Contents
EN-1 Digital LCD Television Instruction Manual
Contents
Safety Warnings 2
WELCOME .............................................................2
IMPORTANT INFORMATION ................................ 2
About your LCD TV 5
GET TO KNOW YOUR TV ....................................... 5
Front control panel ...............................................................5
Rear Terminals Control ........................................................5
GET TO KNOW YOUR TV WITH DVD ....................6
Front control panel ...............................................................6
Rear Terminals Control ........................................................6
GET TO KNOW YOUR REMOTE CONTROL ...........7
CONNECTING YOUR TV ........................................ 8
ANTENNA CONNECTION ....................................................8
IMPROVE YOUR SIGNAL ......................................................8
CONNECT YOUR PC TO THE TV .........................................8
CONNECT A DVD PLAYER TO YOUR TV .......................... 8
CONNECT A DVD PLAYER OR VCR TO YOUR TV ..........8
Connection Option 1 ...........................................................8
Connection Option 2 ...........................................................8
SCART INPUT ........................................................................... 8
HDMI INPUT .............................................................................9
MOUNT YOUR TV ONTO THE WALL ................................. 9
PREPARATION OF YOUR REMOTE CONTROL ......9
BATTERY INSTALLATION ...................................................... 9
BATTERY CAUTION ................................................................ 9
Getting Started 9
Setting up ............................................................. 9
LOCATION................................................................................. 9
CONNECTION ..........................................................................9
SWITCHING YOUR TV ON ..................................................10
TUNING YOUR TV ............................................... 10
SWITCHING TO AN EXTERNAL SOURCE OTHER
THAT TV ...................................................................................10
AUTO SEARCH .......................................................................10
DIGITAL MANUAL SEARCH ...............................................10
Analog Manual Search ......................................................11
Channel Edit ..........................................................................11
RENAME ..................................................................................12
MOVE .......................................................................................12
Setting favourite channel .................................................12
SKIP ...........................................................................................12
GUIDE (Electronic Program Guide) ...............................12
COMMON INTERFACE ........................................13
Software Update function ...............................................13
Operation ...............................................................................14
USING YOUR TV ..................................................14
How to select the TV program ........................................14
HOW to adjust volume ......................................................14
CH.LIST function ..................................................................15
ADJUSTING PICTURE SETTINGS ....................... 15
Changing the Picture Setting .........................................15
ADJUSTING SOUND SETTINGS ......................... 15
Changing the Sound Setting ..........................................15
FUNCTION SETTINGS ......................................... 16
TIME SETTINGS .................................................. 17
LOCK MENU SETTING ........................................19
SHORTCUT MENU DISPLAY ...............................20
Using the features 22
Teletext functions .............................................. 22
Teletext....................................................................................22
USB MODE .......................................................... 23
TO USE THE USB DEVICE ...................................................23
When connecting/removing the USB device ...........23
Operating the USB device ................................................24
Playing a Picture ..................................................................24
Playing Music ........................................................................24
Playing a Movie ....................................................................25
Text ...........................................................................................25
Using External USB Disk For Recording ...........25
TIME SHIFT .............................................................................26
RECORDING ...........................................................................26
USING YOUR DVD PLAYER
(certain models only) ........................................ 27
ADDITIONAL DVD FUNCTIONS ......................... 28
Reference Sections 29
TROUBLESHOOTING ..........................................29
Specification ......................................................29
SCREEN SECTION .................................................................29
TV/VIDEO SECTION .............................................................30
GENERAL SECTION .............................................................30
Safety Warnings
Digital LCD Television Instruction Manual EN-2
Safety Warnings
WELCOME
Thanks for buying this 32"/42" HD Ready Digital LCD TV. This guide will help you set up and begin using your TV.
First, check the contents of your box with the parts checklist below:
32"/42" HD
Ready Digital LCD TV•
Remote control•
AAA b
attery • ×2
Instruction Manual•
Now you can get started!
IMPORTANT INFORMATION
WARNING
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*I
f necessary, please contact authorized after-sales services.
could result in serious injury by high voltage.
*An exclamatio
n mark in a triangle: Major part or accessory of which technical
must be followed i t is to be replaced.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
f i
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
CAUTION: ▲ Please read this manual carefully before using your television and keep this manual in a
good place for future reference.
▲ To achieve the best performance of your television, read this User‘s Manual carefully and
properly store it for future reference.
▲ Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
CAUTION:
▲ Unauthorized disassembly of this product is prohibited.
Safety Warningss
EN-3 Digital LCD Television Instruction Manual
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Do not locate the product close to water
or oil, which may cause fire hazards.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
The product must be placed on a solid and
stable surface to avoid collapse.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
Safety Warnings
Digital LCD Television Instruction Manual EN-4
Don‘t use or store inflammable materials
near the product to avoid explosion or fire
hazards.
Don’t place the product in a humid area to
avoid fire hazards.
The antenna of the product should be away
from electric cable to avoid
electric shocks.
Never touch the plug when your hand is wet
as this might cause electric shocks.
Always make sure that the televisionis well
plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water
from flowing down
along the cable into
the television.
Unplug the television, use soft fabric, never
chemicals, if you are going to make
cleaning of the product.
Make sure that no
water drops in the
product.
The plug and electric cable must be kept
clean to avoid electric
shocks or fire
hazards.
Disconnect the television from power supply
and antenna when there is a
rainstorm or thunderstorm
to avoid electric shocks
or fire hazards.
Disconnect the television from power supply
to avoid electric shocks or fire
hazards in a long
vocation.
