TELEFUNKEN TK-2929ST Service Manual

TELEFUNKEN

SERVICE MANUAL

TK2929ST

1. Caution……………………………………………………………2

2. Specification………………………………………………………6

3. BOM List ……………………… ………………………………9

4. Alignment Procedure………………………………………….…45

5. Block Diagram……………………………………………………48

6. Schematic Diagram………………………………………………49

7. PCB Layout………….……………………………………………50

8. Explode View Diagram……………………………………………51

This manual is the latest at the time of printing, and does not

include the modification which ma

the constant improvement of product.

be made after the printing, b

CAUTION:

Use of controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION: T O REDUCE THE RISK OF

CAUTION

RISK RISK OF OF ELECTRIELECTRICC

SHOCK SHOCK DO DO NOT NOT OPEN.OPEN.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of uninsulated voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the person.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

dangerous

WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

Read all of these instructions. Save these instructions for later use . Follow all Warnings and Instructions marked on the audio equipment.

1. Read Instructions- All the safety and operating instructions should be read before the product is operated.

2. Retain Instructions- The safety and operating instructions should be retained for future reference.

3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

FOR YOUR PERSONAL SAFETY

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage points or shor t out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.

6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to qualified service personnel.

8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.

9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and should use a mounting kit approved by the manufacturer.

10.2. An appliance and car t combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

PROTECTION AND LOCATION OF YOUR SET

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, etc. Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall outlet and refer servicing to qualified service personnel.

12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.

13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.

14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to protect it from overheating. These openings must not be blocked or covered.

Never cover the slots or openings with cloth or other material. Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc. Never place the set near or over a radiator or heat register. Never place the set in enclosure, unless proper ventilation is provided.

a built-in

PROTECTION AND LOCATION OF YOUR SET

15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No. 70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrode, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONALELECTRICAL CODE

ANTENNA LEAD- INWIRE

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONALELECTRICAL CODE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NECSECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PARTH)

15.2. Note to CATV system installer : (Only for the television set with CATV reception)

This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that pro vides

installer s guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning and power-line surges.

OPERATION OF YOUR SET

18.

This television set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions.

19. If the television set does not operate normally by following the operating instructions, unplug this television set from the wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the television set to normal operation.

20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on a holiday, turn the television set and unplug the television set from the wall outlet.

off

IF THE SET DOES NOT OPERATE PROPERLY

21. If you are unable to restore normal operation by following the detailed procedure in your operating instructions, do not attempt any further adjustment. Unplug the set and call your dealer or service technician.

22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for service, unplug the set and have it checked by a professional service technician.

23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your dealer or service technician.

FOR SERVICE AND MODIFICATION

24. Do not use attachments not recommended by the television set manufacturer as they may cause hazards.

25. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

26. Upon completion of any service or repairs to the television set, ask the ser vice technician to perform routine safety checks to determine that the television is in safe operating condition.

PFS2 FORMAT-1 Report

play

ype

(

g (

)

guag

(

)

Date: 2003-11-26 16:30

ProductView......:

ort by............:

Specs / Products SRF NO./ODF NO.

MasterData Customer Id Version Status Brand EAN UPC Rece

tion +Tunin +Tunin +Tunin +Fre +Channels

+IF Fre +TV S +Add S +TV S +Sound S Picture - Processin +Scan +Scan Modes +Wide Screen Switchin +Combfilter +Picture Control

+Pict Enhancement +Pict Noise Reduction Picture - Dis +Display T +Screen Format +Size +Deflection S +Tube Technology (CRT onl +CRT Defl +CRT Gun +CRT Ma +Resolution +Coatin +White Point Sound +Leaflet Power +RMS Power Intern +RMS Power Extern +Surround Sound +Sound Features

- presets/channels

- technolo

- Indication

Bands

stems Off Ai

stems Ext In

stems Multi

stems

Visual)" - size/vis. cm

stem (CRT onl

n field

only for D.V. sets

Product:

TK2929ST

ON43044005R1

BGH S.A.

