Advanced Test Equipment Rentals
Find a Product
Home
- ESD/Pulsed EMI Compliance
Schaffner NSG1025 &
CDN125
NSG1025 Available with CDN125 coupling
clamp (shown below) or
Coupler (not shown)
CDN125 - Capacitive Coupling Clamp
Coupling clamp to IEC 1000
801
For burst pulses and fast transients
Injection into signal and data cables,
plus AC line and DC power supply
cables
-4
CDN300
3 Phase
-4-
4 /
Fast Transient / Burst Generator
Conforms to IEC 801-4; IEC 1000
Test voltages up to 4400V
Burst frequencies up to 10KHz
Single pulse capability
Integrated coupling network
Technical Specifications
Pulse amplitude: 225V; 4400V (off-load)
Polarity: Pos. or neg. selectable
Pulse rise time: 5ns ± 20%
Pulse width: 50ns ± 30%
Burst frequency f Burst: 2,5/5/10kHz ± 10%
Burst duration t Burst: 15ms ± 20%
Burst repetition t Rep: 300ms ± 20%
Generator impedance: 50ohm ± 20% (dynamic)
Coupling network: as per IEC 801-4, built-in
Coupling mode: Press-button selection
asym, L1 > reference earth; L2 > reference earth; PE > reference earth; L1 + L2 >
ref. earth; L1 + L2 + PE > ref. earth
Inputs/Outputs:
* IEC equipment socket for the instrument supply
* 16A equipment plug for the test object supply
* Test object connection; country-specific mains socket - UL
* Gate function for Burst and 50Hz pulse: BNC, active 0
* Trig, function for single pulse: BNC, active 0, with LED
* Pulse output: HV coaxial connector
* Measurement output: BNC, 100:1 into 50 ohm
-4-4
Copyright © 1996-2006 | Advanced Test Equipment Rentals | All Rights Reserved
Loading...