TEXAS INSTRUMENTS THS4061, 4062 Technical data
查询THS4061供应商
THS4061, THS4062
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
D
High Speed
– 180 MHz Bandwidth (G = 1, –3 dB)
– 400 V/µs Slew Rate
– 40-ns Settling Time (0.1%)
D
High Output Drive, IO = 115 mA (typ)
D
Excellent Video Performance
– 75 MHz 0.1 dB Bandwidth (G = 1)
– 0.02% Differential Gain
– 0.02° Differential Phase
D
Very Low Distortion
– THD = –72 dBc at f = 1 MHz
D
Wide Range of Power Supplies
– VCC = ±5 V to ±15 V
D
Available in Standard SOIC, MSOP
PowerPAD, JG, or FK Package
D
Evaluation Module Available
description
The THS4061 and THS4062 are generalpurpose, single/dual, high-speed voltage feedback amplifiers ideal for a wide range of
applications including video, communication, and
imaging. The devices offer very good ac
performance with 180-MHz bandwidth, 400-V/µs
slew rate, and 40-ns settling time (0.1% ). The
THS4061/2 are stable at all gains for both
inverting and noninverting configurations. These
amplifiers have a high output drive capability of
1 15 mA and draw only 7.8 mA supply current per
channel. Excellent professional video results can
be obtained with the low differential gain/phase
errors of 0.02%/0.02° and wide 0.1 db flatness to
75 MHz. For applications requiring low distortion,
the THS4061/2 is ideally suited with total
harmonic distortion of –72 dBc at f = 1 MHz.
IN–
IN+
CC–
THS4061
(TOP VIEW)
1
2
3
4
NULL
8
V
7
CC+
OUT
6
5
NC
Cross-Section View Showing
PowerPAD Option (DGN)
FK PACKAGE
(TOP VIEW)
JG, D AND DGN PACKAGE
NULL
V
NC – No internal connection
NC
NC
4
IN–
5
NC
6
IN+
7
NC
8
NC
V
+
I
THS4061
_
D AND DGN PACKAGE
1OUT
1IN–
1IN+
–V
CC
THS4061
NULLNCNULL
1920132
1312119 10
NCNCNC
CC–
V
75 Ω
THS4062
(TOP VIEW)
1
2
3
4
NC
NC
18
V
17
CC+
NC
16
OUT
15
NC
14
75 Ω
75 Ω
8
7
6
5
V
CC+
2OUT
2IN–
2IN+
V
O
CAUTION: The THS4061 and THS4062 provide ESD protection circuitry. However , permanent damage can still occur if this
device is subjected to high-energy electrostatic discharges. Proper ESD precautions are recommended to avoid any
performance degradation or loss of functionality
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Insruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
2 kΩ
2 kΩ
LINE DRIVER (G = 2)
Copyright 2000, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1
THS4061, THS4062
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
RELATED DEVICES
DEVICE DESCRIPTION
THS4011/2
THS4031/2
THS4061/2
T
A
0°C to
70°C
–40°C to
85°C
–55°C to
125°C
†
The D and DGN packages are available taped and reeled. Add an R suffix to the device type (i.e., THS4061CDGNR).
NUMBER OF
CHANNELS
1 THS4061CD THS4061CDGN — — TIABS THS4061EVM
2 THS4062CD THS4062CDGN — — TIABM THS4062EVM
1 THS4061ID THS4061IDGN — — TIABT —
2 THS4062ID THS4062IDGN — — TIABN —
1 — — THS4061MJG THS4061MFK — —
PLASTIC
SMALL
OUTLINE
(D)
†
290-MHz Low Distortion High-Speed Amplifiers
100-MHz Low Noise High Speed-Amplifiers
180-MHz High-Speed Amplifiers
AVAILABLE OPTIONS
PACKAGED DEVICES
PLASTIC
MSOP
(DGN)
†
CERAMIC
DIP
(JG)
CHIP
CARRIER
(FK)
SYMBOL
MSOP
EVALUATION
MODULES
functional block diagram
Null
1
IN–
IN+
2
3
+
8
–
6
OUT
Figure 1. THS4061 – Single Channel
V
CC
1IN–
1IN+
2IN–
2IN+
2
3
6
5
8
–
+
–
+
4
1
1OUT
7
2OUT
–V
CC
Figure 2. THS4062 – Dual Channel
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE
A
A
A
A
Suppl
oltage, V
and V
V
THS4061, THS4062
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
†
Supply voltage, VCC+ to VCC– 33 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, VI ±V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO 150 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, V
±4 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IO
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature, TA: C-suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I-suffix –40°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M-suffix –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature, T
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds, D and DGN package 300°C. . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds, JG package 300°C. . . . . . . . . . . . . . . . . . . .
