Tektronix TDS7000B Datasheet

Digital Phosphor Oscilloscopes

TDS7000B Series

Superior Measurement Fidelity, Unrivaled Analysis,
Uncompromised Usability

The TDS7000B Series’ unique combina­tion of superior measurement fidelity,
unrivaled analysis and uncompromised
usability makes it the ultimate test
machine to simplify and speed the design
of high-speed, complex systems. This
family offers the industry’s best solution
to the challenging signal integrity issues
faced by designers verifying, character­izing and debugging sophisticated
electronic designs.
They deliver up to 7.25 GHz (typical)
true analog bandwidth, down to 43 ps
rise time (20% to 80%), and 20 GS/s
maximum real-time sample rate to
capture critical events with fine detail.

Exclusive DPX
enables waveform capture rates up
to 400,000 wfms/s to quickly find rare
glitches in seconds or minutes, instead
of hours or days. Innovative software
solutions deliver domain expertise for
advanced analysis and compliance
testing, while the OpenChoice
enables users to integrate their expertise
through the ability to easily write custom
programs or utilize popular commercial
software. The intuitive graphical user
interface delivers sophisticated capability
to advanced users without intimidating
occasional users.

®

acquisition technology

®

architecture

Features & Benefits

Up to 7.25 GHz True Analog
Bandwidth and Down to 43 ps
Rise Time (20% to 80%)

>400,000 wfms/s Waveform
Capture Rate, Powered by Exclusive
DPX®Acquisition Technology

20 GS/s Maximum Real-time
Sample Rate

Exceptional Delta-time Accuracy
for High Confidence in Critical
Timing Measurements

MyScope®Custom Control
Windows Enhance Productivity

Right Mouse Click Menus
for Exceptional Efficiency

Powerful Triggering Features for
Fast Detection of Relevant Faults

Communications Mask Testing
Up to 4.25 Gb/s Rates

Clock Recovery from Serial Data
Streams up to 3.125 Gb/s

Up to 64 MB Record Length
with MultiView Zoom™for Quick
Navigation of Long Records

TekConnect®Interface for
High Fidelity Connection

Classic Direct Controls,
Touch-sensitive Display
or Mouse Navigation

OpenChoice®with Microsoft
Windows 2000 Delivers Built-in
Networking and Analysis

XGA 1024x768 Display

Applications

Signal Integrity, Jitter
and Timing Analysis

Verification, Debug
and Characterization of
Sophisticated Designs

Design, Development and
Compliance Testing of Serial Data
Streams Up to 4.25 Gb/s Rates

Debug of Telecom, Datacom
and Storage Area Network
Equipment Designs, and
High-speed Backplanes

Spectral Analysis
Investigation of

Transient Phenomena

Digital Phosphor Oscilloscopes

TDS7000B Series

MyScope®Custom
Control Windows

MyScope control windows allow you
to build your own control windows with
only the controls, features and capabilities
that you care about and are important
in your job. For the first time you can
create your own personalized “toolbox”
of oscilloscope features. No longer do
you need to search through menus for
features or re-learn how to drive the
oscilloscope after a break from the lab.
MyScope control windows are easily
created in a matter of minutes using a
simple, visual, drag-and-drop process.
Once created, these customized windows
are easily accessed through a dedicated
MyScope button and menu selection
on the oscilloscope button/menu bar, just
like any other control window. You can
make an unlimited number of custom
control windows, enabling each person
who uses the oscilloscope in a shared

environment to have their own unique
control window. Since the contr ol windows
are stored as files on the hard drive,
they can easily be transferred to other
CSA7000B, TDS5000B or TDS6000B/C
Series oscilloscopes, or they can even be
e-mailed to a co-worker around the world
when the need arises. MyScope control
windows will benefit all oscilloscope
users, from eliminating the ramp-up time
that many face when returning to the lab
after not using an oscilloscope for a while,
to the power user who can now operate
far more efficiently. Everything you need is
found in one control window rather than
having to constantly navigate through
menu after menu to repeat similar tasks.