About your LCD TV
EN-5
Digital LCD Television Instruction Manual
About your LCD TV
GET TO KNOW YOUR TV
Front control panel
Rear
Terminals Control
1
YP
bPr input
2
YP
bPr AUDIO input
3
DVI
AUDIO
input
4
ANTENNA input
5
HDMI3
input
6
S- VIDEO input
7
EARPHONE
output
8
HDMI1 input
9
HDMI2
input
0
AV-VIDEO input
A
Common In
t
e
r
face
B
SCART1
input
C
VGA
AUDIO input
D
SCART2
input
E
VGA input
F
USB
G
OPTI
CAL
B
S
U
2
1
C
ER
N
I
T
N
E
N
O
PM
O
C
3
I
M
D
H
V
G
I
A
N
N
A
I
T
N
1
2
3
4
G
5
6789
0
A
B
C D E
F
CSH09G0685_EN.indd ••1:5CSH09G0685_EN.indd ••1:5 2009-8-14 19:40:432009-8-14 19:40:43
Standb y
Program u p/d own button
Volume up /do wn b utt on
Menu b utt on
Source bu tto n
GET TO KNOW YOUR TV WITH DVD
Front control panel
Standby
Rear Terminals Control
About your LCD TV
YP
bPr input
1
YPbPr AUDIO input
2
DVI AUDIO
3
ANTENNA input
4
HDMI3
5
S-VIDEO input
6
EARPHONE
7
HDMI1 input
8
HDMI2
9
input
input
output
input
AV-VIDEO input
0
Common Interface
A
SCART1
B
VGA AUDIO input
C
SCART2
D
VGA input
E
USB
F
OPTICAL
G
Digital LCD Television Instruction Manual EN-6
input
input
About your LCD TV
EN-7 Digital LCD Television Instruction Manual
GET TO KNOW YOUR REMOTE CONTROL
When using the remote control, aim it towards the remote sensor on the TV.
1
Stand By
2
DVD Menu / REC
3
DVD open / close
4
Picture Mode
5
Sound Mode
6
Call Screen Display
7
Sleep button
8
DTV Audio / NICAM / DVD Audio
9
Aspect Ratio Control button
0
Channel list button
A
Subtitle button
B
Program Number Channel selection
C
Source Exchange
D
Q.VIEW / Swap Channel
E
V+/V-: Volume selection
F
P+/P-: Channel selection
G
Mute
H
Menu button
I
GUIDE button (only for DTV)
J
Favourite list button
K
OK button
L
Cursor Mover button
M
Back button (only for USB)
N
Exit Screen Display
O
REPEAT (only for DVD, USB, REC & Timeshift)/CANCEL button
P
Zoom (only for DVD & USB)/Teletext index (only for TV) / REC index
Q
Play / Pause button (only for DVD & USB) / Timeshift
R
Stop (only for DVD, USB, REC & Timeshift)
S
Fast Reverse (only for DVD, USB, REC & Timeshift)
T
Fast Forward (only for DVD, USB, REC & Timeshift)
U
Previous (only for DVD, USB, REC & Timeshift)
V
Next (only for DVD, USB, REC & Timeshift)
W
DVD Set up / Text
X
DVD Title / Teletext Mix
Y
DVD Search / Teletext Subcode
Z
DVD 10+ / Teletext Hold
[
DVD Program / Teletext Reveal
\
DVD A-B Repeat / Teletext Size
]
DVD Call / Teletext Mode
`
DVD Angle/Teletext Time
Note
RED button, GREEN button, ❏ BLUE
button and YELLOW button are fast
text button in analog signal. Function
button in DVBT (just reference the
OSD)
About your LCD TV
Digital LCD Television Instruction Manual EN-8
CONNECTING YOUR
TV
ANTENNA CONNECTION
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
Read your computer user guide and check it has a
A
VGA connector.
Turn the power o on your TV and PC.
B
Connect a D type 15-pin VGA interface cable to the C
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Turn on the power of the TV firstly and then the PC.
D
Press the button on the TV or TV remote control to E
set the video input mode to VGA.
Once the image shows, if there is noise present,
F
change the VGA mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
CONNECT A DVD PLAYER TO YOUR
TV
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, Pb, Pr) IN socket on your TV.
Turn on the DVD player and insert a DVD.A
Press the button to select .B
Refer to the DVD player user guide for operating C
instructions.
DVD
CONNECT A DVD PLAYER OR VCR TO
YOUR TV
There are two ways in which you can connect a DVD
player or VCR to your TV. Make sure that both the TV and
DVD player or VCR are switched o before you connect
them.
Connection Option 1
Connect the audio and S-VIDEO cables from the VCR A
output jacks to the TV input jacks.
Insert a video tape into the VCR and press
B PLAY on
the VCR.
Turn on the power of the TV first, then the VCR.
C
Press theD SOURCE button on the TV to set the video
input mode to S-VIDEO.
Connection Option 2
Connect the AV DVD/VCR outputs to the AV IN A
socket on your TV.
Press the
B SOURCE button on the TV to set the video
input mode to AV.
SCART INPUT
Connect the scart lead from the external device A
(DVD player, Set-top box or games console) to the
TV scart socket.
About your LCD TV
EN-9 Digital LCD Television Instruction Manual
Press theB SOURCE button to select SCART mode.
Press the
C PLAY button on the external device.
HDMI INPUT
Connect the cable from the HDMI device to the TV A
HDMI socket.
Press the
B SOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
C
operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
PREPARATION OF
YOUR REMOTE
CONTROL
BATTERY INSTALLATION
Place the remote control face down, then open the A
cover of the battery compartment.
Install two AAA batteries. (The + and - symbol of the B
battery must match with the marks on the remote).
Close the cover of the battery compartment.C
BATTERY CAUTION
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a
damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
for a period of time, remove the batteries from the
remote control.
Getting Started
Setting up
LOCATION
You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.
CONNECTION
Insert your TV aerial lead into the Antenna input at A
the side of the TV.
Insert the batteries into the remote control. Make
B
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.
About your LCD TV / Getting Started
Getting Started
Digital LCD Television Instruction Manual EN-10
SWITCHING YOUR TV ON
Press the A STANDBY button on the right side of the
TV once. A red ashing light will appear in the corner
of the screen.
Press
B STANDBY on the remote control. The TV will
turn on and the red light will turn blue. This may take
a few moments.
Select your chosen language when prompted from
C
the list that will appear on screen. Use the button
to scroll to the language you want and press to
confirm.
TUNING YOUR TV
SWITCHING TO AN EXTERNAL
SOURCE OTHER THAT TV
If you have attached a DVD player or similar external
device to the TV, you will need to tell the TV to display
the content from it. Simply press SOURCE which will
bring up the source menu in the left corner of the screen,
use the 5 and button to highlight the required
source and press OK select.
For details of how to plug in other equipment see GET
TO KNOW YOUR TV on page 5.
AUTO SEARCH
Press A MENU button.
Press B 3 button to select Tuning menu, press
button to enter.
Press
C 5 button to select Country item.
Press 3 button to select you needed.
Press
D 5 button to select Auto Search item, press
OK button to enter.
Press 3 button to select the OK option, and press
OK button to start searching.
Press the MENU button, you can choose to skip the
TV /DTV Search or not.
Press E EXIT button to stop auto search during
searching.
Note
It may take a few moments to complete the Auto ❏
Search.
DIGITAL MANUAL SEARCH
Press A MENU button.
（8JUIPVU%7%）
8JUI%7%
Getting Started
EN-11 Digital LCD Television Instruction Manual
Press B 3 button to select Tuning menu, press
button to enter.
Press
C 5 button to select Digital Manual Search
item, press button to enter.
Press D 3 button to select the Channel.
Press OK button to start searching.
Once a channel is located, you can press
E OK button
to save it.
Press EXIT button to exit.
Analog Manual Search
Follow the below steps when you need to have a manual
search.
Press
A MENU button.
Press B 3 button to select Tuning menu, press
button to enter.
Press
C 5 button to select Analog Manual Search
item, press button to enter.
Press D 5 button to select Search item, press
button is used to select the higher frequency
channel.
Press 3 button is used to select the lower frequency
channel.
And then select Storage To, press
E 3 button to
select the position number you want the channel
on. Once a channel is located, you can press red
button to save it. Press EXIT button to exit.
Sound System ❖
Press 5button to select “Sound System”, then
press 3 button to select the correct sound system.
Current CH ❖
Press 3 button to select the channel number to
edit.
Storage To ❖
Press 3 button to select the program number you
want to storage to.
Fine tune ❖
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
Repeat above steps
A A-C, then press 5button to
select the Fine Tune item.
Press
B 3 button repeatedly to carry out fine
tune, till the best picture and sound are obtained,
then loosen the button.
Channel Edit
Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.
Press
A MENU button.
Getting Started
Digital LCD Television Instruction Manual EN-12
Press B 3 button to select TUNING menu, press
button to enter.
Press
C 5 button to select CHANNEL EDIT item.
Press button to enter the sub-menu. You can
press red, green, yellow or blue button to enter the
menu you need.
RENAME
Press A 5 button to select the channel, and press
green button to rename.
Press
B 3 button to select the number position of
channel name. Press 5 button to select number.
You can press the
C EXIT button to cancel the changes
at anytime.
Note
The RENAME function is only available in ATV ❏
program.
MOVE
Press A 5 button to select the channel and press
yellow button to select the position.
Press B 5 button to select the number position you
want to remove to, press yellow button to confirm.
You can press the
C EXIT button to cancel the changes
at anytime.
Setting favourite channel
Press A 5 button to select the channel, press red
button to set your favourite channel.
You can press the red button to cancel the changes
B
at anytime.
Press
C FAV button on the remote control and
Favourite List will be displayed.
Press
D 5 button to select the channel, and press
OK button to enter.
SKIP
PressA 5 button to select the channel and press
blue button to skip the current channel.
You can press the
B blue button to cancel the changes
at anytime.
GUIDE (Electronic Program Guide)
Using this function, you can access the DTV program
information.
Press
A MENU button.
Press B 3 button to select TUNING menu.
Press button to enter.
Getting Started
EN-13 Digital LCD Television Instruction Manual
PressC 5 button to select the guide item.
Press OK button to enter the submenu, the
electronic program guide is displayed.
You can quickly call up Guide menu by GUIDE
button on the remote control.
Note
Only DTV mode. ❏
COMMON INTERFACE
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.
Warning
Switch o your TV before any module is inserted in •
the Common Interface slot.
Insert the CAM correctly, then Smart Card to the CI A
slot that is located at the side of the TV.
CI Slot
CAM
Smart Card
Turn on the TV and it will display the below message B
if the CA module is detected. Wait for few moments
until the card is activated.
Press the
C MENU button to display the Main Menu
and use the 5 and button to highlight the
“Common Interface” line and press the “OK” button.
Detailed information on the CI card in use is
D
displayed.
Press
E OK button to access the card menu. Refer to
the module instruction manual for setting details.
When module is removed, the following message
F
will appear on the screen.
Software Update function
When you get the updating news from the TV shop’s •
web, you can update the operating software using
the Download menu. The data for various units are
transferred consecutively on a special receiving
channel.
You need to search the channel with updating code •
stream.
Getting Started
Digital LCD Television Instruction Manual EN-14
Note
You can get information from the TV shop or ❏
internet.
Operation
Press A MENU button.
Press B 3 button to select TUNING menu, press
button to enter.
Press
C 5 button to select Software Upgrade item.
Press
D 3 button to set it as On. (The default is O )
The Start Upgrade item can be selected.(The default
E
is grey and cannot be selected).
13%
Press EXIT to cancel download
Press F 5 button to select the Start Upgrade option
and use OK button to enter. Then the TV will restart
and search the upgrade information.
Note
If the upgrade information is received, the TV will ❏
begin to upgrade. Or else, the TV will be back the
DTV source.
