®
®
7 4 0 a n d 7 4 0 L
0
1
2
3
4
7
8
16
20
21
26
32
33
37
38
41
42
Symbols
Note
General information
Caution
Use caution or damage to the printer may result.
Hot
Hot surface on or in the printer. Use caution to avoid
personal injury.
Copyright © 1998 by Tektronix, Inc. All rights reserved.
Tektronix
®
and Phaser® are registered trademarks of Tektronix, Inc.
1
To order supplies and accessories, contact your local dealer or visit
the Tektronix web site:
www.tek.com/Color_Printers/supplies
Accessories Order number Description
Paper T rays
436-0282-02 A/Letter (U.S.)
436-0283-02 A4 (Metric Letter)
436-0314-02 Legal
Transparenc y Tra ys
436-0284-02 A/Letter (U.S.)
436-0285-02 A4 (Metric Letter)
Automatic Duplex /
Lower T ray Assembly
ZDPLX Includes one each: Duplex Unit,
Paper tray, and Transparency tray;
order option 01 for Metric.
Printer Cart
ZCARTA
Cleaning Kit
016-1710-00
Alcohol Cleaning Wipes
006-7824-01 Pack of 10
Printer CD-ROM
063-3079-00 -00 English
-10 French
-20 Italian
-30 German
-40 Spanish
-70 Chinese,
Simplified
-80 Chinese,
Traditional
-90 Korean
Printer Diskettes
063-3078-00
2
for
.
External Hard Disk
ZDISK
■
Required for collation
■
Extends font capacity
■
Requires Plus Feature set
PhaserShare
®
Network Card
■
Easy to install
■
Increases speed and shareability
■
High-performance network connectivity
ZNBFE
100Base-T Ethernet
ZNBTR
Token Ring
ZNBLT
LocalTalk
PhaserLink ™
Software
Requires network
connection via TCP/IP
■
View printer status using any web browser.
■
Control printer settings.
■
Link to online documentation via the World
Wide Web.
■
Receive electronic mail when consumables are
low or other printer maintenance is required.
Additional memory
■
Improved performance
ZMB32
32 Mbytes
ZMB64
64 Mbytes
ZMB128
128 Mbytes
3
TekColor
™
Color Corrections
Automatic
■
Automatically applies the best color correction mode to
each element on the page.
SWOP
■
Specification for Web Offset Publications. Used to
match U.S. press standards.
Euroscale
■
Used to match equivalent Imation Matchprint
®
proofs.
Commercial
■
Used to match commercial Imation Matchprint
®
proofs.
Toyo
■
Used to match commercial Toyo printing inks on
coated paper.
DIC
■
Used to match Dai Nippon printing inks on coated
paper.
None
■
No color correction made to colors.
■
Used with the PANTONE
®
Color Chart for PANTONE
®
Color matching.
Vivid Color
■
Produces the brightest possible colors.
sRGB Display
■
Adjusts color to closely approximate the colors on a
standard display screen.
To learn more about using color,
visit our color web site:
www.colorize.com
4
PAPER
A4
33100-38
T ransparency Tray
Tektronix
transparencies only
■
Tray sizes:
A/Letter A4
■
100-sheet capacity
■
Always use Tektronix
transparencies for best
results
33100-20
TRANSPARENCY
A4
5
2
, 60 lb.
2
, 40 lb.
2
, 90 lb.
Media sizes supported in the Multi-Purpose Tray
Metric:
88.9 x 254 mm – 216 x 355.6 mm
U.S.: 3.5 x 10 in. – 8.5 x 14 in.
33100-21
6
Print screen (using a
Margins
Bottom
Sides
.16 in.
(4.1 mm)
.14 in.
(3.6 mm)
2
34
1
33100-22
7
PAPER
A4
1
2
3
5
4
TRANSPARENCY
A4
33100-48
Loading Media Trays
8
2
, 20 - 28 lb.
2
, 29 - 40 lb.
3
2
1
33100-23
Multi-Purpose Tray
9
2
(29 - 40 lb.)
Cover stock up to 163 g/m2(60 lb.)
Card stock up to 163 g/m
2
(40 lb.)
Index up to 163 g/m
2
(90 lb.)
Tektronix Fabric Transfer media
Laser labels
#10 Envelopes
2
(28 lb.) in the Multi-Purpose Tray,
Thin Thick
Medium
33100-24
10
Never use media for inkjet printers; inkjet media may damage
the Fuser. Tektronix laser media are specially designed for
this printer.
1234567
<105 g/m
2
28 lb.
>105 g/m
2
28 lb.
33100-25
11
Glossy Coated Paper
2
Feed Fabric Transfer Media one sheet at a time; otherwise the
media may jam.
33100-26
12
first
in
33100-47
Place
Stamp
Here
Place
Stamp
Here
3
2
4
1
13
Guidelines for envelope printing
■ Use envelopes that are at least #10-size
(4.13 x 9.5 in. / 104.1 x 241.3 mm).
■ No plastic windows or metal clips.
■ No exposed gummed surfaces.
■ Tuck the gummed flap into the envelope.
■ Single-sided printing only.
■ Keep unused envelopes in their original packaging.
This printer is not made to handle high-capacity production
envelope printing. Envelopes may wrinkle depending on weight
and stiffness of envelope media.
14
first
.
1
2
33100-46
15
Guidelines for printing on labels
■ Recommended labels: Use Avery labels.
■ Each label is at least 25.4 x 66.7 mm (1 x 2.625 in.) in size.
Smaller labels may peel off and damage printer
components.