Right Clicks

Right mouse click menus make simple
things as they should be – simple.
Right click menus are context sensitive,
meaning the choices presented in the
menu depend on where you right clicked

the mouse. This makes right click menus
extremely intuitive. Want to change the
cursor type? Right click on a cursor or
the cursor readouts. Want to change the
reference levels of an automatic measure­ment? Right click on the measurement.
Want to change trigger parameters?
Right click on the trigger readouts. Want
to change a waveform’s color? Right click
on the waveform handle. Virtually all
objects on the oscilloscope display have
right click menus associated with them
that include all the appropriate actions or
features relative to those objects. There
are also right click menus for regions of
the display in addition to just objects.
For example, right clicking in the main
graticule brings up a menu with choices
such as Clear Data, Default Setup,
Autoset, Screen Captures, Save All
Waveforms and Add Screen Text, providing
single-click access to many of your most
commonly performed tasks.

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

2

Digital Phosphor Oscilloscopes

TDS7000B Series

Characteristics

Vertical System

TDS7054 TDS7104 TDS7154B TDS7254B TDS7404B TDS7704B

Input Channels 4 4 4 4 4 4
Hardware Analog 500 MHz 1 GHz 1.5 GHz

*1

Bandwidth (–3 dB) (typical), 7GHz

Rise Time 10% 800 ps 400 ps 200 ps 130 ps 100 ps 62 ps
to 90% (typical)

Rise Time 20% 135 ps 83 ps 72 ps 43 ps
to 80% (typical)

DC Gain Accuracy 1% ±(2% + ±2.5% +

(2% x offset) (2% x offset)

Hardware Bandwidth 250 MHz or 20MHz Requires TCA-1 MEG
Limits

Input Coupling AC, DC, GND DC, GND
Input Impedance 1MΩ ±0.5% or 50 Ω ±1% 50 Ω ±2.5%
Input Sensitivity,1 MΩ 1 mV/div to 10 V/div —
Input Sensitivity,50 Ω 1 mV/div to 1 V/div 2 mV/div to 1 V/div
Vertical Resolution 8-Bit (>11-Bit with averaging) 8-Bit (>11-Bit with averaging)
Max Input Voltage, ±150 V CAT I Derate at 20 dB/decade —

1MΩ to 9 V
Max Input Voltage, 5V

, with peaks less than ±30 Volts <1 V

RMS

above 200 kHz

RMS

for <100 mV/div, <5 V

RMS

50 Ω Also determined by TekConnect®accessory
Offset Range 1 mV/div to 100 mV/div: ±1 V 2 mV to 50 mV/div: ±0.5 V

101 mV/div to 1 V/div: ±10 V 50.5 mV to 99.5 mV: ±0.25 V

1.01 V/div to 10V/div: ±100 V 100 mV to 500 mV: ±5 V

Channel-to-Channel ≥100:1 at 100 MHz and ≥80:1 at 1.5 GHz and
Isolation Any Two ≥30:1 at the rated bandwidth ≥15:1 at the rated bandwidth
Channels at Equal
Vertical Scale Settings ≥≥≥≥

*1

At ≥10 mV/div.

*1

2.5 GHz

for ≥100 mV/div settings

RMS

505 mV to 1 V/div: ±2.5 V

4 GHz

*1

7.25 GHz

*1

guaranteed

*1

Note:Typical system bandwidth of TDS7404B with P7240:4GHz.
Note:Typical system bandwidth of TDS7404B with P7330:3.5GHz.
Note:Typical system bandwidth of TDS7704B with P7260:6GHz.
Note:Typical system bandwidth of TDS7704B with P7350:5GHz.
Note:Typical system bandwidth of TDS7704B with P7380:7GHz.

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

3

Digital Phosphor Oscilloscopes

TDS7000B Series

Time Base System

TDS7054/TDS7104 TDS7154B/TDS7254B/

TDS7404B/TDS7704B

Time Base Range 200 ps/div to 40 s/div 50 ps to 10 s/div
Time Base Delay Time Range 16 ns to 250 s 5 ns to 250 s
Channel-to-Channel Deskew Range ±25ns ±75 ns
Delta Time Measurement Accuracy ±((0.06/sample rate) + (15 ppm x reading)) RMS ±((0.06/sample rate) + (2.5 ppm x reading)) RMS
Trigger Jitter (RMS) 8 ps

Long Term Sample Rate and Delay ±15 ppm over ≥1 ms interval 2.5 ppm over any ≥100 ms interval
Time Accuracy