Case temperature for 60 seconds, FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DISSIPATION RATING TABLE
T
≤ 25°C DERATING FACTOR T
POWER RATING ABOVE TA = 25°C
D 740 mW 6 mW/°C 475 mW 385 mW —
‡
DGN
JG 1057 mW 8.4 mW/°C 627 mW 546 mW 210 mW
FK 1375 mW 11 mW/°C 880 mW 715 mW 275 mW
‡
The DGN package incorporates a PowerPAD on the underside of the device. This acts as a heatsink and must be connected to a thermal dissipation
plane for proper power dissipation. Failure to do so can result in exceeding the maximum specified junction temperature, which could permanently
damage the device.
2.14 W 17.1 mW/°C 1.37 W 1.11 W —
= 70°C T
POWER RATING
= 85°C T
POWER RATING
= 125°C
POWER RATING
CC
recommended operating conditions
pp
y v
Operating free-air temperature, T
CC
+
CC
–
A
MIN NOM MAX UNIT
Dual supply ±4.5 ±16
Single supply 9 32
C-suffix 0 70
I-suffix –40 85
M-suffix –55 125
°C
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
THS4061, THS4062
†
bandwidth (–3 dB)
Gain
1
MH
Bandwidth for 0.1 dB flatness
Gain
1
MH
SR
Slew rate
Gain
1
V/µs
Settling time to 0.1%
Gain
1
ns
t
Settling time to 0.01%
Gain
1
ns
†
Differential gain error
Gain
NTSC
IRE modulation
Differential phase error
Gain
NTSC
IRE modulation
†
V
±15 V,V
±10 V
R
1 kΩ
V/mV
Open loop gain
V
V
R
kΩ
V/mV
V
T
full range
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
electrical characteristics at TA = 25°C, VCC = ±15 V, RL = 150 Ω (unless otherwise noted)
dynamic performance
THS4061C/I,
PARAMETER
Dynamic performance small-signal
BW
s
†
Full range = 0°C to 70°C for C suffix and –40°C to 85°C for I suffix
–
VCC = ±5 V Gain = 1 180 MHz
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V, 5-V step (0 V to 5 V)
VCC = ±5 V, VO = –2.5 V to 2.5 V,
VCC = ±15 V, 5-V step (0 V to 5 V)
VCC = ±5 V, VO = –2.5 V to 2.5 V,
TEST CONDITIONS
= –
=
= –
= –
= –
THS4062C/I
MIN TYP MAX
50
50
75
20
400
350
40
40
140
150
UNIT
z
z
noise/distortion performance
THS4061C/I,
PARAMETER
THD Total harmonic distortion f = 1 MHz –72 dBc
V
I
n
†
Full range = 0°C to 70°C for C suffix and –40°C to 85°C for I suffix
Input voltage noise f = 10 kHz, VCC = ±5 V or ±15 V 14.5 nV/√Hz
n
Input current noise f = 10 kHz, VCC = ±5 V or ±15 V 1.6 pA/√Hz
= 2,
p
Channel-to-channel crosstalk
(THS4062 only)
= 2,
VCC = ±5 V or ±15 V, f = 1 MHz 65 dB
TEST CONDITIONS
, 40
, 40
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V 0.02°
VCC = ±5 V 0.06°
THS4062C/I
MIN TYP MAX
0.02
%
0.02
%
dc performance
THS4061C/I,
PARAMETER
=
CC
p
p
= ±5 V,
CC
Input offset voltage VCC = ±5 V or ±15 V
OS
Offset drift VCC = ±5 V or ±15 V
I
IB
I
OS
†
Full range = 0°C to 70°C for C suffix and –40°C to 85°C for I suffix
Input bias current VCC = ±5 V or ±15 V TA = full range 3 6 µA
