth
Phase margin at unity gain
Gain margin
p
O
=
p
f = 10 Hz 25°C 43 43 f = 1 kHz
f = 0.1 Hz to 1 Hz 25°C 0.6 0.6 f = 0.1 Hz to 10 Hz
VO = 0.5 V to 2.5 V,
= 20
RL = 50 k٠f = 1 kHz, RL = 50 kه,
CL = 100 pF
V
= 1 V, A
RL = 50 kه,
A
= –1 Step = 1 V to 2 V, RL = 50 kΩ‡, CL = 100 pF
RL = 50 kه, CL = 100 pF
,
L
,
‡
‡
‡
AV = 1 AV = 10
= 1,
CL = 100 pF
,
‡
†
T
25°C
Full
range
25°C 12 12
25°C 1 1
25°C 0.6 0.6
°
°
°
25°C 55° 55° 25°C 11 11 dB
TLV2262M
MIN TYP MAX MIN TYP MAX
0.35 0.55 0.35 0.55
0.03% 0.03%
0.05% 0.05%
TLV2262AQ,
TLV2262AM
TLV2262AQ,
TLV2262AM
UNIT
UNIT
V/µs
n
µ
fA/√Hz
z
z
z
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
15
TLV226x, TLV226xA
A
VIOInput offset voltage
V
2
2µV/°C
IIOInput offset current
pA
IIBInput bias current
pA
V
|V
R
Ω
V
g
I
100 µA
I
400 µA
V
I
500 µA
V
2.5 V
I
1 m
A
R
50 kΩ
‡
voltage am lification
V
O
V
CMRR
j
IC
dB
k
ygj
DD
dB
Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS
SLOS186A – FEBRUARY 1997 – REVISED JULY 1999
TLV2262Q and TLV2262M electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise noted)
TLV2262Q,
PARAMETER TEST CONDITIONS
p
α
V
V
A
r r
c
z
† ‡
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at TA = 150°C extrapolated
Temperature coefficient of 25°C
VIO
input offset voltage to 125°C Input offset voltage
long-term drift (see Note 4)
p
p
Common-mode input
ICR
voltage range
High-level output voltage
OH
Low-level output voltage
OL
Large-signal differential
VD
Differential input resistance 25°C 10
i(d)
Common-mode input
i(c)
resistance Common-mode input
i(c)
capacitance Closed-loop output
o
impedance Common-mode rejection VIC = 0 to 2.7 V,
ratio Supply voltage rejection VDD = 4.4 V to 8 V,
SVR
ratio (∆VDD/∆VIO)
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part. Referenced to 2.5 V
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV .
p
V
= ±2.5 V , VIC = 0,
DD±
VO = 0, RS = 50 Ω
| ≤5 mV,
IO
IOH = –20 µA 25°C 4.99 4.99
= –
OH
= –
OH
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
= 2.5 V,
IC
,
=
IC
VIC = 2.5 V,
= 1 V to 4
f = 10 kHz, P package 25°C 8 8 pF
f = 100 kHz, AV = 10 25°C 240 240
VO = 2.5 V, RS = 50 Ω
VIC = VDD/2, No load
= 50
S
=
OL
=
OL
=
L
RL = 1 MΩ
‡
†
T
25°C 300 2500 300 950
Full range 3000 1500
25°C 0.003 0.003 µV/mo 25°C 0.5 0.5
125°C 500 500
25°C 1 1
125°C 500 500
25°C
Full range
25°C 4.85 4.94 4.85 4.94
Full range 4.82 4.82
25°C 4.7 4.85 4.7 4.85
Full range 4.5 4.5
25°C 0.09 0.15 0.09 0.15
Full range 0.15 0.15
25°C 0.2 0.3 0.2 0.3
Full range 0.3 0.3
25°C 80 170 80 170
Full range 50 50
25°C 550 550
25°C 10
25°C 70 83 70 83
Full range 70 70
25°C 80 95 80 95
Full range 80 80
TLV2262M
MIN TYP MAX MIN TYP MAX
0 –0.3 0 –0.3
to to to to
4 4.2 4 4.2 0 0
to to
3.5 3.5
12 12
TLV2262AQ,
TLV2262AM
12
10
12
10
UNIT
µ
°
p
p
V
V
V/mV
Ω Ω
Ω
16
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Loading...
+ 35 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use