0.1 WG Archived TELEFUNKEN \ \

181 PLL

--Full-Cable VHF:2-13, UHF:14-69, CATV: 1-13, A-W.W+1---W+84,A-5---A-1,5A PICTURE 45.75MHz PAL M/N 'NTSC M (3.58 - 4.433)

--PAL NTSC

AV STEREO, AMERICAN STEREO

Standard 4:3

X 4 Picture Modes, Brightness, Color, Contrast, Tint, Sharpness Cont Var Black Stretch

---

DV - CRT - FSQ 4:3 29"

Black Matrix, Iron

Stand Gun Normal

BTSC

+Sound Control Sound - S +S +S +S User Interface +Interface Name +Voice Control +Menu +Menu Colours +Menu Lan +S +O

+PP Features +Tuning/Install Features

+Clock/Timer Functions +Local Controls Front +Local Controls To +Indicators - screen +Indicators - front +Numb of Loc Cont

2003-11-27 13:17 29276 PFS 1 of 3

eakers eaker configuration eakers used eaker Size

ecial Features

erational Features

incl Mains

Volume

2 speakers Normal Range

29276

Cursor Control

Spanish, English, Portuguese, French

COMB-F

Auto Store, Factory Mode, Language Selection, Service Mode Sleep timer/Clock

Date: 2003-11-26 16:30

)

ypenr

(

)

(

)

(

)

(

)

(

)

(

)

quip

ProductView......:

ort by............:

Specs / Products

+Number of Ind. (incl Mains +Local Controls (Old)

Remote Control +Remote Control - sco +Remote Control - t +Remote Control - t +Remote Control - features Connectors Rea +Scart RGB+Y/C+CVBS +Scart RGB+CVBS +Scart CVBS+Y/C +Com +In Y/C+Cinch +In Y/C+Cinch(CVBS+Mo +In Y/C+Cinch(St +In BNC (CVBS +In Cinch(CVBS+St +In Cinch +Out Cinch +Out Cinch +Out Cinch Audio Stereo +Out Cinch Audio Mono +Out Cinch Dolb +Di +Louds +Control Busses +Feature Slot +ITV Smart Port +Terr. Antenna in Guide + IR Blaster Jack Connectors Fron +In Cinch (CVBS + St +In Cinch (CVBS+Mo +Headphone Out

onent In (Y/U/V) Cinch

CVBS+St

CVBS+Mo

CVBS+St CVBS+Mo

Audio Out

eakers

Surround

Product:

TK2929ST

Channel +-, Tact Switch, Vol +-, TV/AV, MENU

TV Standard E

--X

75 Ohms (F type)

Connectors Side +In Y/C + Cinch +In Y/C + Cinch Stereo +In Cinch +IN Cinch (CVBS + Mo +St +Headphone Out Connectors To Connectors Mechanical

lin

St +Cabinet Name +Confi +Gra +Cabinet Colour and Finish +Mechanics +S General +Se +Chassis +Software Deliver +Software Version +Mains Volta +Mains Fre +T Power Consum Power Consum Power Consum +Power in "ON" for +Power in Standb +Power in "OFF" for Wei Weight (P)TV (excl. Package Weight AVUnit excl Packagin +INDICATION on BACKCOVE +Channel Final E

uration

hics/Logo's

eaker Visibilit

ment

e Mains Cord

ht (P)TV (incl. Packagin

CVBS+St + Mo

CVBS + St

Mode

uenc

tion (P)TV in On tion SB in Watts tion Semi SB in W

for

ment

29276 Symm TELEFUNKEN

Standard

Standard 4:3 M34

110-240V 50/60Hz Argentina

Less than 6W

2003-11-27 13:17 29276 PFS 2 of 3

Date: 2003-11-26 16:30

guag

quip

ging

ype

(

ype

)

ProductView......:

ort by............:

