Teledyne LeCroy WaveSurfer 3022, WaveSurfer 3024, WaveSurfer 3034, WaveSurfer 3054 Assembly Instructions

Assembly Instructions

WaveSurfer 3000 Rackmount Accessory

Thank you for purchasing a Teledyne LeCroy WaveSurfer 3000 Rackmount accessory. Please review these
instructions before installing the rackmount.

Parts

The rackmount kit is shipped with the following parts. Contact us if parts are missing.

Parts QTY

Front plate with attached handles 1

Base plate 1

Side plates with pre-installed positioning brackets 2

M4x10 pan-head Phillips screws 10

M4x6 pan-head Phillips screws 6

NOTE: The kit does not include the fasteners needed to attach the rackmount to your equipment rack. Consult your
rack manufacturer regarding the appropriate type, size, and number of fasteners to install the rackmount securely.

Tools

You will need a Phillips screwdriver to attach the rackmount to the WaveSurfer 3000.

Installed Dimensions

Weight:

Height:

Width at front plate:

Width behind front plate:

Depth with handles:

Depth without handles:

Rack Us required:

18.8 lbs.

300 mm

480 mm

430 mm

265 mm

205 mm

7U

924964-00 September, 2014

WaveSurfer 3000 Rackmount Accessory

Installation

1. Attach the side plates to the base plate using six M4x6 screws, three on each plate.

2. Attach the front plate to the side plates using the remaining M4x10 screws.

2