Load the receiver identification. This process may
G
also take several minutes. You can press EXIT button
to cancel the download and your TV set will be back
the DTV source.
100%
15%
Press EXIT to cancel download
Updating in progress - Do not turn off the TV
After the download has finished, your TV set will H
enter burning state and the indicator light is shining.
The menu 4 of right appears.
The set will be back the DTV source when the update is
completed.
USING YOUR TV
How to select the TV program
Using Program number button Enter the channel A
number with the number keypad on the remote
control.
Using
B P+/P- button.
Press the P+/P- button to select a channel number.
HOW to adjust volume
Press V+/V- button on the remote control or the side of
the TV to adjust the volume level.
Getting Started
EN-15 Digital LCD Television Instruction Manual
CH.LIST function
Press CH.LIST button on the remote control will display
Channel List menu, and then press button to enter.
Press5 button to select the channel, and then press
OK button to enter.
ADJUSTING PICTURE
SETTINGS
Changing the Picture Setting
Press A MENU button.
Press B 3 button to select Picture menu, press
button to enter.
Press
C 5 button to select the item requires
adjusting.
Press
D 3 button to adjust the selection item.
When you are satisfied with your choice, press the
E
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Contrast ❖
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness ❖
This will adjust the light output of the complete
picture, which will mainly aect the darker areas of
the picture.
Colour ❖
This will adjust the saturation level of the colours to
suit your personal preference.
Sharpness ❖
This will adjust the sharpness of fine details in the
picture.
Tint ❖
Allows you to select the colour mix (Tint) of the
picture.
Note
The Tint function is only available in NTSC mode. ❏
Mode ❖
This will select the picture mode. Select Standard/
Mild/User/Vivid according to the program. You can
quickly select the desired mode by P.MODE button on
the remote control.
Colour temperature ❖
This will increase or decrease Warm (red) and Cool
(blue) colours to suit personal preferences.
Select Cool to give the white colour a blue tint,
Normal to give the white colour a neutral tint, Warm
to give the white colour a red tint.
Noise Reduction ❖
Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.
Select O/Low/Standard/High according to the
image noise.
Reset ❖
To recover to the default value.
ADJUSTING SOUND
SETTINGS
Changing the Sound Setting
Press A MENU button.
Getting Started
Digital LCD Television Instruction Manual EN-16
PressB 3 button to select Sound menu, press
button to enter.
Press
C 5 button to select the item requires
adjusting.
Press
D 3 button to adjust the selection item.
When you are satisfied with your choice, press the
E
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Balance ❖
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
Mode ❖
This will select the sound mode.
Press 3 button to select Standard/Music/
Theater/User according to the program. You can
quickly select the desired mode by S.MODE button
on the remote control.
AVL ❖ (Automatic volume control)
This will reduces the dierences in volume level
among broadcasters.
SRS TS XT ❖
This will control the Woofer output.
Press 5 button to select SRS TS XT.
Press 3 button to set SRS TS XT as OFF, ON.
Digital Audio Output ❖
This will control the Digital Audio Output.
Press button to select Digital Audio Output.,
Press button to set Digital Audio Output. as OFF,
PCM,RAW.
Equalizer ❖
This sound setting can be adjusted to suit your
personal preference.
Audio Languages ❖
Press 5 button to select Primary/Secondary item,
and then press 3 button to select the languages
you needed.
Press button to select Close item, press OK button
to close it.
Note
The Audio Language function is only available in ❏
DTV mode.
Reset ❖
To recover to the default menu setting.
FUNCTION SETTINGS
Press A MENU button.
PressB 3 button to select Sound menu, press
button to enter.
Getting Started
EN-17 Digital LCD Television Instruction Manual
Press C 5 button to select the item requires adjusting.
PressD 3 button to adjust the selection item.
When you are satisfied with your choice, press the
E
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Language ❖
To select the menu language.
Subtitle Language ❖
To select the Subtitle language.
Display Mode ❖
To set the picture proportion, press3 button to
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by SCREEN button
on the remote control.
4:3 mode •
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
16:9 mode •
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
Zoom1 •
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom2 •
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade o between
alteration and screen coverage.
Wide •
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration, at bottom side.
Blue Screen ❖
This will select the character background colour.
Note
The Blue Screen function is only available for ❏
ATV mode.
Recorder ❖
To recorder the DTV program. Details of Recorder are
described in the page of 25, 26.
SCART Input ❖
When you use the SCART2 input ,make sure the input
source is AV or S-VIDEO, and set the SCART INPUT
option.
OSD Time Out ❖
To set how long you want the menus to appear
on-screen. Each press of 3 button repeatedly to
select the number of preset minutes, the Time will be
set in sequence: o, 10sec, 15sec, 30sec, 45sec, 60sec.
OSD Transparency ❖
To set the transparency background of OSD, the
transparency will be set in sequence: O, 25%, 50%,
75%, 100%.
Reset ❖
To recover to the default value.
TIME SETTINGS
Clock ❖
Press A MENU button.
Press
B 3 button to select Time menu, press
button to enter.
Getting Started
Digital LCD Television Instruction Manual EN-18
Press
C 5 button to select Clock item, press
button to enter setting.
Press 5 button to select hour or minute, press
3 button to adjust the value.
Date ❖
Press A MENU button.
Press
B 3 button to select Time menu, press
button to enter.
Press C 5 button to select Date item, press
button to enter setting.
Press5 button to select the option, and then
press 3 button to adjust value.
Note
In DTV mode, because the time information is ❏
from the signal, the Clock and Date are not able
to be changed.
If you want to change the time, turn o the TV in
ATV mode, then turn on the TV.
O Time ❖
Press A MENU button.
Press
B 3 button to select Time menu, press
button to enter.
Press C 5 button to select O Time item, press
button to enter setting.
Press 5 button to select Repeat option, and
then pressbutton to set it on.
Press5 button to select hour or minute, press
3 button to adjust the value.
