All rights reserved. No part of this manual may be reproduced, transmitted, copied, or stored in any storage medium, for any
purpose, without prior written consent from TeleNav, Inc. TeleNav, Inc. hereby grants the right to download one copy of this
manual onto a hard drive for personal use. This manual is copyrighted and contains proprietary information that is subject to
change without notice. For more information visit www.telenav.com
TeleNav utilizes GPS position determination technology and access to your carrier’s data network. The Pocket PC
provides both the Windows Mobile OS environment and access to your carrier network.
The TeleNav application provides:
•GPS navigation that punctually guides you turn-by-turn to any destination address in the Continental
US. If you miss a turn or get off-track, TeleNav will calculate a new route for you. You can enter one or
more destination addresses by calling an automatic voice recognition system, entering them on the
TeleNav website, or by keying them directly into the handheld. Optionally, you can input a remote
origin and receive Driving Directions from that origin address to the selected destination address.
•A Business Finder feature that allows you to find businesses or points of interest near your current
location, around a waypoint, around an entered address, or around an airport. You can call the
business first to check availability of an item, or get a reservation, and then navigate to it; or you can
save the address for use later in the day.
•Maps of the area around your current location; a marked waypoint; or an address you enter manually,
or have previously entered. You can pan (adjust left/right or up/down) the map, and zoom in or out.
You can also mark a point under the cursor as a waypoint.
•The ability to personalize the application by selecting the use of US customary or metric distance units,
language for audible guidance, volume and backlight level, timing of displayed graphics, etc.
•A viewer that displays your current location relative to a selected waypoint, recent stop, or saved
Favorite address; and to navigate relative to that selected point.
• The ability to mark the current location as a waypoint that can be labeled.
• A compass-like indicator presenting your direction of travel, location, and speed.
TeleNav’s servers support these enhanced services via your carrier’s data network.
2. Safety and Legal Notices
Please read this section carefully before using TeleNav
TeleNav will not accept any responsibility whatsoever for accidents resulting from failure to observe common sense
precautions. Your personal judgment, traffic regulations, and common sense must always take precedence over
any driving direction produced by TeleNav.
WARNING: Keep your eyes on the road.
It is your responsibility as the vehicle operator to keep your eyes on the road and be an alert driver at all times,
ESPECIALLY when the vehicle is moving. The vehicle operator should not be distracted by the application
displays, audible cues, or manually interacting with the controls. When you need to enter data on your handheld
using the keypad or study the display, please do so while the vehicle is parked, not while in motion. Should your
ability to drive responsibly be decreased, please turn off the device.
If you are using a handheld mounting kit, make sure that it does not obscure your vision. You may wish to charge
the handheld while using TeleNav. If so, make sure the charging cable does not interfere with any of the vehicle
controls.
WARNING: Drive safely and use common sense.
The vehicle operator’s personal judgment, traffic regulations, and common sense must always take precedence
over the instructions provided by TeleNav.
It is your responsibility as the vehicle operator to drive safely, observe all traffic rules and above all use your own
personal judgment while driving. If you feel that a route suggested by the navigation software instructs you to
perform an unsafe or illegal maneuver, places you in an unsafe situation, or routes you into an area which you
consider unsafe, do not follow the instructions.
3.Getting Started with TeleNav
The TeleNav application that resides within your Pocket PC requires a TeleNav subscription and means of
accessing the public Internet.
TeleNav Account
You can establish a TeleNav account by visiting www.telenav.com.
Data Service Options
The TeleNav application on your Pocket PC communicates with the TeleNav servers to get routing, maps, and
points of interest via the carrier data network. If you have a data or email services plan for the Pocket PC, you do
not need to purchase anything else. If you do not have either of these plans, you should order one from your
carrier.
TeleNav can be installed on your Pocket PC two different ways: 1) by using the Pocket PC browser and
downloading the application directly to your handset over the air (OTA), or 2) by loading the application from a
distribution CD using the Microsoft ActiveSync application.
Installation Instructions
Using the OTA download method to install
1. Locate the Web icon on the handset menu and launch the browser.
2. Input the OTA download link: http://ota.telenav.com/ota/tn and click GO.
3. The download process will begin immediately and a warning message will be displayed, press YES to begin
the download.
NOTE: We recommend that you install the TeleNav application on the device when the option is given during the
file installation.
After the download process has completed successfully, locate the TeleNav directory in the file explorer Program
Files directory.
Using the CD to install onto SD Card
1. Insert the TeleNav application CD into your CD or DVD drive.
2. Insert the flash memory card into the card reader.
3. Browse the TeleNav application CD and open the Pocket PC folder, find the zipped CAB file with the name of
your device (8125 or 8525) and drag it to the flash media drive.
4. After moving the TeleNav application CAB file to the media card, remove the flash memory card from the
reader and insert it into the Pocket PC.
5. Verify that the TeleNav CAB file is now located on the storage device by opening the Start Menu, select File
Explorer then select Storage Card.
6. Select the TeleNav CAB file and complete the installation.
NOTE: We recommend that you install the TeleNav application on the device when the option is given during the
file installation.
To launch TeleNav on your Pocket PC find the TeleNav icon on the Pocket PC
Start Menu and select it.
NOTE: If you have not added TeleNav to the Start Menu go to Programs and
select it. Follow the directions above to add TeleNav to the Pocket PC Start
Menu.
After starting TeleNav, the banner screen will appear for a few seconds.
Welcome Screen
This next screen describes the services TeleNav provides.
Terms of Use
Next you must agree to the TeleNav software license and Terms Of Use to use
TeleNav in order to continue with the setup process.
The next screen will notify you that you will need your 10-digit phone number ,
also referred to as an account number, and your 4-digit PIN.
NOTE: Your account number MUST be the same as your carrier phone
number beginning with area code so that when you call the Voice Address Input
System you will not need to type in the account number.
Input your TeleNav account number and the PIN your provided when registering
for TeleNav service at www.telenav.com. You must pull out the Pocket PC’s
keyboard in order to enter the phone number.
After you have entered the account number at 4-digit PIN, press the Submit
button.
A warning message will be displayed, press OK to complete the setup process.
NOTE:
and will be directed to go to www.telenav.com to extend your service
agreement. You will not be able to progress beyond this point until your account
is returned to current status. You may also see an important message from
TeleNav regarding upgrades, scheduled downtime, pending account expiration,
etc.