Acquisition System

TDS7054 TDS7104 TDS7154B/ TDS7254B/

Real-time Sample Rates

1 channel (max) 5 GS/s 10 GS/s 20 GS/s
2 channels (max) 5GS/s 5 GS/s 10 GS/s
3-4 channels (max) 2.5 GS/s 2.5 GS/s 5 GS/s
Equivalent Time Sample Rate (max) 250 GS/s 250 GS/s 1TS/s
Maximum Record Length per Channel 2 Mb (1-CH.), 1 Mb (2-CH.), 500 Kb (4-CH.) 4 Mb (1-CH.), 2 Mb (2-CH.),

with Standard Memory 1 Mb (4-CH.)

With Memory Opt. 2M 8 Mb (1-CH.), 4 Mb (2-CH.),

With Memory Opt. 3M 16 Mb (1-CH.), 8 Mb (2-CH.),

With Memory Opt. 4M 32 Mb (1-CH.), 16 Mb (2-CH.),

With Memory Opt. 5M 64 Mb (1-CH.), 32 Mb (2-CH.),

(typical) 2 ps

RMS

2 Mb (4-CH.)

4 Mb (4-CH.)

(typical) (7254B/7154B)

RMS

1.5 ps

1.2 ps

(typical) (7404B)

RMS

(typical) (7704B)

RMS

TDS7404B/ TDS7704B

8 Mb (4-CH.)

16 Mb (4-CH.)

Maximum Duration at Highest Real-time Resolution (1-CH)

TDS7054 TDS7104 TDS7154B/TDS7254B/

TDS7404B/TDS7704B

Time Resolution (Single-shot) 200 ps (5 GS/s) 100 ps (10 GS/s) 50 ps (20 GS/s)
Max Duration with Standard Memory 400 µs 200 µs 200 µs
Max Duration with Opt. 2M 1.6 ms 800 µs 400 µs
Max Duration with Opt. 3M 3.2 ms 1.6 ms 800 µs
Max Duration with Opt. 4M 1.6 ms
Max Duration with Opt. 5M 3.2 ms

4

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

Digital Phosphor Oscilloscopes

TDS7000B Series

Acquisition Modes

TDS7054/TDS7104 TDS7154B/TDS7254B/

TDS7404B/TDS7704B

FastAcq Acquisition Powered by exclusive DPX®acquisition technology,FastAcq optimizes the instrument

for analysis of dynamic signals and capture of infrequent events
Maximum FastAcq Waveform Capture Rate >200,000 wfms/sec >400,000 wfms/sec
Waveform Database Accumulate Waveform Database providing three-dimensional array of amplitude,time and counts
Sample Acquire sampled values
Peak Detect Captures narrow glitches at all real-time sampling rates
Minimum Peak Detect Pulse Width ≤1 ns 400 ps
Averaging From 2 to 10,000 waveforms included in average
Envelope From 2 to 2x109waveforms included in min-max envelope
Hi-Res Real-time boxcar averaging reduces random noise and increases resolution
FastFrame™Acquisition Acquisition memory divided into segments; maximum trigger rate >265,000 waveforms per second.

Time of arrival recorded with each event

Trigger System

TDS7054 TDS7104 TDS7154B/TDS7254B/

TDS7404B/TDS7704B

Sensitivity

Internal DC Coupled 0.35 div DC to 50 MHz 0.35 div DC to 50 MHz 0.5 div DC to 50 MHz

increasing to 1 div a t 500 MHz increasing to 1 div at 1 GHz increasing to 1.5 div at 3 GHz

TDS7404B/TDS7704B:

2.7 div a t 4 GHz (typical)

External (Auxiliary Input) 400 mV from DC to 50 MHz 250mV from DC to 50 MHz 150 mV from DC to 50 MHz

increasing to 750 mV a t 100 MHz increasing to 500mV at 100 MHz increasing to 500 mV at 2.5 GHz
Main Trigger Modes Auto, Normal and Single
Trigger Sequences Main,Delayed by Time,Delayed by Events.All sequences can include separate

horizontal delay after the trigger event to position the acquisition window in time

Trigger Characteristics

Standard Trigger Types Edge, Glitch, Runt, Width, Transition Time, Edge, Glitch, Runt, Width, Transition

