Page 1
1 1 2 3
User Guide
BT1402G
BT1402R
Bluetooth speaker
Read these instructions. Keep these instructions.
Heed all warnings. Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install or operate near any heat sources such
as radiators, stoves, or other apparatus that produce
heat.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualied ser vice personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Warning: To reduce the risk of re or electrical shock,
do not expose this product to rain or moisture. The
product must not be exposed to dripping and splashing
and no object lled with liquids such as a vase of
owers should be placed on the product.
No naked ame sources such as candles should be
placed on the product.
Caution: Changes or modications not expressly
approved by the manufacturer could void the user’s
authority to operate this device.
Caution: Usage of controls or adjustments or
performance of procedures other than those specied
herein may result in hazardous exposure.
BATTERY CAUTIONS
The speaker uses batteries. The batteries shall not be
exposed to sunshine, re or the like.
Do not ser vice the internal battery. Have it examined
(and replaced if needed) by a competent ser vice
centre.
Discard used batteries in accordance with recycling
regulations in force in your area.
IMPORTANT
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, this
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
DECLARATION
Hereby Tesco Stores Ltd declares that this (Tesco
BT1402G/BT1402R) is in compliance with the essential
requirements and other relevant provisions of
directive 1999/5/EC. For a full copy of the Declaration
of Conformity for this product contact: Tesco Stores
Limited, Cheshunt, EN8 9SL.
The BT1402 is a compact, stereo Bluetooth
speaker that will conveniently link to your
mobile Bluetooth devices for playback of music
or to make hands-free phone calls.
The speaker is powered by internal batteries
that can be re-charged by connecting to a
standard USB outlet on a computer or to a USB
charger (not supplied).
The controls include touchpads to operate basic
functions of your Bluetooth source.
An AUX IN input is also available to connect to
personal audio players, computers etc that are
not equipped with a Bluetooth wireless system.
This symbol indicates that there are important
operating and maintenance instructions in
the literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
IMPORTANT SAFETY INFORMATION
CONTROLS AND CONNECTIONSINTRODUCTION
UNPACKING
Carefully unpack the unit. If it is damaged,
please return it to your nearest Tesco store for
replacement. Remember to take your purchase
receipt with you.
Retain the User Handbook. If you pass the unit
on to a third party, make sure you pass on the
handbook.
We suggest you retain the packaging. If you
dispose of it, do so having regard to any
recycling regulations in your area.
PRELIMINARIES
FRONT VIEW
BACK VIEW
COMPATIBILITY
NOTE: The BT1402 is compatible with Bluetooth
devices using V2.1 technology or later.
The speaker may not function correctly when
used with devices that use Bluetooth technology
earlier than V2.0.
CONTENTS
The carton should contain:
The BT1402 Bluetooth speaker•
USB charging cable•
Operating Manual•
If any items are missing or damaged, contact
your nearest TESCO store for a replacement.
Have your receipt ready when you call. Retain
the packaging. If you dispose of it, do so having
regard to any recycling regulations in your area.
LOCATION
Place the unit on dry stable surface away from
heat and damp and where it is unlikely to fall or
be knocked over.
a
b
c
d
e
f
g
a
b
c
Bluetooth/charge 1.
indicator
Microphone2.
O/On switch1.
DC IN jack2.
Aux In jack3.
Previous touchpad3.
Volume down touchpad4.
Play/Pause/Answer touchpad5.
Volume up touchpad6.
Next touchpad7.
Page 2
4 5 6 7
UK: Waste electrical products/
batteries should not be disposed
of with household waste. Separate
disposal facilities exist, for your
nearest facilities see www.recyclemore.co.uk or in-store for details.
ROI: Produced after 13th August
2005. Waste electrical products/
batteries should not be disposed
of with household waste. Please
recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
Tesco Stores Ltd,
Delamare Road, Cheshunt, Herts, EN8 9SL
The speaker can be powered by the internal
rechargeable batteries or via the USB cable
(supplied), connected to the USB jack of a
computer or a USB charger (not supplied).
Connecting USB power
Connect the micro-USB jack to the DC IN 5V •
jack on the back panel.
Connect the USB jack to a computer or a 5V •
USB AC adaptor.
To turn the speaker on
Slide the OFF/ON switch to the ON position.•
The speaker will beep and the Bluetooth/Charge
indicator light will ash while searching for the
last connected Bluetooth device.
If this device is found within 20 seconds, it will
re-connect.
If it is not found, the speaker will be visible for
connection to other Bluetooth sources.
Before playing your speaker it must be paired
and connected to the Bluetooth source you are
using. This may be a mobile phone or Bluetooth
equipped laptop etc.
Pairing with a Bluetooth device
Switch on the speaker.•
The Bluetooth/Charge indicator light will ash.
Activate Bluetooth on the source.•
If the source is a phone, Bluetooth will normally
be activated in the connectivity section of the
settings menu.
If the source is a computer, Bluetooth settings
should be found in the Control Panel.
In the Bluetooth menu of the source, there •
should be an option to search for Bluetooth
devices. Select this option.
