Telefunken TF-MS2101 User Manual [ru]

MIDI MUSIC SYSTEM WITH BLUETOOTH
МУЗЫКАЛЬНАЯ MIDI СИСТЕМА С BLUETOOTH

TF-MS2101

Instruction manual

Руководство по
эксплуатации

Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.

Description

Top panel

1. Microphone input

2. Guitar input

3. Microphone volume knob

4. Echo volume knob

5. VOCAL/EQ button

6. BASS button

7. DJ EFFECT button

8. AUTO DJ button

9. TWS/PARTY CHAIN button

10. Display screen

11. SOURCE button

12. NEXT ( ) button

13. PREVIOUS ( ) button

14. PLAY/PAUSE ( ) button

15. POWER ON/OFF button

16. Guitar volume knob

17. USB B (Charging) port

18. LIGHT button

19. USB A (Playback) port

20. Master volume knob

21. LINE input

Back panel

1. L/R output (Party speaker
L/R output)

2. L/R input (Audio input)

3. FM antenna

4. AC power socket

21

1

MIC IN

GUITAR IN

20

19 18 17

PL AYBACK CHARGING

A

B

2.1

2

3

MIC VOL

4

5
6

7
8

9

ECHO VOL

/

L

A

C

O

V

Q

E

J

D

T

BASS

C

E

F

F

E

TO

U

A

J

D

/

S

W

T

Y

T

R

A

P

N

AI

H

C

10

SOURCE

1

1

2

1

LIGHT GUITAR VOL

14

12

13 15 16

3

110000--224400VV~~5500/6/600HHzz

4

3

Instruction manual

Utilization of the product

If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.

Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.

Important safeguards

• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.

• Do not hit or drop the unit.

• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.

• Do not disassemble the unit yourself.
Refer servicing to qualified service personnel.

Power supply

• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.

• Insert the plug into power supply.

Caution: Always unplug the appliance from

power supply, when no use long time.

General operations

Line input/Audio input

You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speakers of this unit.

• To connect an external audio device,

please use a standard audio cable with 3.5-

mm-to-3.5 mm plugs to connect the input
terminal LINE IN/AUDIO IN (RCA L and R

inputs) on the unit.
Press SOURCE button on the unit to
switch to LINE IN/AUDIO IN mode. The
display screen will show "LINE/AUDIO".

• Turn on the external device. You cannot
control playback with the buttons of this unit
except adjusting the volume.

Audio output

Use a standard RCA audio cable to

connect the L and R audio outputs (Party

speaker outputs) to the corresponding audio
inputs of an external media device (CD, DVD,
VCR, VCD, etc.).

Volume control

Rotate the master volume knob to adjust the

general volume level of the unit.

You can also separately adjust the volume of
microphone (if connected), guitar (if
connected) and the echo effect by rotating the
corresponding knobs.

Equalizer

Press EQ button repeatedly to select an
equalizer mode.

Modes

Press the SOURCE button repeatedly to
select an operation mode: Bluetooth => LINE

IN/AUDIO IN => USB => RADIO
mode is available only if a USB storage device
is connected.

. The USB

Power on/off

When the unit is connected to the current
supply mains, press the POWER button

once to switch the unit on. Press this
button again to switch the unit off.

LED indicator light

Press repeatedly the LIGHT button to switch
between various lighting modes of the LED
indicator light.

4

Instruction manual

Bluetooth operation

• The Bluetooth pairing name of the unit is
TF-MS2101.

• Press the SOURCE button on the top
panel to switch to the corresponding
signal source, the Bluetooth icon will start
flashing on the display screen.

• Use your mobile phone to search the
Bluetooth signal of the unit, then input the
password 0000 if necessary. The units
are paired when the message BT and the
Bluetooth icon are lit.

• Switch off the Bluetooth function on your
mobile phone to disconnect the units.
When paired successfully for the first
time, this unit will automatically connect
the paired device when it switches on.

• Effective connection range is 10
meters.

• You can unpair the devices by
deleting the TF-MS2101 Bluetooth
connection from your mobile phone
connected devices list.

• In Bluetooth mode you can control
playback and volume using the
standard control elements of this
unit.

TWS connection

• The TWS (True Wireless Stereo)
Bluetooth connection can only be used
between the same two speakers.

• Power on both speakers, press and
hold the TWS button on both speakers
simultaneously, the both speakers will
display TWS ON on the display
screens.

• Press the NEXT/PREVIOUS buttons to
select between HOST and SLAVE,
wait a few seconds to pair
automatically, once connected
successfully, HOST will appear on the
display of the speaker which is
selected as the host, while the other
display will show SLAVE on the
display.

• Enable the Bluetooth function on your
mobile device and make sure it is in
searching mode.

• Select "TF-MS2101" from the list of
discovered devices and connect to it.

• The host speaker will act as the left
channel during TWS and will receive the

Bluetooth signal, the slave speaker will
act as the right channel to play music.

• Press and hold the TWS button to
disconnect the HOST/SLAVE speaker
connection in the TWS mode.

Microphone

• You can insert a microphone for
karaoke or other purposes into this

unit by connecting it to the
Microphone input.

• While connected, you can control
the microphone volume and echo
effect by rotating the corresponding
knobs.

Guitar

• You can connect a guitar to this
unit by connecting it using a

special 6.5 mm cable to the
Guitar input.

• While connected, you can
control the guitar volume by
rotating the corresponding knob.

4

5

USB operation

Instruction manual

USB playback

• Insert a USB device into the USB A port
of the unit. Press the SOURCE button to
select the USB mode. The unit will start
reading the device and start playback if any
supported audio files are found.

• When the device and tracks on it are
detected, the display shows the currently
playing track number, track playback time and
operation mode in turn.

Playback operations

• During playback press the PLAY/PAUSE
button on the unit to pause playback. Press
this button again to resume playback.

• During playback press PREVIOUS/NEXT
buttons to go to a previous or a next track.

• During playback press the BASS button
to enable the enhanced bass playback. Press

this button again to disable it.

• During playback press the AUTO DJ
and DJ EFFECT buttons to switch between
and apply various sound effects.

General USB notes

• This unit is equipped with a USB socket
that can read and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 32 GB.

Always switch off the unit or change
mode to another one before removing a USB
flash drive to prevent damage to your USB
device.

Note: Although this product is fully
compatible with USB 2.0 standard, a small
percentage of USB flash drives might not be
readable, due to those device manufacturers’
non-compliance with the full (official) USB
standards.

• FAT/FAT32 file system are supported.
According to the USB 1.1/2.0

Standard, usage of a USB device with power
current consumption exceeding 500 mA is not

recommended without supplementary power
supply.

Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.

Warning: use of external USB drives
containing BIN files in root directory may cause
malfunction of unit or damage to the software.

USB charging

• The USB B port is used to charge the
battery of any supported (DC 5V 1.2A)
external device from this unit.

• You cannot play music from devices
connected to the USB B port.

Radio operation

• Press the SOURCE button repeatedly
to select the RADIO (FM) mode.

• For FM reception extend the FM antenna.

• Press and hold the PLAY/PAUSE button

to automatically scan for available broadcasting
channels, press this button again to stop
scanning.

• Shortly press the PLAY/PAUSE button
to switch between preset station and frequency
selection.

• Shortly press the NEXT button to jump
to the next preset station. Press and hold this
button to manually increase (fine-tune) the
radio frequency.

• Shortly press the PREVIOUS button to

jump to the previous preset station. Press
and hold this button to manually decrease
(fine-tune) the radio frequency.

Note: in RADIO mode you can adjust the

volume, equalizer and bass as usual.

5

6