CONTROLS electronic stand-alone
Morse KE-4a controls
premium
engine control
(accepts these cables:)
Universal 3300/33C Types
(electronic control
— each lever controls throttle AND shift)
The KE-4 set the standard for reliability in marine electronic controls. Its simplicity and proven design make it the choice for most multi-station/multi-engine control pleasure and work boats. KE-4a controls are available in either single or twin lever binnacle mount versions for single or multiple stations and up to two engines.
Applications:
Electronic stand-alone controls are ideal for larger, multi-station boats, especially those applications in which a mechanical control cannot deliver the desired feel and performance. For nearly all engine types.
Use KE-4a if . . .
•There are more than 2 stations.
•Throttle and Shift are actuated mechanically (KE-4a has no electronic throttle interface).
•Trolling valve control required.
•Throttle Sync only is needed.
•Electrical system is 12 or 24 volt.
•Hand-held remote desired.
•CANBus interface is not needed. (If needed, see i6000.)
NOTE: When properly installed, these engine controls will connect to outboard, stern drive and inboard engines, utilizing an electronic interface, universal 3300/33C type cables and appropriate engine connection kits.
The boat's original mechanical control and 3300/33C cables (if so equipped) can be reused for the "get home" (emergency back-up) feature. The back-up control does not have to be mounted, but be certain that the cables used with this control are long enough so that the control can be operated from the steering station.
Features:
Works with most engines: outboard, stern drive or inboard.
Single or twin engine control; dual function for each lever.
Up to 4 control heads.
Optional hand-held remote control: great for docking and fishing!
Built-in Station Select switch. Engine Sync option available. Gear shift delay available.
Neutral engine warm-up provision. Mechanical backup (easy to use “get home” system).
Built-in overload protection & diagnostics. Visual failure alarm standard (audio alarm optional).
Uses standard 3300/33C type control cables on throttle/shift actuator. Easy to install. Plug-in connectors. 12 and 24 volt capability.
Meets/exceeds all applicable industry standards.
224 |
Telefl ex Marine Products: 610-495-7011 • www.telefl exmarine.com |
electronic control: mechanical throttle/shift, up to 4 stations
KE-4a
Engine
Controls
Basic
Ordering
Guide:
KE-4a
TOP MOUNT
ACTUATOR
ITEM DESCRIPTION |
PART # |
QTY. |
NOTES |
|
|
|
|
BASIC SYSTEM COMPONENTS: |
|
|
|
CONTROL HEAD - GOLD FINISH |
See next pages |
|
(SINGLE OR TWIN ENGINE) |
ELECTRONIC CONTROL UNIT |
See next pages |
|
(12 or 24 VDC) |
THROTTLE/SHIFT ACTUATOR |
NM0165-00 |
|
|
COMMUNICATION HARNESS |
NM0619-05 |
|
FOR TWIN ENGINE BOATS ONLY |
REMOTE CONTROL HARNESS |
See next pages |
|
CONTROL STATION 1 (IN METERS) |
REMOTE CONTROL HARNESS |
See next pages |
|
CONTROL STATION 2 (IN METERS) |
REMOTE CONTROL HARNESS |
See next pages |
|
CONTROL STATION 3 (IN METERS) |
REMOTE CONTROL HARNESS |
See next pages |
|
CONTROL STATION 4 (IN METERS) |
5 METER POWER |
NM0414-28 |
2 PER CONTROL UNIT |
|
SUPPLY HARNESS |
|
|
|
OR |
|
|
|
10 METER POWER |
NM0414-33 |
2 PER CONTROL UNIT |
|
SUPPLY HARNESS |
|
|
|
20 AMP CIRCUIT BREAKER |
NJ0514-00 |
2 PER CONTROL UNIT |
RECOMMENDED OPTION |
BUZZER |
See next pages |
|
(12 or 24 VDC) |
3300/33C SERIES CONTROL CABLE CC633XX |
|
CC633XX RECOMMENDED |
|
OPTIONAL UPGRADES: |
|
|
|
HAND HELD REMOTE: |
|
|
|
HAND HELD CONTROL KIT |
NM0906-00 |
|
TWIN ENGINE (26’ WIRE) |
HAND HELD CONTROL KIT |
NM0907-00 |
|
SINGLE ENGINE (26’ WIRE) |
REMOTE CONTROL HARNESS |
NM0616-XX |
|
XX=LENGTH IN METERS |
RELAY KIT (ENGINE CUT-OFF) |
|
|
(12 or 24 VDC) |
|
|
|
|
SUGGESTED MANUAL “GET HOME” BACKUP SYSTEM:
3300/33C SERIES CONTROL CABLES (2 PER ENGINE – 1 FOR THROTTLE, 1 FOR SHIFT) MECHANICAL CONTROL (ONE SINGLE FUNCTION TWIN LEVER CONTROL PER ENGINE, ONE DUAL FUNCTION
SINGLE LEVER CONTROL PER ENGINE OR ONE DUAL FUNCTION TWIN LEVER CONTROL FOR TWIN ENGINES)
NOTES:
Controls listed have popular gold tone finish. Several other finishes available. Contact Teleflex Marine for details.
All Wiring harnesses are measured in meters (1 meter = 39.37 inches).
XX = Control cable length in feet. Teleflex Control Cables are measured by the foot. For Morse, XXX = inches. Check with Engine Manufacturer for Engine Output information.
QUESTIONS? CALL TECH SUPPORT AT 610-495-7011.
|
Hand |
|
|
Held |
|
|
Remote |
|
|
|
|
ECU |
Control |
|
(ELECTRONIC |
Overview: |
|
|
|
|
CONTROL |
|
|
UNIT) |
|
|
HAND HELD
REMOTE
CONTROL
alone-stand electronic CONTROLS
Telefl ex Marine Products: 610-495-7011 • www.telefl exmarine.com |
225 |
Loading...