Input offset current VCC = ±5 V or ±15 V TA = full range 75 250 nA
Offset current drift TA = full range 0.3 nA/°C
O
O
TEST CONDITIONS
=
= ±2.5 V,
,
L
L
=
= 1
TA = 25°C 5 15
TA = full range 4
TA = 25°C 2.5 8
TA = full range 2
=
A
THS4062C/I
MIN TYP MAX
2.5 8 mV
15 µV/°C
UNIT
UNIT
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
†
V
Common-mode input voltage range
V
CMRR
Common mode rejection ratio
T
full range
dB
†
V
VOOutput voltage swing
R
kΩ
V
IOOutput current
R
Ω
mA
†
VCCSuppl
oltage operating range
V
ICCQuiescent current (per amplifier)
T
full range
mA
PSRR
Power supply rejection ratio
V
±15 V
dB
THS4061, THS4062
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
electrical characteristics at TA = 25°C, VCC = ±15 V , RL = 150 Ω (unless otherwise noted) (continued)
input characteristics
THS4061C/I,
PARAMETER
ICR
R
C
†
Full range = 0°C to 70°C for C suffix and –40°C to 85°C for I suffix
Input resistance 1 MΩ
I
Input capacitance 2 pF
i
p
VCC = ±15 V ±13.8 ±14.1
VCC = ±5 V ±3.8 ±4.3
VCC = ±15 V, V
VCC = ±5 V, V
output characteristics
PARAMETER
VCC = ±15 V RL = 250 Ω ±11.5 ±12.5
p
p
I
SC
R
†
Full range = 0°C to 70°C for C suffix and –40°C to 85°C for I suffix
Short-circuit current VCC = ±15 V 150 mA
Output resistance Open loop 12 Ω
O
VCC = ±5 V RL = 150 Ω ±3.2 ±3.5
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
TEST CONDITIONS
= ±12 V
ICR
= ±2.5 V
ICR
TEST CONDITIONS
=
A
L
L
= 1
= 20
THS4062C/I
MIN TYP MAX
70 110
70 95
THS4061C/I,
THS4062C/I
MIN TYP MAX
±13 ±13.5
±3.5 ±3.7
80 115
50 75
UNIT
UNIT
power supply
PARAMETER
pp
y v
†
Full range = 0°C to 70°C for C suffix and –40°C to 85°C for I suffix
pp
p
p
p
Dual supply ±4.5 ±16.5
Single supply 9 33
VCC = ±15 V
VCC = ±5 V
= ±5 V or
CC
TEST CONDITIONS
THS4061C/I,
THS4062C/I
MIN TYP MAX
=
A
TA = 25°C 70 78
TA = full range 68
7.8 10.5
7.3 10
UNIT
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
THS4061, THS4062
PARAMETER
TEST CONDITIONS
†
UNIT
Gain
1
MH
yg
Gain
1
MH
Bandwidth for 0.1 dB flatness
Gain
1
MH
Settling time to 0.1%
Gain
1
ns
t
Settling time to 0.01%
Gain
1
ns
PARAMETER
TEST CONDITIONS
†
UNIT
Differential gain error
Gain
NTSC
IRE Modulation
%
Differential phase error
Gain
NTSC
IRE Modulation
PARAMETER
TEST CONDITIONS
†
UNIT
Open loop gain
T
range
V/mV
Input offset voltage
V
±5 V or ±15 VR
1 kΩ
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
electrical characteristics at TA = 25°C, VCC = ±15 V, RL = 150 Ω (unless otherwise noted)
dynamic performance
THS4061M
MIN TYP MAX
Unity-gain bandwidth Closed loop, RL = 1 kΩ VCC = ±15 V *140 180 MHz
VCC = ±15 V
Dynamic performance small-signal
BW
SR Slew rate VCC = ±15 V RL = 1 kΩ *400 500 V/µs
s
†
Full range = –55°C to 125°C for M suffix
*This parameter is not tested.