Specs / Products

+Packaging - methods +Documents and manuals +Lan +Cables Su +Antenna Su +Stand Su +Aux E Packa Packa Packa Miscellaneous +EAN Indication +A +Tests +Local Inte

arious Perf. Param. +Service Call-Rate PIP/POP +T +Features Di

ital Reception +Transmission Built-in Data S +Text Standard

Tele)text Features

+ +Nbr bck +Text Technolo +Digital Data handlin +Program Guide Built-in Clock/Timer +T +Features Built-in Radio +T Built-in PC displa +PC Synch +PC Control Built-in DVD drive +T +T Phased Out Items +Tuner/Frontend +Sensitivit +CRT EHT +Li +Accoun +XX(Radio Antenna in +Non Volatile Memor +In Y/C + Cinch(CVBS+Mo Version of deck

es DFU

lied

m Supplied

- width cm

- height cm

- depth cm

robation

ration

stem

rnd page / Mem Size

e of Medium e of Dec

htning Protection

Product:

TK2929ST

Batteries for RC (2 x AA)

No PIP/POP n/a

2003-11-27 13:17 29276 PFS 3 of 3

Item No. Description Quantity Req. Designator Remarks

08-02516M-YUY ASS'Y - YUV PARTS 1 11-SA1015-YBX TRANSISTOR 2SA1015Y 1 Q933 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q932 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q934 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R939 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R940 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R944 18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R937 18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R938 18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R942 18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R943 18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R935 18-CB0820-JNX RES. C.F. 82 OHM 1/6W +/-5% 1 R936 27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C230 27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C231 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR P9-P11 OF IC261 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 FOR P1-P3 OF IC261 41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J903 41-WJ0100-B00 WIRE BARE JUMPER 10MM 1 J904 41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J254 41-WJ0200-B00 WIRE BARE JUMPER 20MM 1 J256 47-RCA089-XX0 RCA SOCKET AV-3.2-3LK-N2 1 P931 18-CB0222-JNX RES. C.F. 2.2k OHM 1/6W +/-5% 1 R941 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C932 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C933 08-029276-FRY 1 74-120120-8CD POLYBAG (120CMX120CM) 1 FOR FRONT CABINET 74-145120-8CD POLYBAG (145CMX120CM) 1 FOR REAR CABINET 74-344740-50C EPE BOARD ((750MMX580MMX5MM) 0.25 FOR FRONT CABINET 76-001497-0AF CARTON BOX LWH 640X460X360MM 0.0416 FOR OTHER 76-002913-0AR CARTON BOX 0.3333 FOR REAR CABINET

Item No. Description Quantity Req. Designator Remarks

76-002935-0AF CARTON BOX 0.25 FOR FRONT CABINET 76-346740-01A CARTON SHEET LWH 440X620X3MM 0.037 FOR OTHER 77-120120-6WC BUBBLE BAG (120cmX120cm) 0.5 FOR FRONT CABINET 08-02988M-CFY ASS'Y - COMB FILTER BD 1 11-SK2541-0BX FET 2SK2541(N-CHANNEL) 1 Q1111 13-0TDA91-81P IC TDA9181 (COMB FILTER) 1 IC1101 18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R1112 18-CB0472-JNX RES. C.F. 4.7k OHM 1/6W +/-5% 1 R1111 26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1123 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1114 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1116 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1117 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1118 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1119 26-EBP150-JCX CAP. CER 15PF 50V +/-5% CH 1 C1120 26-EBP150-JCX CAP. CER 15PF 50V +/-5% CH 1 C1122 26-EBP222-KBX CAP. CER 2200PF 50V +/-10% B 1 C1111 27-MBC104-J0X CAP. M.P.E 0.1 UF 63V +/-5% 1 C1112 34-R100J2-0EX COIL PL - 10 UH +/-5% 1 L1111 34-R100J2-0EX COIL PL - 10 UH +/-5% 1 L1112 40-2980UA-CBB P.C.B. COMB F. 1 41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1112 41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1116 41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 R1114 41-WJ0070-B00 WIRE BARE JUMPER 7MM 1 J1113 41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J1111 46-21550W-12X HEADER *12 TS12B-SQ-1 L=10MM 1 P1101 25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1113 25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1115 25-BFB479-M1X CAP. ELEC 4.7 UF 50V +/-20% 1 C1121 08-02988M-MSY ASS'Y - MSP PARTS 1

