10
To prepare your
workstation for software
development, power off
the kit, remove the
microSD card; insert it
into the included SD
card adapter (if
applicable); and insert it
into your PC. If your PC
does not include an SD
slot, USB SD card
adapters are readily
available. Follow the
instructions below.
Linux Software Development Kit
From a Linux host PC, insert the
Linux µSD card into the PC, and
from the START HERE folder, run
.
If you need help on setting up a
Linux Host PC, please visit
.
Connect the supplied USB cable
to the micro USB connector on the
AM437x EVM and plug the other
end to your PC.
Connect the supplied Ethernet
cable to the RJ-45 jack on the
AM437x EVM. Connect the other
end of the cable to an Internetenabled router or Ethernet switch.
setup.htm
www.ti.com/startyourlinux
Begin development
9
Plug in the camera board
(included) as shown and
click on the camera demo
icon to view two camera
inputs on the screen. If the
camera board is not plugged
in, a single camera input will
be displayed.
8
You are now ready to explore
the Linux demos which
include various example
applications. Click on any
icon to start the demo and
click “exit” (if available) to quit
the demo.
Linux™
AM437x Evaluation Module
Quick Start Guide
Manufactured by Mistral Solutions Pvt. LTD. • www.mistralsolutions.com/
For more information:
www.ti.com/am437xevm
For more information on AM437x processors, including:
• User Guide • How Tos
• Software • Design Files
Please visit and
For support questions, please contact: or .
Provide feedback: Take this survey and tell us about your experience using the AM437x EVM:
www.ti.com/am437x www.ti.com/am437xevm
www.ti.com/survey
support@ti.com www.ti.com/e2e
The platform bar and Sitara are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.Trademarks in this issue:
© 2014 Texas Instruments Incorporated
Printed in U.S.A. by (Printer, City, State)
SPRW256
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are
advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product
designs, software performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement
thereof.
4
Insert the Linux µSD card into
the AM437x EVM as shown.
The black surface should be
facing up.
Welcome to the AM437x General-Purpose (GP) Evaluation Module (EVM) Quick Start Guide. This guide
is designed to help you through the initial setup of the EVM. This EVM allows you to experience Linux™
®
and other operating systems (OSs) that showcase the AM437x Cortex -A9 processor, 3D graphics and
more. The AM437x EVM contains the following:
• Hardware
– Sitara™ AM437x Cortex-A9 processor
– TPS65218 power management I/C
– 7" capacitive touch LCD
– 2GB DDR3
– Two camera modules
– On-board NAND Flash and eMMC
– Audio input and output
– DCAN, UART, USB, Ethernet and HDMI
connectors
• Printed documents
– AM43x GP EVM Quick Start Guide (this
document)
• Miscellaneous
– Power supply with international adapters
– µSD card with Linux™
– µSD-to-SD card adapter
– UART serial cable
– Ethernet cable
– Micro USB 2.0 cable
AM437x EVM Board Front
Power
LEDs
Power
switch
+5V
supply
DCAN #0
Camera #1 Camera #0
JTAG
Connector
UART #0
(J10)
Micro USB
2.0
USB 2.0
Audio In
User
LEDs
User
LEDs
HDMI User buttons
Audio Out
Gigabit
Ethernet
AM437x EVM Board Back
SYSBOOT
DDR3
memory
JTAG
USB
DCAN
#1
eMMC
NAND
memory
NAND
memory
Button
cell
holder
PMIC
TPS65218
AM437x
processor
Default setup (OS boot from microSD card)
1
Verify all the DIP switches are
set as shown (all ON). These
switches are located on the
back of the AM437x EVM.
2
Connect the supplied serial
null modem cable to the
UART DB-9 (J10) connector.
Note: You must use the
supplied cable or another
serial null modem cable.
Connect the Ethernet cable
to the RJ-45 jack located on
the AM437x EVM. Connect
the other end of the cable to
an Internet-enabled router or
Ethernet switch.
3
5
Connect the power cable to
the power jack as shown and
plug in to an AC power source.
Note: When powering this EVM,
always use the supplied power
supply (GlobTek GT-41081-1805 or
CUI/V-Infinity Part Number
EMSA050300-P6P-SZ, Model 3A182WP05) or equivalent model
having output voltage of +5VDC and
output current max 3.0 Amp as well
as the applicable regional product
regulatory/safety certification
requirements such as (by example)
UL, CSA, VDE, CCC, PSE, etc.
6
To turn on, slide the power
switch (SW4) on the AM437x
EVM to the left as shown.
Both power LEDs (shown
inside the red circle) will turn
on. To turn off, slide the
power button to the right.
7
Note that this EVM comes
with a coin battery holder. A
coin battery is not necessary
for normal operation of the
EVM. A coin battery (not
included) can be inserted for
testing ultra-low-power RTConly mode.
Note: This EVM is designed for
optional use with a removable
CR1632 UL recognized lithium
battery (not supplied). Always use a
CR1632VP Energizer 3V Lithium
coin cell battery
(
) or similar CR1632 UL
recognized battery with nominal
voltage 3.0 Volts, capacity 130mAh,
and discharge rate 190µA.
http://data.energizer.com/PDFs/
cr1632.pdf
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
Loading...