Terex Genie Z-135/70, Genie ZX-135/70 Installation Instructions Manual

Safety Notice

140019

North America

THIS SAFETY NOTICE CONTAINS INFORMATION ABOUT MANDATORY CHANGES OR CHECKS

RELATED TO THE SAFE USE OF OUR PRODUCT.

Issue:

Date:

Models and Serial Numbers
Affected:

January 22, 2015

Z-135/70: Z13505-101 to Z13513-1863
Zx-135/70: Z13513-2002, Z13513-2008
ZX13513-2001 to ZX13515-2563

Subject:

Allowable Hours:

Platform Leveling

60 minutes

Issue:

Genie Industries has become aware of instances where the platform leveling valve, utilized in the above
referenced machines, malfunctions due to contamination of the hydraulic oil. A platform leveling valve that

malfunctions can cause the platform to become unlevel.

Actions Required:

1 Locate all machines within the models and serial ranges referenced above.
2 Order the Platform Leveling Valve Kit PN 1261518.
3 Using the installation instructions included in the kit, install the Leveling Valve Kit on your machine.

Installation of the kit must take place as soon as possible but no later than 30 days from receipt of
the kit.

4 Fill out and sign the completion form attached to the installation instructions and return to Genie. This will

serve as verification that you have completed this Safety Notice.

Continued Use Instructions:

All machine operators and users must be notified of these continued use requirements.

The machine may remain in service until this Safety Notice is completed by following the requirements below:

If platform becomes unlevel, do the following:

a Immediately disengage the foot switch.

Note: Do not re-engage the foot switch. Re-engaging the foot switch can cause the platform to move
further out of level.

b Shut off the engine.
c Remove the operator from the platform.
d Lower the platform using the ground controls.
e Tag and remove the machine from service until this Safety Notice has been completed.

Terex Aerial Work Platforms, 18340 NE 76th Street Redmond WA 98052, Ph: 800-536-1800, 425-881-1800

1 of 2

Safety Notice

140019

North America

To order parts:

Machine owners with a valid Genie account can contact the Terex AWP Parts Department to place an order
through one of the following:

Genie Website

http://www.gogenielift.com

Fax: [phone]
Phone: [phone]

Machine owners without a valid Genie account can contact their nearest Terex AWP dealership or Terex AWP
Service Centers for assistance.

Search for your nearest Terex AWP dealership by visiting our website at:

http://www.genielift.com/dealersearch/

Warranty:

The labor and travel miles required to perform this Safety Notice are covered under the provisions of our LIMITED
PRODUCT WARRANTY statement. Warranty claims can be submitted online, by paper claims, fax or email. If
you need more information about filing a warranty claim, please contact Terex AWP Warranty Department at:

Email: [e-mail]
United States: 1-800-536-1800
Canada: 1-425-881-1800
All other locations: 001-425-881-1800

Genie and local industry standards (e.g. ANSI, CSA) requires that the seller of a Genie machine report to Genie
the model and serial number of each machine sold, as well as the name, address, and telephone number of the
new owner, within 60 days of the sale. Genie, OSHA and local industry standards, also require that the
manufacturer’s Safety Notice be completed. It is your responsibility to communicate this important information to
all machine owners and applicable branches. If you require additional copies of this Safety Notice or have any
questions, please contact Genie Product Support at:

United States: 1-800-536-1800
Canada: 1-425-881-1800
All other locations: 001-425-881-1800

Enclosures:

 Machine List
 New Owner Update Form

NORTH AMERICA Terex Aerial Work Platforms, 18340 NE 76th Street Redmond WA 98052, P h: 800-536-1800, 425-881- 1800

140019

Safety Notice

Terex Aerial Work Platforms, 18340 NE 76th Street Redmond WA 98052, Ph: 800-536-1800, 425-881-1800

2 of 2

Safety Notice 140019

New Owner Update Form

(for updating machine owner information only)

Genie and ANSI requires that the seller of a Genie machine report to Genie the model and serial number of each
machine sold, as well as the name, address, and telephone number of the new owner, within 60 days of the sale.

 If you have sold a machine, list new owner's name, address and phone number, for each machine.

List complete model and serial number (ex. Z13506-317 or ZX13514-2249).

New Owner Information:

Model*
Serial Number *
Owner Name*
Address 1*
Address 2
City/State/Zip*
Phone Number*
Contact Person
* Required fields

Seller Information:
Date:
Company Name:
Account #:
Address:
(street):
(city):
(state, zip code) :
Phone #:

Machine 1 Machine 2 Machine 3

Model & Serial Number Scrapped

 List any machines that could not be inspected or repaired because of the following:

Exported

Stolen

- - - -

- - - -

- - - -

- - - -

- - - -

Fax to:

United States: 1 877-738-7530
Canada: 1 425-498-7530 Central America: + 1 425 498 7530
Mexico: 1 425-498-7530 Asia-Pacific: + 1 425 498 7530
Carribean: + 1 425 498 7530

Latin America: + 55 11 3246-9760

All other locations: + 1 425 498 7530

Other (explain)

Z

-

ZX

-

Installation Instructions

Platform Level Update

135/70

135/70

Part No. 1261248
Rev A