Testo SE and KGaA 04800069 User Manual

Approval and Certification

V

Product

Mat.-No.

Date

Country Comments

0480 0069

0480 0069

28.06.2018

Australia

Canada

Product IC: 6127B-04800069
IC Warnings

EU countries:
Belgium (BE), Bulgaria (BG), Denmark (DK), Germany (DE),
Estonia (EE), Finland (FI), France (FR), Greece (GR), Ireland

Europa + EFTA

(IE), Italy (IT), Latvia (LV), Lithuania (LT), Luxembourg (LU),
Malta (MT), Netherlands (NL), Austria (AT), Poland (PL),
Portugal (PT), Romania (RO), Sweden (SE), Slovakia (SK),
Slovenia (SI), Spain (ES), Czech Republic (CZ), Hungary (HU),
United Kingdom (GB), Republic of Cyprus (CY).

EFTA countries:
Iceland, Liechtenstein, Norway, Switzerland

Turkey Authorized

USA

WLAN

Bluetooth®-Module

Product FCC ID: WAF-04800069
FCC Warnings

Feature Values

WLAN Range 20 m (free field)

Compliant to protocol 802.11b/g/n(11M~350M bit/s)

Type of Modulation 802.11b; 802.11g 802.11n(20MHz);

RF Band Band:ISM Band 2400-2483.5

Output power 16 dbm

Feature

Bluetooth® Range 10 m (free field)
Bluetooth® type GFSK; 8DPSK;π/4DQPSK
Qualified Design ID D039574
Bluetooth® company Testo SE & Co. KGaA
RF Band 2.4 GHz ISM band

Output power 5.5 dbm

E 1561

802.11n(40MHz)

alues

2402-2480MHz

IC Warrnings

RSS-Gen & RSS-247 statement:

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.

Caution: Radio Frequency Radiation Exposure

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
End user must follow the specific operating instructions for satisfying RF exposure compliance.

The device is designed to meet the requirements for exposure to radio waves established by the IC.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certification for using at the ear is 0.137 W/Kg, at the
Body is 0.046 W/Kg.

This radio equipment should be installed and operated keeping the radiator at least 15mm or more
away from person´s body in normal use position. When used with any accessory that contains no metal
the positions should be a minimum of 15mm from the body.

Co-Location:

This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.

Attention : exposition au rayonnement de radiofréquences

Cet équipement est conforme aux limites d'exposition aux radiations IC définies pour un environnement
non contrôlé. L'équipement final doit suivre les instructions d'utilisation spécifiques pour satisfaire à la
conformité à l'exposition aux radio fréquences.

L'appareil est conçu pour répondre aux exigences d'exposition aux ondes radio établies par le IC, qui
fixent une limite SAR de 1,6 W / kg en moyenne sur un gramme de tissu. La valeur DAS la plus élevée

rapportée sous cette norme lors de la certification du produit pour l'utilisation à l'oreille est de 0,137 W /
Kg, au corps est de 0,046 W / kg.

Cet équipement radio doit être installé et utilisé en gardant le radiateur au moins 15 mm ou plus du
corps de la personne en position d'utilisation normale. Lorsqu'il est utilisé avec un accessoire ne
contenant pas de métal, les positions doivent être à au moins 15 mm du corps.

Co-location :
Ce transmetteur ne peut pas être installé en colocation ou être utilisé avec une autre antenne ou
transmetteur, quel qu'en soit le type.

FCC Warnings

Information from the FCC (Federal Communications Commission)

For your own safety

Shielded cables should be used for a composite interface. This is to ensure continued protection
against radio frequency interference.

FCC warning statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution

Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment. Shielded interface cable must be used in order to comply
with the emission limits.

Warning

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.

Caution: Radio Frequency Radiation Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End user must follow the specific operating instructions for satisfying RF exposure compliance.

The device is designed to meet the requirements for exposure to radio waves established by the FCC.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certification for using at the ear is 0.137 W/Kg, at the
Body is 0.046 W/Kg.

This radio equipment should be installed and operated keeping the radiator at least 15mm or more
away from person´s body in normal use position. When used with any accessory that contains no metal
the positions should be a minimum of 15mm from the body.

Co-Location:

This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.

Location of FCC and IC ID

FCC and IC ID are placed under the battery of the equipment. Please remove the battery cover and
battery to read the identification.
Before using the product, please take out the insulation piece and consider the FCC and IC labels in
the battery compartment.

FCC et IC ID sont placés sous la batterie de l'équipement. S'il vous plaît retirer le couvercle de la
batterie et la batterie pour lire l'identification.
Avant d'utiliser le produit, retirez l'isolant et considérez les étiquettes FCC et IC dans le compartiment à
piles.



Technical Data

Feature Value

Display 5.0 Inch, HD 1280*720 pixels, IPS (160k)

Memory

Processor

Connections

Camera

Battery 2150mAh

Power input 5V / 1A

Storage
temperature

Operating
temperature

EMMC 8GB+DDR3 1GB
Maximum Extended Storage 64GB

Model MT6580A
Feature Quad Core
Frequency: 1.3GHz

Ear phone jack
Bluetooth® 4.0
Charge via USB
WLAN

front camera:
Sensor *2.0MP / 3P high-resolution lens, Sensing area
1/5 Inch, Pixel area 1.67um * 1.67um, Aperture F2.8
Aperture, Sensor type CMOS
back camera:
Sensor *5.0MP AF /3P high-resolution lens, Sensing area
1/5 Inch, Pixel area 1.12um * 1.12um, Aperture F2.28
Aperture 67.9 degree, Sensor type CMOS, Autofocus
Support, Flash led Support

-20°C to 50°C

-5 to +45°C

Testo - Informations

Safety instructions

Enviroment

Cleaning

Storing