Item No. Description Quantity Req. Designator Remarks

11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1001 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1002 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1003 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q1004 18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R1001 18-CB0101-JNX RES. C.F. 100 OHM 1/6W +/-5% 1 R1002 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1021 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1004 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1022 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1023 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1024 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R1025 18-CB0103-JNX RES. C.F. 10K OHM 1/6W +/-5% 1 R1003 18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R1007 18-CB0332-JNX RES. C.F. 3.3k OHM 1/6W +/-5% 1 R1005 18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R1006 26-ABC152-KBX CAP. CER 1500 PF 50V +/-10% B 1 C1012 26-ABC339-CZX CAP. CER 3.3 PF 50V +/-0.25 SL 1 C1001 26-ABC339-CZX CAP. CER 3.3 PF 50V +/-0.25 SL 1 C1002 26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1021 26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1022 26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1023 26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C1024 26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C1025 26-EBP560-JZX CAP. CER 56PF 50V +/-5% SL TUBE 1 C1003 26-EBP560-JZX CAP. CER 56PF 50V +/-5% SL TUBE 1 C1004 26-EBP560-JZX CAP. CER 56PF 50V +/-5% SL TUBE 1 C1005 34-R220J2-0EX COIL PL - 22 UH +/-5% 1 L1001 41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1002 41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1003 41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 J1005

Item No. Description Quantity Req. Designator Remarks

41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1006 41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1007 41-WJ0065-B00 WIRE BARE JUMPER 6.5MM 1 J1009 41-WJ0080-B00 WIRE BARE JUMPER 8 MM 1 J1004 41-WJ0090-B00 WIRE BARE JUMPER 9MM 1 J1001 45-OSC18M-4Y0 CRYSTAL 18.432M 1 X1001 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1013 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1014 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1015 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1016 25-BCB100-M1X CAP. ELEC 10 UF 16V +/-20% 1 C1008 25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1019 25-BFB339-M1X CAP. ELEC 3.3 UF 50V +/-20% 1 C1010 13-P3440G-B8P IC MSP3440G B8(52-PIN PSDIP) 1 IC1001 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J1021 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 J1022 26-EBP390-JCX CAP. CER 39PF 50V +/-5% CH 1 C1034 26-EBP390-JCX CAP. CER 39PF 50V +/-5% CH 1 C1035 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1006 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1009 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1011 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C1018 26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1017 26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1030 26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1031 26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1032 26-EBP104-ZFX CAP. CER 0.1UF 50V +80%/-20% 1 C1033 08-0B276M-CRY 1 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D501 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D502 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 L501

Item No. Description Quantity Req. Designator Remarks

11-A562TM-0BX TRANSISTOR 2SA562TM-0 1 Q507 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q502 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q504 11-SC1815-YBX TRANSISTOR 2SC1815Y 1 Q506 11-SC4544-0AX TRANSISTOR 2SC4544 1 Q501 11-SC4544-0AX TRANSISTOR 2SC4544 1 Q503 11-SC4544-0AX TRANSISTOR 2SC4544 1 Q505 18-CB0102-JNX RES. C.F. 1K OHM 1/6W +/-5% 1 R515 18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R514 18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R501 18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R505 18-CB0561-JNX RES. C.F. 560 OHM 1/6W +/-5% 1 R510 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R502 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R506 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R509 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R511 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R522 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R503 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R508 18-CB0681-JNX RES. C.F. 680 OHM 1/6W +/-5% 1 R513 18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R519 18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R520 18-FE0272-JNX RES. M.O. 2.7K OHM 1/2W +/-5% 1 R521 18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R516 18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R517 18-FG0183-JHX RES. M.O. 18K OHM 2W +/-5% 1 R518 25-BCB471-M1X CAP. ELEC 470 UF 16V +/-20% 1 C506 25-BLA100-M1X CAP. ELEC 10 UF 250V +/-20% 1 C504 26-AMK102-KRX CAP. CER 1000 pF 2KV +/-10% R 1 C505 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C508 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C509

