TEMEX QEUM5, QEUM5-GW User Manual

查询QEUM5110JN1016供应商

FREQUENCY

QEUM5 / QEUM5-GW

UM5 Crystal – Through Hole & Gull Wing SMD packaged

Specification (Rev-C)

Electrical Characteristics ......................................................P01

ESR vs. frequency range and Mode of vibration ..................P01

Mechanical Characteristics ...................................................P01

Ordering Information .............................................................P02

QEUM5-GW Tape Drawing ..................................................P02

Frequency

QEUM5 / QEUM5-GW

UM5 Crystal – Through Hole & Gull Wing SMD packaged

Specification (rev-C) October 03

Electrical Characteristics

Electrical Parameters Unit Minimum Typical Maximum Test conditions

Frequency range

Frequency Tolerance (at 25°C) ± ppm 10 30 50 Refer to Ordering Information

Temperature Stability

Operating Temperature Range

Storage temperature range

Shunt capacitance C0

Load capacitance

Drive level

Aging (First Year)

Insulator resistance

ESR vs. frequency range and Mode of vibration

Frequency range (MHz) Mode of vibration Max ESR (Ω) Frequency range (MHz) Mode of vibration Max ESR (Ω)

10.000 to 19.999 Fund. 60 80.000 to 105.000 3rd 80

20.000 to 40.000 Fund. 40 60.000 to 129.999 5th 200

30.000 to 79.999 3rd 100 130.000 to 200.000 7th 180

Mechanical Characteristics

Ø 0.35 ±

0.05mm

QEUM5

H L

6 max

[0.236]

MHz 10 200

± ppm 10 30 50 Refer to Ordering Information

°C -20/+70 -40/+85 Refer to Ordering Information

°C -40 +85

pF 7.0

pF 10pF ~ 32pF or series Refer to Ordering Information

µW 100 500

± ppm 3 Ref at 25°C

MΩ 500 At 100VDC

3.2 max
[0.125]

Customized specification upon request

QEUM5-GW

rd

, 2006

1

TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.