When the o time has arrived, the TV set will
enter into standby mode.
On Time ❖
Press A MENU button.
Press
B 3 button to select Time menu, press
button to enter.
Press C 5 button to select On Time item, press
button to enter setting.
Press 5 button to select activate option, and
then pressbutton to set it On.
Press 5 button to select hour or minute, press
3 button to adjust the value.
When the on time has arrived, the TV set will
switch on automatically.
Sleep ❖
The sleep timer automatically shuts o the TV after a
preset time (from 5 to 240 minutes).
Getting Started
EN-19
Digital LCD Television Instruction Manual
Press the MENU button and then use button
to select the Time menu.
Press the
button and then use button to
sele
ct the Sleep.
Press the
button and then use button
to select the number of minutes. Select Off, 5Min,
10
Min, 15Min, 30Min, 45Min, 60Min, 90Min,
120
Min, 180Min, 240Min.
When you are satisfied with your choice, press
MENU button to return to the previous menu or
press the EXIT button to return to TV viewing.
And the time begins to count down from the
number of minu
tes selected.
Time Zone?
Press MENU button.
Press
button to select Time menu, press
but
ton to enter.
Press
button to select Time Zone item.
Press
button to select the correct time zone.
Press
MENU button to save and exit.
LOCK MENU SETTING
Using this function can control the tuner, program,
source volume and so on. Pressing MENU on the remote
control, press button to select Lock menu, press
but
ton to enter the sub-menu, and you will be required
to enter the password. The initial password of the
television is 0000.
CHANGE PASSWORD?
Press button to select Change Password
item. Press button to enter the submenu.
When you have inputted the four digits you will
be prompted to enter it again.
Your new password will then be automatically
saved.
CHILD LOCK?
Press button to select Child Lock.
Press button to set On or Off mode. If lock on
mode is se
t, Child Lock is in activated automatically.
In such case, if Child Lock button (button on the
television) is pressed, the screen will display Child
Lock, which can be erased by press of MENU button.
5 se
conds later after the latest press, the screen
displ
ay will disappear automatically. The Child Lock
mode can be
resumed by entering Lock Set menu, set
Child
Lock On or Off.
Tuning Lock?
Press to select Tuner Lock and to set On/Off.
(To set On, some operation such as search will be not
available. When enter the Tuning menu, Tuner Lock
will be on the sc
reen. If you want to operate Tuning
menu, you need to enter the Lock menu to set Tuner
Lock Off or operate unlock.)
Getting Started
Digital LCD Television Instruction Manual EN-20
Channel NO. ❖
Channel NO. is opted for setting up preset channel.
Press 5 button to select preset Channel. Press 3
button to select channel number.
Source set ❖
Channel set is opted for setting up start source.
Press 3 button to select O, DTV, TV, AV, SCART1,
SCART2, S-Video, Component1, Component2, PC,
HDMI1, HDMI2, HDMI3, USB in turn. DVD is available
for some model.
Source Lock ❖
Source Lock will control the On or O of hinder
external input modes.
Press 3 button to set as on or o.
When the source lock is set as on, TV source will
display, at this time, when press SOURCE button,
the TV can switch to corresponding source and will
display the Source is locked.
Max Volume ❖
Press 5 button to select Max Volume. Press 3
button for adjustment between 0-100. If a certain
Value is set, when volume is being adjusted, the
sound value can not exceed maximum volume value.
If current volume is over Max Volume, when lock set
menu is set, current volume will become set maximum
volume, if current volume is below maximum volume,
customer set volume will stay unchanged.
Initial Volume ❖
The TV will remember it after your setting, that will be
the volume when turn on the TV next time.
Parental Lock ❖
Press 5 button to select parental lock. Press 3
button to select OFF or 4-18 to limit the age of
children who will watch TV.
Clear Lock ❖
Press 5 button to select Unlock mode. Press 3
button to unlock all set modes, setting all lock options
to o, and the maximum volume returns to 100.
SHORTCUT MENU
DISPLAY
Subtitle Function ❖
Press A SUBTITLE button on the remote control will
display Subtitle languages menu, press button
to enter.
Press B 5 button to select the item and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
Note
Press ❏ SUBTITLE button on the remote, it will
display subtitle languages menu only in the DTV
mode.
CH.LIST Function ❖
Press A CH.LIST button on the remote control, will
display Channel List menu.
Press
B 5 button to select the channel and press
OK button to enter. You can press the EXIT button
to cancel the changes at anytime.
GUIDE Function ❖
Press GUIDE button on the remote control, will
display Program Guide menu, press 53button
to select the program.
Getting Started
EN-21 Digital LCD Television Instruction Manual
You can press the EXIT button to cancel the changes
at anytime.
Note
Av ❏ ailable only in the DTV mode.
FAV Function ❖
Press FAV button on the remote control, will display
Favourite List menu.
Press 5 button to select program and press OK
button to enter. You can press the EXIT button to
cancel the changes at anytime.
INFO ❖
Press INFO button on the remote control, will display
the current channel information.
You can press the EXIT button to cancel the changes
at anytime.
AUDIO/I/II ❖
Press AUDIO button on the remote control, will
display Audio Languages menu.
Press 5 button to select the desired settings and
press OK button to enter.
You can press the EXIT button to cancel the changes
at anytime.
Note
Press ❏ AUDIO button on the remote, it will
display Audio Languages menu only in the DTV
mode.
Eliminate Sound ❖
When you need to pay attention to surrounded
sounds, or there is a telephone calling you
or there are some guests visiting you, the sound
elimination (mute) function is very convenient.
Press the
A MUTE button on the remote control and
“Mute” type face will display on the lower part of
the screen. At this Time, the sound of the TV set is
turned o.
If you want to recover the sound, press the
B MUTE
button again or directly press V+ button.
Quick program view ❖
This function enables quick swap to the last watched
program. Press Q.view button, and the TV will be back
to the TV source, expect in the USB and DVD source.
Suppose the channel number you used just now
A
is 8 and the channel number you are using is 18
(as shown in the figure).
If you want to return to the last watched program B
channel 8, you can simply press the Q.View button.
If you want to return to channel 18, press the C
button again. Use this function, you can easily
change between the channel you are using and
the channel you used last Timer.
Using the features
Digital LCD Television Instruction Manual EN-22
Using the features
Teletext functions
Teletext is an information system, broadcast by certain
channels, which can be read like a newspaper. It also
provides subtitles for people with hearing difficulties or
those who are unfamiliar with the language in which a
particular program is being broadcast (cable networks,
satellite channels, etc.).
Note
The ❏ teletext buttons could be working even if
there is no teletext signal, but there is no teletext
display.
Teletext
Teletext functions ❖
To select “teletext” press the button on the
handset. To switch o teletext, press the button again.
“Note all menu functions are not available in teletext
mode”. Only a few direct button control functions are
available in teletext mode, they are:
Volume adjustment •
Mute function •
Page up/down ❖
Use the P+/P- buttons to browse next or previous
page.
Page number entering ❖
To select a Teletext page, enter the page number
using the numeric key pad on the remote control,
or use the P+ or P- buttons, or the coloured Fast text
buttons.
Mix mode ❖
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the TV picture. Press this button again to return to
Full text.
INDEX ❖
Press the INDEX button to go to the index page of
teletext.
Language change ❖
Pressing the button will change the Teletext
characters between Eastern and Western.
Hold ❖
Pressing the button will stop the teletext page
automa tically updating. This feature is very useful
where there are several teletext pages or data on the
same page number.
Size ❖
Pressing the button changes between full screen
top half bottom half full screen. This feature is
very useful as it magnifies the image making the
characters easier to read.
Reveal ❖
Pressing the button will reveal hidden text. This
feature is used to reveal information such as answers
to Teletext on-line interactive puzzles.
Using the features
EN-23 Digital LCD Television Instruction Manual
Time ❖
While in normal TV mode only, pressing the button
will display the teletext time in the top right hand
corner for a few seconds.
Fast text coloured ❖ buttons
Fast text automatically displays the four most
commonly used pages that the broadcaster thinks
that you may want to choose next. Press the same
coloured button on the remote control as the
coloured link at the bottom of the teletext page to go
directly to that page.
Subcode ❖
Pressing the button by entering its 4-digit number
to enter a secondary page.
USB MODE
Note
The diagrams in the following section are ❏
schematic and only for your reference. Please see
the actual product if necessary.
TO USE THE USB DEVICE
Supported file formats:A
Photo: *.jpg;•
Music: *.mp3 files;•
Movie: *.avi files;•
TEXT: *.txt•
Note
Due to the particularity of file cording, some files ❏
may be unable to read.
Supported equipment: B
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT32, such
as some USB disks, mobile harddisks, and MP3
player. If USB equipment could not be identified
due to unsupported file system, please format the
equipment to the above-mentioned file system.
To achieve smooth playing, ensure the following:
C
The file code rate should be lower than 300KB/S;•
Due to the limitation of USB signal transmission •
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity •
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
When connecting/removing the USB
device
Press “A SOURCE” on the remote control unit to select
USB option.
Insert USB equipment into corresponding USB
B
interface 2s after starting the system.
After entering the system menu, press “
C 3/“ on the
remote control unit to select the require USB files,
press “OK” button to confirm the selection and enter
the file list relative to the selection.
Press D “5/“ on the remote control unit to select the
required file, press “OK” button to enter the selected file.
To exit the streaming media playing system and E
watch a TV program, you must press “BACK” button
to return to the streaming media main menu at first
(to protect equipment), and then press “SOURCE” to
select “TV” to return to the TV mode.
Note
Under source of USB, when ❑ press button MENU,
screen goes black, except when images or movies
are being played.
While playing the USB, press “ ❑ BACK” button
repeatly, the screen picture will return to USB
main interface, and only at this time you can
switch corresponding signal sources by pressing
“SOURCE” again.
Using the features
Digital LCD Television Instruction Manual EN-24
Please do not unplug the USB device when the ❑
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.
Operating the USB device
Press “A 5/“ to scroll through main menu or
submenu and select your desired option.
Press “
B OK” to confirm your selection.
Press “
C /“ to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
Press “
D PLAY/PAUSE” to play, and press it again to
pause playing.
Press “E ZOOM” to magnify pictures; when the picture is
enlarged, press “3/“ and “5/“ to move the picture.
Press “F STOP“ to stop playing, or return to the
previous menu, and press “BACK” repeatedly to
return to the main menu.
Note
You can choose the photos or music in dierent ❏
files to play together.
Playing a Picture
After entering USB main interface, press A “3/“ to
select “PHOTO” item.
Press ”
B OK“ to confirm the selection and enter the
picture file list.
Press C “5/“ to select the picture you want to play,
press ”OK“ to confirm, and then press “PLAY/PAUSE”
button to play the pictures.
If you want to pause the picture which is being D
palyed, press the PALY/PAUSE button again.
Press ”ZOOM“ to magnify the picture. When the
picture is enlarged, press “3/“ and “5/“ to
move the picture.
Press “PREV/NEXT“ to select the last or next picture.
Press “5/“ to rotate the picture.
Press “STOP
” to stop the picture being played.
To exit playing, just press “
E BACK” repeatedly.
Note
The menu display varies with the photo name and ❏
pixel in your equipment.
Playing Music
After entering USB main interface, press A “3/“ to
select “MUSIC”.
Press ”
B OK“ to confirm the selection and enter the
music file list.
Press C “5/“ and “OK” button to select the music
you want to play, then press “PLAY/PAUSE“ button
to play the music.
Press “
/“ to achieve the REV (fast back) and FWD
(fast forward) of the music being played.
