Texas Instruments TLV1391CDBVR, TLV1391IDBV, TLV1391CDBV Datasheet
T
SYMBOL
TLV1391
SINGLE DIFFERENTIAL COMPARATORS
SLCS128B – APRIL 1996 – REVISED JUNE 1999
D
Low-Voltage and Single-Supply Operation
V
= 2 V to 7 V
CC
D
Common-Mode Voltage Range Includes
Ground
D
Fast Response Time . . . 0.7 µs Typ
D
Low Supply Current ...80 µA Typ and
150 µA Max
D
Fully Specified at 3-V and 5-V Supply
V
/GND
DBV PACKAGE
IN–
CC–
IN+
(TOP VIEW)
1
5
2
3
4
V
CC+
OUT
Voltages
D
Available in SOT-23 (DBV) Packaging
description
The TLV1391 is a differential comparator built using a Texas Instruments low-voltage, high-speed bipolar
process. These devices have been developed specifically for low-voltage, single-supply applications. Their
enhanced performance makes them excellent replacements for the LM393 in the improved 3-V and 5-V system
designs of today.
The TL V1391, with its typical supply current of only 80 µA, is ideal for low-power systems. Response time also
has been improved to 0.7 µs.
The TL V1391C is characterized for operation from 0°C to 70°C and the TL V1391I is characterized for operation
from –40°C to 85°C.
AVAILABLE OPTIONS
A
0°C to 70°C TLV1391CDBV VABC TLV1391Y
–40°C to 85°C TLV1391IDBV VABI
†
The DBV package is only available taped and reeled. Chip forms are specified for
operation at 25°C only.
PACKAGED DEVICES
SOT-23 (DBV)
CHIP FORM
(Y)
symbol (each comparator)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
IN+
OUT
IN–
Copyright 1999, Texas Instruments Incorporated
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
1
TLV1391
SINGLE DIFFERENTIAL COMPARATORS
SLCS128B – APRIL 1996 – REVISED JUNE 1999
TLV1391, TLV1391Y equivalent schematic
V
CC
IN +
IN –
GND OUT
COMPONENT COUNT
Transistors 26
Resistors 1
Diodes
Epi-FET 1
4
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
O erating free-air tem erature, T
A
°C
TLV1391
SINGLE DIFFERENTIAL COMPARATORS
SLCS128B – APRIL 1996 – REVISED JUNE 1999
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
Differential input voltage, V
Input voltage, V
Output voltage, V
Output current, I
Duration of short-circuit current to GND (see Note 3) Unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the network GND.
2. Differential voltages are at the noninverting input with respect to the inverting input.
3. Short circuits from the outputs to VCC can cause excessive heating and eventual destruction of the chip.
4. Maximum power dissipation is a function of TJ(max),
ambient temperature is PD = (TJ(max) – TA)/
5. The package thermal impedance is calculated in accordance with JESD 51.
(see Note 1) 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(any input) –0.3 V to V
I
7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
(each output) 20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
(see Note 2) ±7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ID
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(see Note 4 and 5) 347°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
θ
, and TA. The maximum allowable power dissipation at any allowable
θ
JA
JA
. Operating at the absolute maximum TJ of 150°C can impact reliability.
recommended operating conditions
Supply voltage, V
p
CC
MIN MAX
2 7 V
p
TLV1391C 0 70
TLV1391I –40 85
UNIT
°
†
CC
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
Loading...