bandwidth (–3 dB)
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V, 5-V step (0 V to 5 V)
VCC = ±5 V, VO = –2.5 V to 2.5 V,
VCC = ±15 V, 5-V step (0 V to 5 V)
VCC = ±5 V, VO = –2.5 V to 2.5 V,
=
= –
=
= –
= –
180
180
50
50
75
20
40
40
140
150
z
z
z
noise/distortion performance
THS4061M
MIN TYP MAX
THD Total harmonic distortion f = 1 MHz –72 dBc
V
I
n
†
Full range = –55°C to 125°C for M suffix
Input voltage noise f = 10 kHz, VCC = ±5 V or ±15 V 14.5 nV/√Hz
n
Input current noise f = 10 kHz, VCC = ±5 V or ±15 V 1.6 pA/√Hz
= 2,
p
= 2,
, 40
, 40
VCC = ±15 V 0.02
VCC = ±5 V 0.02
VCC = ±15 V 0.02°
VCC = ±5 V 0.06°
dc performance
THS4061M
MIN TYP MAX
p
p
V
IO
I
IB
I
IO
†
Full range = –55°C to 125°C for M suffix
p
Offset drift VCC = ±5 V or ±15 V RL = 1 kΩ TA = full range 15 µV/°C
Input bias current VCC = ±5 V or ±15 V RL = 1 kΩ TA = full range 3 6 µA
Input offset current VCC = ±5 V or ±15 V RL = 1 kΩ TA = full range 75 250 nA
Offset current drift VCC = ±5 V or ±15 V RL = 1 kΩ TA = full range 0.3 nA/°C
VCC = ±15 V, VO = ±10 V, RL = 1 kΩ
VCC = ±5 V, VO = ±2.5 V, RL = 1 kΩ
CC
=
=
L
= full
A
TA = 25°C 2.5 8 mV
TA = full range 9 mV
5 9
2.5 6
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER
TEST CONDITIONS
†
UNIT
V
Common-mode input voltage range
V
CMRR
Common mode rejection ratio
dB
PARAMETER
TEST CONDITIONS
†
UNIT
V
VOOutput voltage swing
R
kΩ
V
IOOutput current
R
Ω
mA
PARAMETER
TEST CONDITIONS
†
UNIT
VCCSuppl
oltage operating range
V
T
25°C
ICCQuiescent current
mA
T
range
PSRR
Power supply rejection ratio
V
±15 V
dB
THS4061, THS4062
180-MHz HIGH-SPEED AMPLIFIERS
SLOS234D – DECEMBER 1998 – REVISED FEBRUARY 2000
electrical characteristics at TA = full range, VCC = ±15 V, RL = 1 kΩ (unless otherwise noted)
(continued)
input characteristics
THS4061M
MIN TYP MAX
ICR
R
C
†
Full range = –55°C to 125°C for M suffix
Input resistance 1 MΩ
I
Input capacitance 2 pF
i
p
output characteristics
p
p
I
SC
R
†
Full range = –55°C to 125°C for M suffix
Short-circuit current VCC = ±15 V TA = 25°C 150 mA
Output resistance Open loop 12 Ω
O
VCC = ±15 V ±13.8 ±14.1
VCC = ±5 V ±3.8 ±4.3
VCC = ±15 V, V
VCC = ±5 V, V
VCC = ±15 V RL = 250 Ω ±12 ±13.1
VCC = ±5 V RL = 150 Ω ±3.2 ±3.5
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
= ±12 V 70 86
ICR
= ±2.5 V 80 90
ICR
MIN TYP MAX
= 1
L
= 20
L
±13 ±13.5
±3.5 ±3.7
70 115
50 75
THS4061M
power supply
pp
y v
†
Full range = –55°C to 125°C for M suffix
p
pp
THS4061M
MIN TYP MAX
Dual supply ±4.5 ±16.5
Single supply 9 33
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
= ±5 V or
CC
°
=
A
= full
A
TA = 25°C 76 80
TA = full range 74 78
7.8 9
7.3 8.5
11
10.5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
7
Loading...