Press “PREV/NEXT “ to select the last or next music.
Press “STOP
“ to stop the music being played,
when the current interface is the music being
played.
To return to the main menu, just press “
D BACK”
repeatedly.
Note
You can enjoy the music and the picture at the ❏
same time.
Using the features
EN-25 Digital LCD Television Instruction Manual
Playing a Movie
Atter entering USB main interface, press A “3/“ to
select “Movie”.
Press “
B OK” to confirm the selection and enter the
movie file list.
Press C “5/“ and “OK” button to select the movie
you want to play, and then press “PLAY/PAUSE”
button to play the movie.
Press “ZOOM” to magnify the picture.
Press “PREV/NEXT “ to select the last or next movie.
Press “STOP
“ to stop the movie being played.
To exit playing, just press “
D BACK” repeatedly.
Tex t
After entering USB main interface, press “A 3/“ to
select “Text” .
Press “
B OK” to confirm the selection and enter the
text file list.
Press “C 5/” and “OK” button to select the text you
want to play, and then press “PLAY/PAUSE” button
to play the text.
Press “PREV/NEXT “ to select the last or next text.
To exit the “Text”
D mode, just press “BACK” repeatedly.
Note
You can enjoy the music and the text at the same ❏
time.
Using External USB
Disk For Recording
Insert the USB device with FAT32 format into the A
USB1 connector. Then, press MENU button.
Note
Only USB1 is available for recording. ❏
Press
B 3 button to select FUNCTION menu, press
button to enter .
Press
C 5 button to select Recorder. Press OK
button to enter the submenu.
Press
D 5 button to Select Disk and press or OK
button to enter. Press 3 button to select disk if
your device has several disks.
Press
E 5 button to select Format and press to
enter. Press 3 button to select the size you want
to format. Press OK button to format the USB Disk.
Using the features
Digital LCD Television Instruction Manual EN-26
Note
The system will format the whole device and if your ❏
device size is bigger than 1GB, you can set the size
which is used for time shift.
Format may take several minutes and the time is
F
depending on the memory size. Press 3 button
to select the Time Shift Disk Size. The max device size
for Time Shift is 8GB. Then, press OK button to save.
Note
If you select all the size format for time shift, you ❏
can not do any recording.
Waiting for the system checking. And you can see
G
the speed data after the success checking.
Note
Only have to format when you use the device for ❏
record for the first time.
The minimum device size for record is 1GB. Provide ❏
device formatting function is up to 2TB. The max
Multi-Partition is 16 partitions and one is active at
a time.
Bit rate: ❏
Device bit-rate>4.5MB/s REC is safe at HD •
stream
Device bit-rate>1.5MB/s REC is safe at SD •
stream
Device bit • -rate<600KB/s REC is bad for REC
The system can not work normally if the USB ❏
device have the listing problem below:
The device has bug. •
The device has error block. •
The device reports the unfaithful size. •
IMPORTANT
USB device should be format as FAT32 format by •
your PC before insert to the USB connector.
TIME SHIFT
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the STOP button.
RECORDING
Press A D.MENU button to record the program being
played, and press D.MENU or EXIT button to make
the recording interface minimum.
Press B STOP button to stop the program recording
being played.
For Playback the recorded program. Press
C INDEX
button to open the recorded list.
Using the features
EN-27 Digital LCD Television Instruction Manual
Press 56 button to select the content you recorded.
Press the 4 button to display the program
information.
Press 3 button to cancel.
Press OK or PLAY/PAUSE button to play the
program recorded and press STOP button to stop it.
Note
Changing the channel will not inuence the •
recording in the same frequency, but will inuence
the time shift. When the recorded program is being
played, you can not delete it.
Press the • INDEX button repeatedly, the program
will be displayed in the order of program name,
channel name, program time, file name and file
length.
USING YOUR DVD
PLAYER
(certain models only)
PLAYING A DVD •
Press theA- SOURCE button on the remote control
to enter DVD mode.
Place the DVD in the disc slot with the DVD label
B-
facing away from you and the screen. The disc slot
will only take standard-sized DVD.
The DVD will automatically load; most begin with
C-
a disc menu.
Use the
D- 6,5,4 and 3 buttons to navigate
around the DVD menu to highlight the play
option and then press PLAY/PAUSE.
PAUSING A DVD •
Press A- PLAY/PAUSE to pause playback. The sound
will also be muted.
Press
B- PLAY/PAUSE to resume normal playback.
STOPPING A DVD •
Press the A- < button to stop playback of a DVD. The
TV screen will show the DVD start-up logo.
Some discs will remember the moment at which
B-
the DVD was stopped, so press PLAY/PAUSE to
recall the moment and continue playback.
Press the
C- < button twice to stop completely and
clear the memory.
USING FAST FORWARD OR REWIND •
To move forward through a disc more quickly, A-
press the 8 button.
To rewind through the disc, press the
7 button.
Press the
B- 8 or 7 button repeatedly to cycle
through the available speeds, which appear in the
top left corner of the screen: 2X, 4X, 8X, 16X, 32X
and normal playback speed.
Press
C- PLAY/PAUSE to resume normal playback.
SKIP TO THE NEXT OR PREVIOUS SCENE •
During playback press the : button to skip to the
next scene on the disc, or press 9 to skip to the
previous one.
PASSWORD •
Parental control can be activated by setting the
Password Mode to On. The default password is 1234.
Using the features
Digital LCD Television Instruction Manual EN-28
USING THE ZOOM FUNCTION ❖
Press theA ZOOM button to zoom into the image
on screen. You can press it repeatedly to further
enlarge the picture.
In zoom mode use the
B , 5, and 3 buttons to
display a dierent section of the enlarged picture
on the screen.
SWITCHING ON SUBTITLES ❖
Press the A SUBTITLE button during playback.
The available languages will appear in the top left
B
corner of the screen.
Press repeatedly until your desired subtitle
language is shown.