Item No. Description Quantity Req. Designator Remarks

26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C501 26-EBP391-JCX CAP. CER. 390PF 50V +/-5% CH 1 C502 26-EBP471-JCX CAP. CER 470PF 50V +/-5% CH 1 C503 34-R220K2-1BX COIL CHOKE 22 UH +/-10% 1 L502 40-2980UA-CRA P.C.B. CRT BD 1 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L504 41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R504 41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R507 41-WJ0060-B00 WIRE BARE JUMPER 6mm 1 R512 41-WJ0050-B00 WIRE BARE JUMPER 5MM 1 L503 41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J503 46-10967W-01X PIN BASE *1 TJC1-1A 1 P501 FOR CRT GROUNDING HOUS. 46-30615H-04X HS 4P24 460 F/W TJC3-4Y/SCN-4 1 P502 FOR M. BD P421 46-37030H-05X HS 5P 2468#24 450 TJC3-5Y/SCN 1 P503 FOR M. BD P201 47-CRT004-XX0 CRT SOCKET GZS10-2-AC2 1 S501 08-0B276M-SW1 1 11-IRR001-3X0 IR RECEIVER MODULE HK381A 1 IR1001 14-LED05R-XX1 LED RED FB205 1 D1001 18-CB0470-JNX RES. C.F. 47 OHM 1/6W +/-5% 1 R1002 18-CB0471-JNX RES. C.F. 470 OHM 1/6W +/-5% 1 R1003 25-BCB470-M1X CAP. ELEC 47 UF 16V +/-20% 1 C1001 40-T34276-SWB P.C.B. POWER SWITCH BD 1 41-WJ0075-B00 WIRE BARE JUMPER 7.5MM 1 J1001 46-28559W-02X PIN BASE *2 TJC1-2A 1 S1002 46-28559W-02X PIN BASE *2 TJC1-2A 1 S1001 FOR POWER CORD 46-32269H-02X HS 2P22 200 TJC1-2Y/TJC1-2Y 1 FOR PWR SW. BD(S1002) & PWR PARTS 46-37030H-05X HS 5P 2468#24 450 TJC3-5Y/SCN 1 P1001 FOR M.BD P001 48-POW001-AX0 SWITCH POWER 1 SW1001 51-DC0220-0QB01 POWER CORD 1 62-226920-0HA LED HOLDER ABS-LG H121 (HB) 1 62-265160-0HA POWER SW. ADAPTOR 1