Timeout,Pattern, State, Setup/Hold Time,Timeout,Pattern, State, Setup/

Hold,Window - all except Edge, Pattern,

and State can be logic qualified

Communications-related Triggers Support for AMI, HDB3, BnZS, CMI, MLT3 and NRZ encoded communications signals.
(requires Option SM) Select among isola ted positive or negative one, zero pulse form or eye patterns as applicable to standard

Serial Pattern Trigger 64-Bit serial word recognizer,bits specified in binary (high,low, don’t care)
(requires Option ST) or hex format.Trigger on NRZ-encoded data up to 1.25GBaud

Trigger Level Range

Internal ±12 divisions from center of screen
External (Auxiliary In) ±8 V ±5 V
Line fixed at 0 V
Trigger Coupling DC, AC (attenuates <60 Hz), HF Rej (attenua tes >30 kHz), LF Rej (attenua tes <80 kHz), Noise Reject (reduces sensitivity)
Trigger Holdoff Range 250 ns minimum to 12 s maximum

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

5

Digital Phosphor Oscilloscopes

TDS7000B Series

Clock Recovery System (Option SM, ST)

TDS7154B/TDS7254B/TDS7404B/TDS7704B

Clock Recovery Phase Locked Loop Bandwidth Fbaud/1600 typical
Tracking/Acquisition Range ±2% of requested baud
Clock Recovery Jitter (Typical) 0.25% period +5 ps

or 4 ps

for repeating “011”data patterns

RMS

Input Sensitivity for Clock Recovery 1 division peak-to-peak displayed signal
Input Data Rates 1.5 Mbaud to 3.125 Gbaud

for PRBS data pattern

RMS

Trigger Modes

Edge – Positive and/or negative slope on any
channel or front panel auxiliary input. Coupling
includes DC,AC,noise reject, HF reject and
LF reject.
Glitch – Trigger on or reject glitches of positive,
negative or either polarity.Minimum glitch width is

1.0 ns with 200 ps resolution (TDS7104/TDS7054).
Minimum glitch width is 170 ps (TDS7704B) or
225 ps (all other B models) with rearm time of
250 ps (B models).
Width – Trigger on width of positive or negative
pulse (down to 170 ps on B models) either within
or out of selectable time limits – 1 ns.
(TDS7104/TDS7054) or 340 ps (B models) to 1 s).
Runt – Trigger on a pulse that crosses one
threshold but fails to cross a second threshold before
crossing the first again. Optional time qualification.

Timeout – Trigger on an event which remains high,
low or either,for a specified time period, selectable
from 1 ns (TDS7104/TDS7054) or 340 ps (B models)
to 1 s with 200 ps (TDS7104/TDS7054) or 100 ps
(B models).
Tr ansition– Trigger on pulse edge rates that are
faster or slower than specified. Slope may be positive,
negative or either.
Setup/Hold – Trigger on violations of both setup
time and hold time between clock and data present
on any two input channels.
Pattern – Trigger when pattern goes false or stays
true for specified period of time. Pattern (AND, OR,
NAND, NOR) specified for four input channels
defined as HIGH, LOW or Don’t Care.
State – Any logical pattern of channels (1, 2, 3)
clocked by edge on channel 4. Trigger on rising
or falling clock edge.

Window – Trigger on an event that enters or exits a
window defined by two user-adjustable thresholds.
Event can be time or logic qualified (B models only)
Logic Qualified Trigger applicable to Glitch, Width,
Runt,Timeout,Transition,Setup/Hold,Window trig­gers – trigger on the specified event only if the logic
state defined with the remaining unused channels
occurs (B models only).

Trigger Delay by Time–

16 ns (5 ns for B models) to 250 s.

Trigger Delay by Events –

1 to 10,000,000 Events.

6

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

Digital Phosphor Oscilloscopes

TDS7000B Series

Waveform Measurements

Amplitude – Amplitude, High, Low, Maximum,
Minimum, Peak-to-Peak, Mean, Cycle Mean, RMS,
Cycle RMS, Positive Overshoot,Negative Overshoot.
Time – Rise Time, Fall Time, Positive Width, Negative
Width, Positive Duty Cycle, Negative Duty Cycle,
Period, Frequency,Delay.