The source will now scan for other B luetooth
devices and should nd the speaker, identied as
‘TescoBT1402’.
Touchpad operation
The top panel controls are touchpads. To operate
the controls, touch the pads with your nger.
There is no need to press them hard.
Mobile phones
Once the speaker is connected to your phone,
the sound should switch from your phone to
the speaker. You can now play music from your
phone via the speaker or receive hands-free
calls. Speak clearly, close to the microphone on
the top panel when making a phone call.
Laptop computers
Once the speaker is connected to your laptop,
you may need to open the sound menu and
select the speaker as your preferred sound
device. Once this is done, you can play music
from your laptop.
The Aux In jack may be used to connect sources
that do not have Bluetooth connectivity.
NOTE: Aux in sources can only play through the
speaker. The microphone and playback controls
will not function for phone calls etc.
Aux in sources may include -
Personal audio players•
Personal computers or laptops•
Connecting to the Aux In jack
Connect a stereo 3.5mm jack cable (not •
supplied) between the headphone or LINE/
AUX output of the personal audio player and
the AUX IN jack on the back panel.
To ensure maximum life from the batteries in
your speaker, follow these guidelines:
Discharge the batteries completely twice •
a year.
If the speaker hasn’t been used for a long •
period of time, discharge the batteries
completely, then fully charge them for 4
hours before use.
No power
The battery may be at. Connect the •
speaker to a USB power source to charge it.
Unable to pair with the speaker
Check if the Bluetooth/Charge indicator is •
ashing. If not switch o the power, then
switch back on and re-try.
Insucient volume when playing an Aux In
source
Try increasing the volume setting at the •
source.
All care and cleaning operations should be
carried out with the unit unplugged from the
mains power.
The surface of the unit can be cleaned with a
barely damp cloth and then dried carefully.
Never use abrasives, abrasive cloths or chemical
solvents .
POWER SUPPLY POWER CONTROL
BATTERY CARE
OPERATION
BLUETOOTH PAIRING AND CONNECTION
TROUBLESHOOTING
AUX IN
SPECIFICATIONS
CARE AND MAINTENANCE
DISPOSAL
WARRANTY
Charging the batteries
When power is connected, the internal batteries
will begin to charge and the B luetooth/Charge
indicator will light red.
When the batteries are fully charged, the
Bluetooth/Charge indicator will switch o.
Low battery warning
When the batteries are nearly exhausted,
the speaker will beep. The speaker should be
charged as soon as possible.
If the batteries are completely exhausted,
charge the speaker for at least 4 hours.
NOTE: The battery will charge whether the
speaker is switched on or o.
To turn the speaker o
Slide the OFF/ON switch to the OFF •
position.
Choose to pair with this.•
If the device features Bluetooth technology earlier
than V2.1, you will be asked for a password.
If so, enter 0000.•
Your Bluetooth source will now be connected to the
speaker. Once connection has been established,
the speaker will beep and the Bluetooth/Charge
indicator will ash slowly.
After pairing for the rst time, the speaker will
appear in the connection menu of your Bluetooth
device.
Re-connecting
Your device and the speaker should re-connect
when next used if no other device has been
connected to the speaker.
Disconnecting
To disconnect from a Bluetooth deivice,
Touch and hold the •
pad for 3
seconds.
The speaker will beep.
The connected device will be disconnected and
the Bluetooth/Charge indicator will ash.
Volume control
Touch and hold the • + pad on the control
panel to turn the volume up.
Touch and hold the • - pad on the control
panel to turn the volume down.
Playback control
You can use the touchpads on the control panel
to control the source.
Touch the •
pad to switch the source
between play and pause.
Touch the • } pad to select the next track.
Touch the • { pad to select the previous
track.
Making phone calls
If you receive a call, touch the •
pad to
answer the call.
Touch the •
pad again when you want
to hang up.
NOTE: The Aux source will be automatically
selected when a cable is connected.
Set your personal audio player/computer •
to PLAY.
Set the listening volume to the level you want •
with the volume control on the source.
NOTE: The volume controls on the speaker are
disabled when playing from an AUX source.
When you have nished listening to the •
Aux in source, disconnect the cable and
Bluetooth audio will be re-selected.
Supply Voltage, Current : .......5V
, 500mA
Bluetooth version ..................4.0+A2DP
Net Weight: ...........................0.27 kg
Your Tesco appliance is covered by a warranty
for 12 months from the date of purchase. If
a fault develops during this period, please
contact the TESCO electrical help line. Please
have your original purchase receipt with you
when you call. This warranty in no way aects
your consumer rights.
Tesco Helplines:
Landlines 0800 323 4060 (Freephone from a BT
landline).
Mobiles 0330 123 4060 (Calls cost no more than
calls to geographic numbers eg. 01 or 02 and
are included in inclusive minutes and discount
schemes).
Never charge the speaker for more than 24 •
hours.
Never recharge the battery in a temperature •
below 0°C.
Avoid recharging the batter y in direct •
sunlight or near a radiating heat source.
BT1402G/BT1402R V0.5
Loading...