Tektronix WFM 300A User Manual
Specifications and Main Features
- Model: WFM 300A
- Conductance Type: WFM Component Monitor
- Input: CH 1, CH 2, CH 3, Composite
- Horizontal Sweeps: 1 LINE, 2 LINE, 2 FLD
- Operating Modes: Waveform, Parade, Lightning, Vector
- Maximum Power:
- Voltage: 90 − 250 V
- Frequency: 48 Hz to 66 Hz
- Power: 35 Watts maximum
- Operating Temperature: 0 to 50 degrees Centigrade
- Non Operating Temperature: –55 to 75 degrees Centigrade
- Altitude: 15,000 feet operational, 50,000 feet non-operational
- Weight: 9 pounds (4 kg)
- Size:
- Height: 5 1/4 inches (133.4 mm)
- Width: 8 1/2 inches (215.9 mm)
- Length: 18 1/8 inches (460.4 mm)
- CRT display with viewing size 80 x 100 mm
- Edges include:
- Quick testing using internal calibration square to stop
- Coupling restoration of DC by adjusting the settings
- Functionality for Gamut Strobe of checking the signals.
- Control for remote permissions via 15 pin D-sub connector.
Frequently Asked Questions
Q1: What types of signals can WFM monitors work with?
A1: The WFM 300A is able to monitor three wire component signals and video television composite signals.
Q2: Can you explain how to make modifications to the vertical gain in WFM 300A?
A2: The midrange or V GAIN variable control located on the panel can be used to adjust the level of vertical gain.
Q3: Is there a list or a set package that comes with this WFM 300A?
A3: Yes, instruction manual, power cable, spare fuse, illumination bulbs are all standard accessories.
Q4: Is it possible to connect other external devices for remote control?
A4: WFM 300A accommodates that need since it has a REMOTE connector which enables remote functionality.
Q5: What can one assume as the average warranty period regarding WFM 300A?
A5: WFM 300A is said to be free from any defect in material or workmanship for three years from the date of shipment.
Q6: What can be considered as the utmost temperature and height limit for WFM 300A to function in?
A6: The maximum operating altitude for the device is up to 15,000ft and the operating temperature range is 0°C- +50°C.
Q7: How am I able to choose and switch between a number of different input signals?
A7: As for switching over input signals, you will be able to use the front panel INPUT CH 1, CH 2, CH 3 buttons to do so.
User Manual
Loading...