Combination – Area,Cycle Area, Phase, Burst Width.
Histogram-related – Waveform Count, Hits in box,

Peak hits, Median, Maximum, Minimum, Peak-to­Peak, Mean (µ),Standard Deviation (σ),µ+1σ,
µ+2σ,µ+3σ.
Eye Pattern-related (B models only) – Extinction
Ratio (absolute, % and dB), Eye Height, Eye Top,Eye
Base, Eye Width,Crossing %, Jitter (Peak-to-Peak,
RMS and 6σ),Noise (Peak-to-Peak and RMS), S/N
ratio, Cycle Distortion, Q-factor.

Waveform Processing/Math

Algebraic Expressions – Define extensive algebraic
expressions including waveforms, scalars and
results of parametric measurements e.g., (Integral
(CH.1-Mean(CH.1)) x 1.414).
Arithmetic – Add, subtract, multiply,divide wave­forms and scalars.

Relational – Boolean result of comparison >, <, ≥,
≤,==, !=.

Calculus – Integrate,differentiate.
Frequency Domain Functions – Spectral magnitude

and phase, real and imaginary spectra.
Vertical Units – Magnitude: Linear,dB, dBm;
Phase: Degrees, radians.
Window Functions – Rectangular,Hamming,
Hanning, Kaiser-Bessel,Blackman-Harris, Gaussian,
Flattop2,Tek Exponential.
Waveform Definition – As arbitrary math expression.

Display Characteristics

Display Type– Liquid crystal active-matrix
color display.

Display Size – Diagonal: 264 mm (10.4 in.).
Display Resolution – TDS7104/TDS7054:

640 horizontal x 480 vertical pixels.
TDS7154B/TDS7254B/TDS7404B/TDS7704B:
1024 horizontal x 768 vertical pixels.
Waveform Styles – Vectors, Dots, Variable
Persistence, Infinite Persistence.

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

7

Digital Phosphor Oscilloscopes

TDS7000B Series

Computer System and
Peripherals

CPU – TDS7104/TDS7054: Intel Celeron processor,
850 MHz.
TDS7154B/TDS7254B/TDS7404B/TDS7704B: Intel
Pentium IV processor,2.8 GHz
PC System Memory – 1GB

*2

.

*2

.
Hard Disk Drive – 40 GB removable hard disk
drive: rear-panel or (B models only) front-panel,
(Option FHD).
Floppy Disk Drive – 1.44 MB 3.5 in. floppy disk
drive: front-panel, or (B models only) rear-panel
(Option FHD).
CD-R/W Drive – Rear-panel CD-R/W drive with CD
creation software application.

Mouse – Thumb wheel model included,USB interface.
Keyboard – Mini keyboard included (fits in pouch);

PS-2 interface. Order 119-6633-00 for full-size
keyboard; USB interface and hub.

*2

Available September 2004.

Input/Output Ports

Probe Compensator Output – Front panel BNC
connector,requires Probe Cal-Deskew Fixture
(included) for probe attachment.Amplitude 200 mV
(TDS7104/TDS7054) or 500mV (B models) ±20%
into a 50 Ω load, frequency 1 kHz ±5%.
Analog Signal Output Amplitude – Front-panel
BNC connector,provides a buffered version of the
signal that is attached to the Ch 3 input when Ch 3
is selected as trigger source. 20 mV/div ±20% into
a 1.8 MΩ load, 10 mV/div ±20% into a 50 Ω load.

Analog Signal Output Bandwidth,Typical –

TDS7054,TDS7104:100 MHz into a 50 Ω load.
TDS7154B/TDS7254B/TDS7404B/TDS7704B:
1 GHz into a 50 Ω load.
External Time Base Reference In– Rear-panel
BNC connector,time base system can phase-lock
to external 10 MHz reference.
Time Base Reference Out – Rear-panel BNC
connector,accepts TTL-compatible output of internal
10 MHz reference oscillator.
Auxiliary Output Levels – Front-panel BNC
connector,provides a TTL-compatible, polarity
switchable pulse when the oscilloscope triggers.

Parallel Port – IEEE 1284, DB-25 connector.

