Tenma SS-952C-F Series, SS-952B-F Series Instruction Manual

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com

TM

TM

Page <1>

V1.0

12/04/13

Rework Station

Instruction Manual

SS-952C-F Series

SMD Rework Station

Instruction Manual

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com

TM

TM

Page <2>

V1.012/04/13

Rework Station

Instruction Manual

Product Description:

The TENMA SS-952 Series SMD Rework Station is a reworking tool designed to remove and/or repair surface mounted
devices such as SOIC, CHIP, QFP, BLCC, BGA, and so on. It is made to repair systems without potentially harming or
damaging components by actual or direct contact.

One of the key features of this product is the builtin sleep mode with timer functionality. This allows the device to cool down

temporarily after a predened time set by the user with 5 minutes as the default. The sleep mode function will be activated if the

hot air gun is docked on the handle and remained idle for 5 minutes. Once the hot air gun is released from the handle during

sleep, the unit will automatically switch back to previous working temperature and airow level conditions without the need for

manual intervention.

Functions and Features:

• Micro processorcontrolled ESD safe unit

• Fast heating response

• Easytoadjust temperature and airow control with digital display

• Builtin temperature sensor that aids in providing stable (temperature) measurements

• Builtin thermal protector

• Wide range of operating temperature and airow level selection

• Integrated airow gauge for precise airow level adjustment

• Unique sleep mode with timer functionality

• Automatic cooling functionality for safety and added protection

• Compatibility with various types of air nozzles to meet different repairing requirements

• The package includes both UK and Euro cords

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com

TM

TM

Page <3>

V1.0

12/04/13

Rework Station

Instruction Manual

Package Inclusion:

Quantity Part Description

1 unit TENMA SS-952 Main Station with Hot Air Gun

4 pcs Air Nozzles (1124, 1130, 1196, 1197)

1 pc Z003 Hot Air Gun Holder

1 pc Vacuum Suction Pen (For SS-952) only

1 pc G001 IC Popper (for SS-952 only)

1 pc Power Cord

1 pc Instruction Manual

Specications:

Station Dimensions 188 (W) × 127 (L) × 244 (D) mm

Weight 3.8Kg.

Power Input 110-220V AC/ 50-60Hz

Power Consumption 500W

Temperature Range 100°C-480°C

Heating Element Type Metal Heating Core

Pump/Motor Type Diaphragm Special Purpose Lathe Pump

Air Capacity 23 l/min (Max.)

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com

TM

TM

Page <4>

V1.012/04/13

Rework Station

Instruction Manual

Care and Safety Precautions:

Caution

Improper usage can cause injury and physical damage. For your own
safety, please observe the following precautions.

• Temperature may reach as high as 480°C when turned on.

Do not use the device near ammable gases, paper and other ammable materials.

Do not touch heated parts, which can cause severe burns.
Do not touch metallic parts near the tip.

• Thermal Protector
Unit is equipped with auto shutoff ability when temperature gets too high and automatically turns on when

temperature dropped to a safe level.

• Handle with Care
Never drop or sharply jolt the unit.
Contains delicate parts that may break if unit is dropped.

• Disconnect the plug from the power source if the unit will not be used for a long period.
Turn off power during breaks, if possible.

• Use only genuine replacement parts.
Turn off power and let unit cool before replacing parts.

• The unit may produce a small amount of smoke and unusual odor during rst usage. This is normal and should
not yield any negative result when reworking.

• Soldering process produces smoke, use on well ventilated place.

• Do not alter unit, specically the internal circuitry, in any manner.

www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com

TM

TM

Page <5>

V1.0

12/04/13

Rework Station

Instruction Manual

Legend:

A Product Name
B1 Temperature Meter

B2 Airow Level Meter

C1 Temperature Control (Up)
C2 Temperature Control (Down)

C3 Airow Control (Up)
C4 Airow Control (Down)

D Reset Button
E Hot Air Output
F Hot Air Gun Switch

G Airow Gauge

H Power Switch
I Temperature Adjustment Indicator

Panel Controls: