TeVii Technology G201TX, G201RX User Manual

WHD1001

Wireless HDMI sender

User Guide

1

Disclaimer

Pictures, images and product specifications herein are for references only. To improve

internal design, operational function, and/or reliability, we reserve the right to make changes

to the products described in this document without obligation to notify any person or

organization of such revisions or changes. we do not assume any liability that may occur due

to the use or application of the product or circuit layout(s) described herein. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but all

statements, information and recommendations in this document do not constitute the

warranty of any kind, express or implied.

2

Important Safety Instructions

1. Do not open this product or attempt to service it; it may expose you to dangerous high

voltage or other risks.

2. Do not operate this product near water.

3. Do not place or operate this product near a radiator or a heat register.

4. Do not expose this product to dampness, dust or corrosive liquids.

5. Do not connect this product or disconnect it from a wall socket during a lightning or a

thunderstorm.

6. Do not block the ventilation slots of this product, for insufficient airflow may harm it.

7. Do not put anything on this product.

8. Place the connecting cables properly so that people won’t stumble or walk on it.

9. This product should be operated from the type of power indicated on the marking label. If

you are not sure of the type of power available, consult the qualified technician.

10. Unplug this product from the mains and refer the product to qualified service personnel

for the following conditions:

1) If liquid has been spilled on the product.

2) If the product has been exposed to rain or water.

11. Unplug this product from the wall socket before cleaning. Use a damp cloth for cleaning.

Do not use liquid cleaners or aerosol cleaners.

12. The Operating temperature is 0℃~40℃ (32℉~104℉). The Storage temperature is

-40℃~70℃ (-40℉~158℉).

3

Preface

Thank you for choosing our products! Please read this user guide before you start! This

user guide instructs you to install and configure your device. This user guide applies to

wireless HDMI sender.

Chapter 1 Introduction

1.1 Product Overview

Congratulations on your purchase of this outstanding wireless HDMI sender. The

wireless HDMI Sender is a private protocol-based end-to-end solution for interactive,

multi-room wireless display and home video distribution. which allows end users to play any

video remotely on another screen with no discernable lag even if the device is located in a

different room.

The product includes a Wireless HDMI Transmitter (TX) box and Wireless HDMI

Receiver (RX) box. Wireless HDMI Transmitter (TX) is a wireless HD streaming device that

can wirelessly send video from PC/DVD player/Set top box/game console to other display.

Wireless HDMI Receiver (RX) is a wireless HD streaming device that can wirelessly receive

video sent from a TX.

4

The TX/RX compatible with any devices with a HDMI output, like set-top boxe, DVD &

TX

SPEC

Video output resolution:

1080p60，1080p50，1080p24，720p60，720p50， 576p50，480p60，
1080i60，1080i50

Video input resolution:

1080p60，1080p50，1080p24，720p60，720p50， 576p50，480p60，
1080i60，1080i50

Video input/ouput:

HDMI 1.4a

Digital Audio support:

48/44.1KHz, 16bit, Digital audio compliant

Any Devices

Compatible with any devices with aHDMI, like set-top

box, DVD & Blu-Ray player, PC, game console, etc.

Any Where

Multi-room wireless display and home video distribution center

Coverage up to 150-200 meters

No Delay

No detectable delay

The lowest latency and most stable WiFi-based HD

transmission solution

interactive

End user can control the devices in different room by IR

remote control/mouse/keyboard.

Private Protocol

Private protocol-based solution

Stable, advanced capabilities

Blu-Ray player, PC, game console, etc.

1.2 Product Feature

5