Texas instruments CONNECT-TO-CLASS CONFIGURATION REQUIREMENTS

Connect-to-Class™ Configuration Requirements

• TI-Nspire™ family handhelds (with OS version 1.4 or higher)

• A computer with the minimum system requirements (See the
Connect-to-Class™ Readme file for system requirements.)

• Compatible USB cables (Standard A to Mini B) of appropriate length,
used in combination with the two USB extension cables provided
with the product

– USB cable length between the computer and USB hub or

between the TI-Nspire™ handheld and USB hub should not
exceed 16 feet.

– USB cables between the TI-Nspire™ handheld and USB hub

should consist of Standard A and Mini B connectors. You can use
the USB cable that came with the handheld or any Standard A to
Mini B USB cable.

• The two four-port USB hubs supplied with the product, connected to
a personal computer

Warning: Use only the supplied hubs with Connect-to-Class™. In
addition, do not connect any other product or non-TI-Nspire™ device
into these hubs.

Please contact TI by e-mail at [e-mail] for additional hub details.

Sample Configuration diagrams

4-port, direct connect

USB Extension Cable

25

Warning: Use only the supplied hubs with Connect-to-Class™. In
addition, do not connect any other product or non-TI-Nspire™ device
into these hubs.

(2) 4-port, daisy-chained

USB Extension Cables

Warning: Use only the supplied hubs with Connect-to-Class™. In
addition, do not connect any other product or non-TI-Nspire™ device
into these hubs.

(2) 4-port, direct connect

USB Extension Cable

USB Extension

Cable

Warning: Use only the supplied hubs with Connect-to-Class™. In
addition, do not connect any other product or non-TI-Nspire™ device
into these hubs.

26