Audio Ports – Miniature phone jacks for stereo

microphone input and stereo line output.
USB Port – Allows connection or disconnection
of USB keyboard and/or mouse while oscilloscope
power is on. B models have 2 USB ports.

Keyboard Port – PS-2 compatible.
Mouse Port – PS-2 compatible.
LAN Port – RJ-45 connector,supports 10Base-T

and 100Base-T.

Serial Port – DB-9 COM1 port.
Windows Video Port – 15 pin D-Sub connector on

the rear panel; connect a second monitor to use
dual-monitor display mode.Video is DDC2B compliant.

GPIB Port – IEEE 488.2 standard.
Scope Video Port – 15 pin D-Sub connector

on the rear panel, video is IBM XGA compatible on
B models. Connect to show the oscilloscope display,
including live waveforms on an external monitor or
projector.The primary Windows desktop can also
be displayed on an external monitor using this port.

Power Source

Power – 100 to 240 V

±10%, 400 Hz; CATII,<300 W (450 VA).

115 V

RMS

, ±10%, 50/60 Hz;

RMS

8

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

Digital Phosphor Oscilloscopes

TDS7000B Series

Physical Characteristics
Benchtop Configuration

Dimensions mm in.

Height 277 10.9
Width 455 17.9
Depth 425 16.75

Weight kg lbs.

Net 19.1 42.0
Shipping 37 85

Physical Characteristics
Rackmount Configuration

Dimensions mm in.

Height 277 10.5
Width 502 19.75
Depth 486 19.125

Weight kg lbs.

Net 18.6 41
Kit 5.6 12.25

Mechanical

Cooling - Required Clearance

mm in.

Top 0 or >76 0 or >3
Bottom 0 0
Left side 76 3
Right side 76 3
Front 0 0
Rear 0 0

Environmental

Temperature –

Operating: 0 ºC (TDS7104/TDS7054) or +5 ºC
(B models) to +50 ºC, excluding floppy disk and
CD-R/W drives; +10 ºC to +45 ºC, including floppy
disk and CD-ROM drives.
Nonoperating: –22 ºC to +60 ºC.

Humidity –

Operating: 20% to 90% relative humidity with a
maximum wet bulb temperature of +29 ºC at or
below +50 ºC, noncondensing.Upper limit derated
to 25% relative humidity at +50 ºC.
Nonoperating:With no diskette in floppy disk drive.
20% to 90% relative humidity with a maximum wet
bulb temperature of +29 ºC at or below +60 ºC,
noncondensing. Upper limit derated to 20% relative
humidity at +60 ºC.

Altitude –

Operating: 10,000 ft.(3,048 m).
Nonoperating: 40,000 ft.(12,190 m).

Random Vibration –

Operating: 0.000125 G
350 Hz, –3 dB/octave from 350 to 500 Hz,

0.0000876 G

RMS

.

of 0.24 G
Nonoperating: 0.0175 G
–3 dB/octave from 100 to 200 Hz,0.00875 G
from 200 to 350 Hz, –3 dB/octave from 350 to
500 Hz, 0.006132 G

RMS

.

of 2.28 G

2

/Hz from 5 to

2

/Hz at 500 Hz. Overall level

2

/Hz from 5 to 100 Hz,

2

/Hz at 500 Hz. Overall level

2

Electromagnetic Compatibility – 89/336/EEC.
Safety – UL 3111-1, CSA 1010.1, EN61010-1.2

IEC 61010-1.

/Hz

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

9

Digital Phosphor Oscilloscopes

TDS7000B Series

Ordering Information

TDS7054

500 MHz Digital Phosphor Oscilloscope.

TDS7104

1 GHz Digital Phosphor Oscilloscope.
TDS7104 and TDS7054 Include:(4) P6139A

500 MHz, 10x Passive Probes, accessory pouch,
front cover,mouse, probe calibration and deskew
fixture (067-0405-xx), quick reference kit
(020-2404-xx), user manual (071-1035-xx),
TDS7000 Series product software CD-ROM,
TDS7000 Series operating system restoration
CD-ROM,TDS7000 Series optional applications
software CD-ROM, performance verification procedure
PDF file, GPIB programmer’s reference (on product
software CD-ROM), calibration certificate documenting
NIST traceability,2 540-1 compliance and
ISO9000, power cord, one year warranty.

