Telefunken TF-MSM2.106 User Manual

MUSIC MICRO SYSTEM 2.1 МУЗЫКАЛЬНЫЙ МИКРО ЦЕНТР 2.1
TF-MSM2.106
Instruction manual
Руководство по эксплуатации
Instruction manual
Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future.
Description
Front panel
1 2
3
7
Back panel
MADE IN CHINA
4 5 6
1. MODE button (PREVIOUS) button
2.
VOL- button
3.
4. (PLAY/PAUSE) button
5. (NEXT) button
6. VOL+ button
7. FM antenna
8. Audio output socket
9. Audio input socket
10. BASS knob
11. Power ON/OFF switch
12. AC IN
ANT
AUDIO OUT
L
L R
AUDIO IN
8
R
Not indicated: USB port, SD card slot (top panel)
9
10
11
~100-240V
50/60Hz
12
3
Instruction manual
Remote controller
1
2
3
4 5
6 7 8
9
STANDBY button. Press once to
1. switch the unit on. Press and hold to switch the unit off.
2.3.VOL+ button. Press to increase the volume level. MODE button. Press to select an input mode: BT - USB - SD - FM - AUX
4. VOL- button. Press to decrease the volume level.
5. button. Press to play and pause
the playback. In FM mode press and hold to automatically scan and save available radio stations.
6. button. Press to select a previous track or radio channel.
7. USB/SD button. Press to go to the USB/SD mode.
8. +1 button. Press to jump 1 track forward.
9. +10 button. Press to jump 10 tracks forward.
10. BT button. Press to go to the Bluetooth mode.
11. MUTE button. Press to mute/unmute the sound.
10 11
12
13 14
15 16
12. EQ button. Press to adjust the equalizer (in USB/SD mode).
13. button. Press to select a next track or radio channel.
14. REPEAT ONE button. Press to repeat one track.
15. REPEAT ALL button. Press to repeat all
tracks.
16. +100 button. Press to jump 100 tracks
forward.
Utilization of the product
If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.
Important safeguards
• The instruction manual contains important operating and maintenance instructions. For your safety, it is necessary to refer the manual. Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct sunlight, too high or low temperature or humidity.
• Do not disassemble the unit yourself. Refer servicing to qualified service personnel.
Power supply
• Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
• Insert the plug into power supply.
Caution: Always unplug the appliance from a
power supply, when it is not used for a long time.
4
Instruction manual
Connections
ANT
AUDIO OUT
R
L
L R
AUDIO IN
MADE IN CHINA
~100-240V
50/60Hz
• Connect the satellite speakers audio plug to the corresponding subwoofer audio output socket (Left and Right).
• Connect a 3.5mm stereo or RCA plug to the audio input socket. The other end to sound source.
• Connect the power plug to AC power source, switch on the power and adjust the volume to your satisfaction.
General operations
Power on/off
When the unit is connected to the current supply mains, press the POWER button once to switch the unit on. Press this button again to restart the unit. Press and hold this button to switch the unit off.
Volume control
Press the VOL+ and VOL+ buttons to adjust the volume level of the unit. Press the MUTE button on the RC to mute/unmute the sound.
Audio input
You can connect the audio output of an external device to this unit, to listen to the sound of that device through the speakers of this unit.
• To connect an external audio device, please use a standard audio cable with 3.5­mm-to-3.5 mm plugs to connect the input terminal AUDIO IN (RCA L and R inputs) on the unit. Press MODE button to switch to AUX mode. Turn on the external device. You cannot control playback with the buttons of this unit except adjusting the volume.
Audio output
Use a standard RCA audio cable to connect the L and R audio outputs (satellite speaker outputs) to the corresponding audio inputs of an external media device (CD, DVD, VCR, VCD, etc.).
Modes
Press the MODE button to select an operation mode: BT - USB - SD - FM - AUX.
Radio operation
• Press the MODE button repeatedly
to select the RADIO (FM) mode.
• For FM reception extend the FM antenna.
• For step-by-step tuning of the radio
frequency, short-press the NEXT / PREVIOUS buttons on the remote control. To semi­automatically search for the nearest radio station, press and hold the NEXT / PREVIOUS buttons; The device will search for the nearest station with a strong signal and, after finding it, will begin the broadcast. Repeat this operation to search for other available stations. Press the PLAY / PAUSE button to automatically scan and save available radio stations.
• Shortly press the NEXT button to jump
to the next preset station. Press and hold the button to manually increase (fine-tune) the radio frequency.
Shortly press the PREVIOUS button to
• jump to the previous preset station. Press and hold the button to manually decrease (fine-tune) the radio frequency.
4
5
USB/SD operation
Instruction manual
Connecting USB/SD
• Insert a USB device into the USB port or insert a memory card into the memory card slot. The unit will switch to USB or SD mode automatically. The unit will start reading the device.
• When the device and tracks on it are
detected, the display shows the currently playing track number and track playback time.
Playback operations
• During playback press button to pause playback. Press this button again to resume playback.
• During playback press go to previous or next track.
/ buttons to
General USB notes
• This unit is equipped with a USB socket that can read and play MP3 files stored on standard USB flash (compatible with USB version 2.0) up to 32 GB.
Always switch off the unit or change mode to another one before removing a USB flash drive to prevent damage to your USB device.
Note: Although this product is fully
compatible with USB 2.0 standard, a small percentage of USB flash drives might not be readable, due to those device manufacturers’ non-compliance with the full (official) USB standards.
• FAT/FAT32 file system are supported. According to the USB 1.1/2.0
Standard, usage of a USB device with power current consumption exceeding 500 mA is not recommended without supplementary power supply.
Failure to use supplementary power for connected USB drives with power consumption exceeding this value as well as defective USB drives may cause mechanical or thermal changes of elements of this unit as well as failure of internal elements of the USB port. Such damages are not warranty cases.
Warning: use of external USB drives
containing BIN files in root directory may cause malfunction of unit or damage to the software.
Bluetooth operations
Bluetooth wireless playback
• This unit can wirelessly playback audio from any device with Bluetooth A2DP function.
• The wireless range is approximately within 10 meters.
• Wireless of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO THIS
UNIT:
• Make sure the Bluetooth function is switched on in your device (e.g. smartphone, tablet).
Switch on the unit and press
MODE to select the Bluetooth mode.
• Once the Bluetooth pairing indicator begins flashing, you will find the unit listed in the Bluetooth connections list of your device (as TF-MSM2.106).
• If asked for a passcode, enter “0000”
• The initial setup is required only once per device. To pair another device repeat the above steps.
audio streaming requires pairing
5
6
Loading...
+ 14 hidden pages