
Read This First
TMSPGC
PGA370 Single-Ended/Differential Clock
Hardware Support
Heatsink Holddown
061-4236-01
*P061423601*
061423601

Copyright E Tektronix, Inc. All rights reserved. Licensed software products are owned by Tektronix or its suppliers and
are protected by United States copyright laws and international treaty provisions.
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at DFARS 252.227-7013, or subparagraphs (c)(1) and (2) of the
Commercial Computer Software -- Restricted Rights clause at FAR 52.227-19, as applicable.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supercedes that in all previously published material. Specifications and price change privileges reserved.
Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Read This First
Before attaching a heatsink to the TMSPGC probe head, check Figure 1 for the
required heatsink part number and Figure 2 for the required heatsink height.
CAUTION. To prevent damage to the TMSPGC probe head, use the correct parts
and part numbers as indicated in both illustrations.
TMSPGC Read This First
Aluminum Heatsink
1.5 MM THICK IHS
Intel P/N A33474--001
Figure 1: Intel PGA370 FCPGA2 ETV
1

Read This First
Figure 2 shows the required heatsink height.
0.150 in (3.81 mm)
Figure 2: Required heatsink height
TMSPGC Read This First
2