TDS7154B

1.5 GHz Digital Phosphor Oscilloscope.

TDS7254B

2.5 GHz Digital Phosphor Oscilloscope.

TDS7404B

4 GHz Digital Phosphor Oscilloscope.

TDS7704B

7 GHz Digital Phosphor Oscilloscope.

TDS7154B,TDS7254B,TDS7404B and
TDS7704B Include: Accessory pouch, front cover,

mouse, user manual (071-1226-xx), quick reference
kit (020-2519-xx),TDS7000B Series product software
CD-ROM 063-3632-00 (TDS7154/7254/7404B)
063-3633-00 (TDS7704B),TDS7000B Series
operating system restoration CD-ROM,TDS7000B
Series optional applications software CD-ROM,
performance verification procedure PDF file, GPIB
programmer’s reference (on product software CD­ROM), calibration certificate documenting NIST
traceability,2 540-1 compliance and ISO9000,
power cord, one year warranty.

For TDS7154B and TDS7254B Only,Also
Includes: (4) TekConnect

(TCA-BNC), (2) TekConnect high-impedance
buffer amplifiers (TCA-1MEG), and deskew
fixture (067-0405-xx).

For TDS7404B and TDS7704B Only,Also
Includes: (4) TekConnect to SMA adapters (TCA-SMA).

For TDS7404B Only, Also Includes: Deskew fixture

(067-0405-xx).
TDS7704B Only,Also Includes: Deskew fixture

(067-0484-xx).
Please specify disk drive and power cord option

when ordering.

®

to BNC adapters

Instrument Options
Power Plug Options

Opt. A0 – North America power.
Opt. A1 – Universal EURO power.
Opt. A2 – United Kingdom power.
Opt. A3 – Australia power.
Opt. A5 – Switzerland power.
Opt. A6 – Japan power.
Opt. A99 – No power cord or AC adapter.
Opt. A10 – China power.

Mounting Options

1K – K4000 Oscilloscope Cart.
1R – Rackmount Kit.

Disk Drive Options (for
TDS7154B, TDS7254B,
TDS7404B and TDS7704B only)

Opt. FHD – Front-panel 40 GB removable hard
disk drive, replaces floppy disk drive that goes
on the rear-panel.

Service Options

Opt. C3 – Calibration Service 3 Years.
Opt. C5 – Calibration Service 5 Years.
Opt. D1 – Calibration Data Report.
Opt. D3 – Calibration Data Report 3 Years

(with Option C3).
Opt. D5 – Calibration Data Report 5 Years

(with Option C5).

Opt. R3 – Repair Service 3 Years.
Opt. R5 – Repair Service 5 Years.

Recommended Accessories
Probes

P7380 – >8 GHz Z-Active™Differential Probe.
P7380SMA – >8 GHz Differential Signal

Acquisition System.
P7350 – 5 GHz differential probe recommended

for TDS7404B/TDS7704B.

P7350SMA – 5 GHz SMA Input differential Probe.
P7260 – 6 GHz active probe recommended for

TDS7404B/TDS7704B.

P6158 – 3 GHz, 20x Low C Probe.
P6247 – 1.0 GHz Differential Probe.
P6139A – 500 MHz, 10x Passive Probe.
P6245 – 1.5 GHz Active Probe.
P6248 – 1.7 GHz Differential Probe.
P7240 – 4 GHz Active Probe.
P7330 – 3.5 GHz Differential Probe.

Adapters

TCA-1MEG – TekConnect high-impedance
buffer amplifier.

TCA-SMA – TekConnect-to-SMA Adapter .
TCA-N – TekConnect-to-N Adapter .
TCA-BNC – TekConnect-to-BNC Adapter .
TCA75 – 4 GHz precision TekConnect 75 Ω to

50 Ω adapter with 75 Ω BNC input connector.
AFTDS – Telecom differential electrical interface

adapter (for line rates <8 MB/s; requires TCA-BNC
adapter for TDS7404B).

Cables

GPIB Cable (1 m) – Order 012-0991-01.
GPIB Cable (2 m) – Order 012-0991-00.
RS-232 Cable – Order 012-1298-00.
Centronics Cable – Order 012-1214-00.