Item No. Description Quantity Req. Designator Remarks

08-0C276M-KEN 1 18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R023A 18-CB0182-JNX RES. C.F. 1.8K OHM 1/6W +/-5% 1 R024A 18-CB0272-JNX RES. C.F. 2.7k OHM 1/6W +/-5% 1 R025A 18-CB0432-JNX RES. C.F. 4.3K OHM 1/6W +/-5% 1 R026A 18-CB0622-JNX RES. C.F. 6.2k OHM 1/6W +/-5% 1 R027A 40-29166T-KEA P.C.B. KEY BD 1 46-39259H-02X HS 2P2468#24 1000 TJC3-2Y/JC25-26 1 P004A FOR M. BD P003A 48-TAC001-XX0 TACT SWITCH 1 S001A 48-TAC001-XX0 TACT SWITCH 1 S002A 48-TAC001-XX0 TACT SWITCH 1 S003A 48-TAC001-XX0 TACT SWITCH 1 S004A 48-TAC001-XX0 TACT SWITCH 1 S005A 48-TAC001-XX0 TACT SWITCH 1 S006A 08-2975SM-PW2 1 10-1N4004-EBX DIODE IN4004 (RECTIFIER) 1 D843 10-1N4148-ABX DIODE 1N4148 (SWITCHING) 1 D842 11-0BF422-0BX TRANSISTOR BF422 (NPN) 1 Q831 11-SC4793-0AX STANSISTOR 2SC4793 1 Q801 13-00SE14-0NS IC SE140N 1 IC831 13-0HPC92-2CP PHOTO COUPLER HPC922-C 1 IC802 13-STRF66-56P IC STR-F6656 1 IC801 18-CB0152-JNX RES. C.F. 1.5k OHM 1/6W +/-5% 1 R833 18-CB0223-JNX RES. C.F. 22k OHM 1/6W +/-5% 1 R840 18-CD0272-JNX RES. C.F. 2.7K OHM 1/4W +/-5% 1 R838 18-CB0392-JNX RES. C.F. 3.9K OHM 1/6W +/-5% 1 R841 18-CD0102-JNX RES. C.F. 1k OHM 1/4W +/-5% 1 R805 18-CD0102-JNX RES. C.F. 1k OHM 1/4W +/-5% 1 R808 18-CD0272-JNX RES. C.F. 2.7K OHM 1/4W +/-5% 1 R813 18-CD0470-JNX RES. C.F. 47 OHM 1/4W +/-5% 1 R809 18-CD0479-JNX RES. C.F. 4.7 OHM 1/4W +/-5% 1 R811

Item No. Description Quantity Req. Designator Remarks

18-CD0560-JNX RES. C.F. 56 OHM 1/4W +/-5% 1 R837 18-CD0829-JNX RES. C.F. 8.2 OHM 1/4W +/-5% 1 R842 18-CE0105-JNX RES. C.F. 1M OHM 1/2W +/-5% 1 R806 18-CE0105-JNX RES. C.F. 1M OHM 1/2W +/-5% 1 R806A 18-CE0563-JNX RES. C.F. 56k OHM 1/2W +/-5% 1 R803 18-CE0563-JNX RES. C.F. 56k OHM 1/2W +/-5% 1 R804 18-FG0223-JHX RES. M.O. 22K OHM 2W +/-5% 1 R836 18-FG0333-JHX RES. M.O. 33K OHM 2W +/-5% 1 R810 18-FG0333-JHX RES. M.O. 33K OHM 2W +/-5% 1 R839 22-NTC479-XX0 NTC 4.7 OHM +/-18% NTC4.7D2-14 1 R802 22-PTC140-XX0 POSISTOR 14 OHM 1 RT801 25-BKA100-M1X CAP. ELEC 10 UF 200V +/-20% 1 C808 25-BKA100-M1X CAP. ELEC 10 UF 200V +/-20% 1 C838 25-BKJ221-M1X CAP. ELEC 220 UF 200V +/-20% 1 C835 25-BMJ391-M1X CAP. ELEC 390 UF 400V +/-20% 1 C806 26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C830 26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C833 26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C836 26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C844 26-AIC221-KBX CAP. CER 220 PF 500V +/-10% B 1 C841 26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C805 26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C834 26-AIM103-KBX CAP. CER 0.01UF 500V +/-10% B 1 C837 26-AKK222-KRX CAP. CER 2200 PF 1KV +/-10% R 1 C814 26-AMK221-JZX CAP. CER 220pF 2KV +/-5% SL 1 C807 26-AQK472-ZFX CAP. CER 4700PF 250VAC+80-20%F 1 C803 26-AQK472-ZFX CAP. CER 4700PF 250VAC+80-20%F 1 C804 26-EBP102-KBX CAP. CER 1000 PF 50V +/-10% B 1 C811 26-EBP103-ZFX CAP. CER 0.01UF 50V +80/-20% F 1 C815 26-EBP221-JCX CAP. CER 220PF 50V +/-5% CH 1 C810 27-MHM104-K0X CAP. METAL P.E. 0.1UF 400V 10% 1 C802A

+ 36 hidden pages