Supplement
TDS 714L
Digitizing Oscilloscope
071-0628-00
This document applies to firmware version 5.1
and above.
*P071062800*
071062800
Copyright © T ektronix, Inc. All rights reserved.
T ektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and price change privileges reserved.
Printed in the U.S.A.
T ektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000
TEKTRONIX and TEK are registered trademarks of T ektronix, Inc.
TDS 714L Features
Most information in the TDS 500D, TDS 600B, & TDS 700D Digitizing
Oscilloscopes User manual is valid for the TDS 714L oscilloscope. This
supplement lists the unique features of the TDS 714L.
Key Features
Except for the features and capabilities outlined in this manual, the information
in your user manual (and other TDS documentation) applies to the TDS 714L.
Table 1 lists the key features of the TDS 714L. The pages that follow list the
TDS 714L features, options, and accessories.
T able 1: Key Features of the TDS 714L
Feature TDS 714L
Number of channels 4
Digitizing rate, maximum 500 MS/s
Number of Channels at maximum rate 4
Analog Bandwidth 500 MHz
Record Lengths, maximum To 250 K/Channel
DPO Acquisitions No
Hi Res Acquisitions Yes
Advanced DSP Math
Storage, Floppy Disk
Hard Disk
Zip 100/250 Drive Support
I/0 includes GPIB, RS–232 and Centronics Standard
Input Impedance 50 W and 1 MW
Measurement statistics (mean, min, max, and std dev) Standard
Waveform Histograms Standard
Java-based Applications Available
Display Color
1
Standard record length 130 K on 3 or 4 channels, 250 K on 1 or 2 channels. Option 2M adds longer record length settings.
See Option 2M on page 2.
2
Advanced digital signal processing provides FFTs, integrals, and derivatives of waveforms.
2
Standard
Standard
Option HD
Standard
1
TDS 714L Supplement
1
TDS 714L Features
Options
Options available for the TDS 714L are shown in Table 2:
T able 2: TDS 714L Options
Option # Label Description
A1 Universal European
power cord
A2 UK power cord 240 V , 50 Hz power cord
A3 Australian power cord 240 V , 50 Hz power cord
A4 North American power
cord
A5 Switzerland power cord 220 V , 50 Hz power cord
HD Hard disk drive Add a hard disk.
05 Video trigger Oscilloscope comes with tools for investigating events that occur when a video signal
1K Scope cart K420 scope cart. This cart can help transport the oscilloscope around many lab environ-
2M
1R Rackmount Oscilloscope comes configured for installation in a 19 inch
34 Differential probe Add a 1 GHz (probe only) P6247 differential probe
35 Active probe Add a 1 GHz (probe only) P6243 active probe
36 Passive probe Add a 500 MHz P6139A 10X passive probe
C3 Three years calibration Provides three years of calibration
D1 Calibration data report Oscilloscope comes with a calibration data report.
D3 Calibration data for C3 Provides calibration data for option C3
L1
8 M acquisition length
Manuals in French
220 V , 50 Hz power cord
240 V , 60 Hz power cord
generates a horizontal or vertical sync pulse. These tools allow investigation of a range of
NTSC, PAL, SECAM, and high definition TV signals.
ments.
Extend standard acquisition length as follows:
To 2 M samples on three or four channels, 4 M on two channels, and 8 M samples on one
channel
(Option includes a hard disk.)
wide instrument rack. For later field conversions, order Tektronix part number 016-1236-00.
Provides Language versions of User Manual, according to option number chosen.
L3
L5
L9
2
Manuals in German
Manuals in Japanese
Manuals in Korean
TDS 714L Supplement
Standard Accessories
TDS 714L Features
The oscilloscope comes standard with the accessories listed in Table 3.
T able 3: Standard accessories
Accessory Part number
User Manual with Programmers Manual Help Disk 071-0130-XX
TDS 714L Supplement 071-0628-XX
Reference 020-2313-XX
Technical Reference: Performance Verification and Specifications 071-0630-XX
Probes: Four P6139A 10X, 500 MHz Passive probes P6139A
Front Cover 200-3696-01
Accessory Pouch (only without Option 1R) 016-1268-00
U.S. Power Cord 161-0230-01
Optional Accessories
You can also order the optional accessories listed in Table 4.
T able 4: Optional accessories
Accessory Part number
Service Manual 071-0627-XX
Oscilloscope Cart K420
Rack Mount Kit (for field conversion) 016-1236-00
Accessory Pouch 016-1268-00
Soft-Sided Carrying Case 016-0909-01
Transit Case 016-1 135-00
GPIB Cable (1 meter) 012-0991-01
GPIB Cable (2 meter) 012-0991-00
Centronics Cable 012-1214-00
RS-232 Cable 012-1298-00
TDS 714L Supplement
3
TDS 714L Features
Accessory Probes
Table 5 lists the recommended probes for the oscilloscope.
T able 5: Recommended probe cross reference
Probe 714L
Passive
1X
10X P6139A
100X P5100
1000X P6015A
SMD P6563A
Active CMOS/TTL P6243
Logic P6408
Differential Digital/Telecom P6246, P6247
Micro Volt ADA400A
High Voltage P5205
Current AC Only P6021
Current AC/DC TCP202
Electro-Optical Converter P6701B
P6101B
P5210
P6022
CT-1
CT-2
AM503S
P6703B
4
TDS 714L Supplement
Loading...