Test Fixtures

TDSUSBF – TDSUSB test fixture for use with
Opt. USB.

Software

WSTRO – WaveStar™waveform capture
and documentation software.

Miscellaneous

Keyboard (USB Interface) – Order 119-6633-00.
Service Manual – TDS7054/TDS7104:

Order 071-0711-xx.
TDS7154B/TDS7254B/TDS7404B/TDS7704B:

Order 071-0898-xx.
Transit Case – Order 016-1522-00.

10

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

Digital Phosphor Oscilloscopes

TDS7000B Series

Options (available on models indicated by “x”)

TDS7054 TDS7104 TDS7154B TDS7254B TDS7404B TDS7704B

Acquisition Memory Options

2M 8 Msamples max, x x x x x x

2 Msamples/ch

3M 16 Msamples max, x x x x x x

4 Msamples/ch

4M 32 Msamples max, x x x x

8 Msamples/ch

5M 64 Msamples max, x x x x

16 Msamples/ch

Software Options

DVI TDSDVI DVI Compliance x x x

Test Solution

DVD TDSDVD Optical x x x x x x

Storage Analysis

ET3 TDSET3 Ethernet Compliance x x x x x x

Test Software

JA3 TDSJIT3 Advanced Jitter x x x x x x

Analysis Software
JE3 TDSJIT3 Essentials x x x x x x
J2 TDSDDM2 Disk Drive x x x x x x

Analysis Software
CP2*1TDSCPM2 ANSI/ITU Telecom x x x x x x

Pulse Compliance

Testing Software
USB*2TDSUSBS USB2.0 x x x x x x

Compliance Test S/W Only
SM Serial Communications x x x x x x

Mask Testing
ST Serial Pattern Trigger x x x x
PW3 TDSPWR3 Power Measurement x x x x x x

and Analysis Software
RTE Serial Data Compliance and x x x x

Analysis Software
PCE*3PCI Express™Compliance xx

Module for Option RTE
IBA*3InfiniBand Compliance xx

Module for Option RTE

*1Requires Option SM.

2

Requires Option TDSUSBF (USB Test Fixture).

*

3

Requires Option RTE.

*

To view instrument upgrades for the TDS7000 and TDS7000B Series, please go to www.tektronix.com/tds7000b_upgrades.

Digital Phosphor Oscilloscopes • www.tektronix.com/oscilloscopes

11

Digital Phosphor Oscilloscopes

TDS7000B Series

ASEAN / Australasia / Pakistan (65) 6356 3900

Contact Tektronix:

Austria [phone]

Balkan, Israel, South Africa and other ISE Countries [phone]

Belgium 07 81 60166

Brazil & South America 55 (11) 3741-8360

Canada 1 [phone]

Central East Europe, Ukraine and the Baltics [phone]

Central Europe & Greece [phone]

Denmark [phone]

Finland [phone]

France & North Africa [phone]

Germany [phone]

Hong Kong (852) 2585-6688

India (91) 80-22275577

Italy [phone]

Japan 81 (3) 6714-3010

Luxembourg [phone]

Mexico, Central America & Caribbean 52 (55) 56666-333

Middle East, Asia and North Africa [phone]

The Netherlands 090 02 021797

Norway 800 16098

People’s Republic of China 86 (10) 6235 1230

Poland [phone]

Portugal 80 08 12370

Republic of Korea 82 (2) 528-5299

Russia & CIS 7 095 775 1064

South Africa [phone]

Spain ([phone]

Sweden 020 08 80371

Switzerland [phone]

T aiwan 886 (2) 2722-9622

United Kingdom & Eire [phone]

USA 1 [phone]

For other areas contact Tektronix, Inc. at: 1 [phone]

Updated 15 June 2005

Our most up-to-date product information is available at:

www.tektronix.com

Product(s) are manufactured

in ISO registered facilities.

Copyright © 2005,Tektronix, Inc. All rights reserved.Tektronix products are
covered by U.S. and foreign patents,issued and pending. Information in this publi­cation supersedes that in all previously published material. Specification and price
change privileges reserved. TEKTRONIX and TEK are registered trademarks of
Tektronix,Inc.All other trade names referenced are the service marks, trade­marks or registered trademarks of their respective companies.

07/05 HB/WOW 55W-13766-10