xx
SPECMONBUP (Software Options)
SPECMONB Series Real-Time Spectrum Analyzers
ZZZ
Software Only Upgrades
Instructions
www.tektronix.com
P075106700*
*
075-1067-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Kit description
Products
Option kit parts list
This kit provides instructions to activate software upgrades to the SPECMONB
Series Real-Time Signal Analyzers.
The option you’ve ordered only requires that you enter a key code to activate
your option.
For a list of available options, see the Tektronix Web site (www.tektronix.com) or
your Tektronix representative.
SPECMON3B. Allserialnumbers
SPECMON6B. Allserialnumbers
SPECMON26B. All serial numbers
ty
Quanti
1 ea 075-1067-xx
1ea
1ea
1ea
Minimum tool and equipment list
Name Description
Keyboard
mber
Part nu
N/A LABEL, MANUFACTURED; OPTION KEY UPG RADE
N/A LABEL, MANUFACTURED; PRODUCT LABEL, SAFETY
ption
Descri
INSTRUCTIONS, UPGRADE: SPECMONBUP SOFTWARE
NS
OPTIO
L 2.100 X 2.700, SAFETY CONTROLLED
LABE
TROLLED
CON
NOTE. Not included with all options.
N/A LAB
EL, EXPORT CONTROL CLASSIFICATION
NOTE. The Export Control label is only included with
Options 09, 65, or 6566.
Standard accessory provided with the
instrument
SPECMONB Series Software Options Upgrades 1
Install option key
Install option key
To activate your new option, you must enter a new option key.
1. Power on the instrument.
2. Select Tools > Install Upgrades... to start the upgrade installation process.
3. Click Continue from the Install Upgrades introduction screen.
2 SPECMONB Series Software Options Upgrades
Install option key
4. Enter the optio
instructions to install the option.
n key provided by Tektronix, and follow the on-screen
5. Power off the instrument, then power back on.
6. In the H
7. Verify the new option is listed.
elp menu, select About Tektronix Real-Time Analyzer.
SPECMONB Series Software Options Upgrades 3
Verify instrument software version
Attach labels
Please attach all labels provided in this kit on the instrument’s rear panel.
Attach the option key label
Attach the product/option
label
Attach the Export Control
classification label
Verify i
nstrument software version
Place the new option key label over the existing label on the instrument rear panel.
NOTE. This label is not included with all options.
Place the new product key label over the existing label on the instrument rear
panel if this label is included with your option.
Place the E
NOTE. The Export Control label applies only to the SPECMONB Series
instruments when installing Options 09, 65, or 6566.
Tektro
your instrument.
1. Selec
xport Control classification label on the instrument rear panel.
nix recommends to update to the latest available application software for
t Help > About to check the software version.
2. Use your Web browser to go to: www.tektronix.com/software.
3. Search for your instrument’s model number and follow the link to the software.
4. If the installed software is older than that available, download the software.
5. Follow the instructions on the Web page to install the software.
nd of Document ■
■ E
4 SPECMONB Series Software Options Upgrades
Loading...