Page 1
查询7706002CA供应商
Data sheet acquired from Harris Semiconductor
SCHS056D – Revised August 2003
CD4071B Quad 2-Input OR Gate
CD4072B Dual 4-Input OR Gate
CD4075B Triple 3-Input OR Gate
H
OR gates provide the system designer with
direct implementation of the positive-logic OR
function and supplement the existing family of
CMOS gates.
The CD4071B, CD4072B, and CD4075B types
are supplied in 14-lead hermetic dual-in-line
ceramic packages (F3A suffix), 14-lead
dual-in-line plastic packages (E suffix), 14-lead
small-outline packages (M, MT, M96, and NSR
suffixes), and 14-lead thin shrink small-outline
packages (PW and PWR suffixes).
CD4071B, CD4072B, and CD4075B
Copyright 2003, Texas Instruments Incorporated
Page 2
Page 3
Page 4
Page 5
PACKAGE OPTION ADDENDUM
www.ti.com
PACKAGING INFORMATION
Orderable Device Status
7706002CA ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4071BE ACTIVE PDIP N 14 25 Pb-Free
CD4071BF ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4071BF3A ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4071BM ACTIVE SOIC D 14 50 Pb-Free
CD4071BM96 ACTIVE SOIC D 14 2500 Pb-Free
CD4071BMT ACTIVE SOIC D 14 250 Pb-Free
CD4071BNSR ACTIVE SO NS 14 2000 Pb-Free
CD4071BPW ACTIVE TSSOP PW 14 90 Pb-Free
CD4071BPWR ACTIVE TSSOP PW 14 2000 Pb-Free
CD4072BE ACTIVE PDIP N 14 25 Pb-Free
CD4072BF ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4072BF3A ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4072BM ACTIVE SOIC D 14 50 Pb-Free
CD4072BM96 ACTIVE SOIC D 14 2500 Pb-Free
CD4072BMT ACTIVE SOIC D 14 250 Pb-Free
CD4072BNSR ACTIVE SO NS 14 2000 Pb-Free
CD4072BPW ACTIVE TSSOP PW 14 90 Pb-Free
CD4072BPWR ACTIVE TSSOP PW 14 2000 Pb-Free
CD4075BE ACTIVE PDIP N 14 25 Pb-Free
CD4075BF ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4075BF3A ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
CD4075BM ACTIVE SOIC D 14 50 Pb-Free
CD4075BM96 ACTIVE SOIC D 14 2500 Pb-Free
CD4075BMT ACTIVE SOIC D 14 250 Pb-Free
CD4075BNSR ACTIVE SO NS 14 2000 Pb-Free
CD4075BPW ACTIVE TSSOP PW 14 90 Pb-Free
CD4075BPWR ACTIVE TSSOP PW 14 2000 Pb-Free CU NIPDAU Level-1-250C-UNLIM
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(RoHS)
(2)
Lead/Ball Finish MSL Peak Temp
CU NIPDAU Level-NC-NC-NC
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-NC-NC-NC
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-NC-NC-NC
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-2-260C-1 YEAR/
CU NIPDAU Level-1-250C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
Level-1-235C-UNLIM
28-Feb-2005
(3)
Addendum-Page 1
Page 6
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device Status
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
(2)
Lead/Ball Finish MSL Peak Temp
28-Feb-2005
(3)
(RoHS)
JM38510/17101BCA ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
JM38510/17103BCA ACTIVE CDIP J 14 1 None Call TI Level-NC-NC-NC
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
Page 7
Page 8
Page 9
Page 10
Page 11
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65
1,20 MAX
14
0,30
0,19
8
4,50
4,30
PINS **
7
Seating Plane
0,15
0,05
8
1
A
DIM
14
0,10
6,60
6,20
M
0,10
0,15 NOM
0°–8°
2016
Gage Plane
24
0,25
0,75
0,50
28
A MAX
A MIN
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
7,70
9,80
9,60
4040064/F 01/97
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Page 12
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty . Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
Loading...