Press
C SUBTITLE repeatedly until SUBTITLE OFF is
shown to switch the subtitles o.
USING REPEAT MODE ❖
Press REPEAT once to repeat the chapter on a DVD,
twice to repeat the currently playing title or three
times to repeat the whole contents of the disc.
CHANGING THE CAMERA ANGLE ❖
Some DVD have multiple camera angles for some
or all scenes. Press the ANGLE button to change the
camera angle. Dierent camera angles may include:
front, side, whole view or exterior.
ADDITIONAL DVD
FUNCTIONS
D.MENU ❖
Press this button to return to the previous menu item.
AUDIO ❖
Many DVD have multiple soundtracks. To change
between them press the AUDIO button. Wait three
seconds before pressing the button again, to cycle
through the options.
TITLE ❖
Press this button to return to the title menu on some
DVD. Use the , 5, and 3 buttons to navigate
around the menu.
SEARCH ❖
Press SEARCH and use the numerical keys to enter
the chapter number you wish to go to and press
PLAY/PAUSE.
PROGRAM ❖
During playback press PROGRAM to move directly
to a section or programme on the DVD. Press the
digit buttons to select the programme number that
you want. When finished, move the cursor to select
START. The DVD will jump directly to that section
and begin to play. If you want to cancel this function,
press PROGRAM and move to STOP, then press PLAY/
PAUSE.
A-B ❖
Use A-B to set a section of a DVD to repeat. Press A-B
to mark the start point and again to mark the end. The
section will begin to be repeated immediately. Press
A-B to cancel the repetition.
ANGLE ❖
When enjoying sports, concert or theatre, press
this key to watch same actions in dierent angles.
(Valid for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
dierent angles, for example, front, side, whole view
and exterior scene.)
D.CALL ❖
When pressing the D.CALL button repeatedly
dierent OSD indicator will be displayed for dierent
types of disc DVD, CD etc.
PLAYING A JPEG CD ❖
Insert a JPEG CD in the same way as you would a A
DVD or Audio CD, with the label facing away from
you.
The CD will load and a menu of the disc’s contents
B
will appear on screen.
Use the
C 5 and buttons to highlight the
folder and picture you wish to view and press
PLAY/PAUSE. Each image on the disc will show
consecutively, like a slide show.
Press
D PLAY/PAUSE during the slide show to
pause on one image.
Press the
E or button to skip to the next
image or return to the previous one.
Using the features
EN-29 Digital LCD Television Instruction Manual
PLAYING AN AUDIO CD ❖
Insert a CD in the same way as you would a DVD, A
with the label facing away from you.
The CD will load and a menu of the disc’s contents
B
will appear on screen.
Use the
C and 5 buttons to highlight the track
you wish to play and press PLAY/PAUSE, or just
press PLAY/PAUSE to listen to the whole CD from
the beginning.
You can stop, pause, fast forward or fast rewind a
CD in the same way as a DVD. You can also use the
REPEAT button to repeat a track, folder album or
the contents of the whole disc. Press repeatedly
to select what you would like to repeat. You can
also use the A-B function to repeat a certain
section of a track or CD.
Reference Sections
TROUBLESHOOTING
To assist in location of possible faults use the help
guide below:
No picture, no
sound
Verify if the television is
properly plugged in.
Verify if the television has a
proper supplied power source.
Verify if electricity is available.
Blank screen
Verify if correct signals are
input.
Operate the remote to change
signal input to correct input.
Restart the television if power
supply is interrupted.
No sound
Press MUTE button and verify if
Mute mode is set.
Switch to other channel and
verify if the same problem
happens.
Press VOL+ button to see if the
problem can be solved.
Poor sound
Verify if sound system is correct.
Refer to user‘s manual for
adjustment.
No picture in
some channel
Verify if correct channel is
selected.
Adjust the antenna.
No color for
some channel
program
(black and
white)
Verify if the same problem exists
in other channels.
Check out of picture and sound
systems.
Refer to relative instructions
in the Manual for color
adjustment.
Spots with
some or all
pictures
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Make fine adjustment of
channel.
Television out
of control
Disconnect the television from
power supply and 10 seconds
later, connect the television
to the power supply. If the
problem still exists, contact
authorized after-sales service
for technical assistance.
Note
If the fault can not be repaired using the above ❏
guide consult with your local authorized service
centre.
The TV set must only be repaired by a qualified ❏
registered service person. Never attempt to
remove the back cover as the TV set has dangerous
voltages in side that may cause a fatally or fire.
Specification
SCREEN SECTION
Type A-si TFT active matrix
Viewable angle
160(H) 150(V)
(26" digital LCD TV)
176 (H) 176 (V)
(32"/42" digital LCD
TV)
Reference Sections
Digital LCD Television Instruction Manual EN-30
Colour system
PAL, SECAM, NTSC
(AV)
TV/VIDEO SECTION
Sound system BG, DK, I, L
Video input
SCART, S-VIDEO, YP
b/
Pr, YCb/Cr, AV, VGA,
HDMI, USB
GENERAL SECTION
Y/Pb/Pr
Component: 480i/p, 576i,
720p, 1080i, 1080p
Power See rating plate
Power
consumption
See rating plate
Dimensions (W
× D × H) cm
Environment
conditions
Working temperature:
+5 °C - +35 °C
Working humidity:
20% - 80%
Storage temperature:
-15 °C - +45 °C
Storage humidity:
5% - 90%
Accessory
User manual
Remote control
Base cover (Only for 42"
digital LCD TV )
Battery (×2)
* The part specifications of this TV set provided here are
for reference only.
Di
fferences may occur as product technology is
upd
ated.
Design and specifications are subject to change
without noti
ce.
79.0× 21.7× 55.0
(including base) ( LCD TV 3211)
101.8.0 × 25.8 × 67.6
(including base) ( LCD TV 4211)
Loading...