■ If any of the labels on a sheet are missing, do not use that
sheet; it may damage printer components.
■ When selecting Label as the media type, the printer
requires that room temperature be cooler than 27˚ C
(81˚ F). If the temperature is above this, the printer reports
an error and stops printing.
16
.
For best results with duplex printing,
use 90 g/m2 (24 lb.) laser paper.
PAPER
A4
1234567
a
b
c
Legal
Paper
A/Letter
Paper
Duplex
Paper
33100-37
1
2
17
5 In the Print screen, select the Duplex option
and
a binding
preference:
Macintosh Drivers:
LaserWriter 8.5.1
■ From the pull-down menu, choose Layout.
■ Select Print on Both Sides.
■ Select a binding preference.
LaserWriter 8.3.4
■ Click Options.
■ Select 2-Sided Printing.
■ Select Short-Edge Binding or Long-Edge Binding.
PC Drivers:
Windows 95/
Windows 98
■ Click Properties.
■ Click Paper.
■ Click More Options and select your binding
preference.
Windows NT4
■ Click Properties.
■ Click Advanced.
■ Under Paper/Output, select your option for
Print on Both Sides.
Duplex Printing
18
. This example shows
2
, 24 - 28 lb.
2
, 29 - 40 lb.
Two-sided printing on specialty media can
shorten component life.
For best results with duplex printing, use 90
g/m2
(24 lb.) laser paper.
32564-06
1234567
Duplex Printing
19
.
2
, 24 - 28 lb.
2
, 29 - 40 lb.
32564-07
1234567
20
26
8
21
For detailed troubleshooting information, refer to the Advanced Features
and T roubleshooting Manual on the printer’s CD-ROM or web site.
Power
Error
Consumables Page
<--- ---> Print
<color>:replace
Power
Error
=
33100-01
Toner
Imaging Unit
Main Charge Grid
Fuser Roll
Transfer Kit
Fuser
Black
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Magenta
Cyan
Yellow
0% 50% 100%
%
Life Remaining
Count (Pages)
Serial #
Avg. Toner Coverage/Color
Date Installed
0% 50% 100%
%
Life Remaining
Count (Pages)
Serial #
Avg. Toner Coverage/Color
Date Installed
0% 50% 100%
%
Life Remaining
Count (Pages)
0% 50% 100%
%
Life Remaining
Count (Pages)
0% 50% 100%
%
Life Remaining
Count (images)
OK
OK
OK
OK
1
2
Power
Error
Service Print 1
<--- ---> Print
=
Test Print
Black
Cyan
Magenta
Yellow
3
22
Replace the Toner Cartridge.
1 Adjust the color density (see
page 38).
2 Replace the Toner Cartridge.
23
1 Use Tektronix media.
2 Use the correct media tray for
the media you are using.
3 When using the Multi-Purpose
Tray, select the correct media in
the front panel.
4 Print about 25 blank pages until
the problem disappears.
5 Replace the Imaging Unit.
24
2) Replace Imaging Unit, or Fuser, or Fuser Roll or Main Charge Grid.
1 Remove, then re-insert the Main
Charge Grid.
2 Replace the Main Charge Grid.
Hints
■ Use Tektronix media.
■ Use the correct media tray for
the media you are using.
■ When using the Multi-Purpose
Tray, select the correct media in
the front panel.
■ Relative humidity may be too low
(below 30% relative humidity).
33100-34
25
2) Replace Imaging Unit, or Fuser, or Fuser Roll or Main Charge Grid.
for the Multi-Purpose Tray and
face-up
for the transparency
If
Jam at C, clear the media jam.
Print 10-20 blank pages to clean
the roller.
■ If you still see the problem,
replace the Fuser Roll.
■ If you still see the problem,
replace the Fuser.
26
E
B
A
D
Duplex Unit
C
Multi-Purpose
33100-0
7
27
33100-09
Jam at B
Solution 1
Open the lower left side door
and remove the jammed
media.
Solution 2
Remove the selected media
tray (middle or lower tray) and
remove the jammed media
from inside the printer.
33100-10
A/Letter
Paper
A/Letter
Paper
33100-11
28
or
The Fuser is hot. To avoid personal injury, use caution or
wait for it to cool before touching it.
a
1
2
b
a
b
c
33100-12
4
3
29
The Fuser is hot. To avoid personal injury, use caution or
wait for it to cool before touching it.
.
4
Solution 2
1 Open the front door
and
the right side door.
2 Turn the Fuser’s large blue knob
counterclockwise
.
3 Remove the jammed media.
33100-14
3
2
1
30
33100-16
Jam at Multi-Purpose Tray
1 Remove all media in the
Multi-Purpose Tray.
2 Remove the jammed media
from the Multi-Purpose Tray.
3 Set the Media Thickness
switch for the media you are
using (page 9).
4 Re-insert the media in the
Multi-Purpose Tray.
Open and close the printer’s front door to clear the error
message.
33100-17
31
13
4
5
2
33100-18
32
Replacement cleaning kit 016-1710-00
Use isopropyl alcohol (at least 90% pure) with a lint-free cloth.
Do not use alcohol that has any additives; it can damage the
printer.
33100-49
Phaser
®
740 Color Printer
Clean Pick Rollers
12
34
5
Clean 4 Feed Rollers
Clean Duplex Unit
12
123 4
6
8
9
90%
Isopropyl
alcohol
90%
Isopropyl
alcohol
L
e
g
a
l
P
a
p
e
r
A
/L
e
tte
r
P
a
p
e
r
Middle
<-- -->
Select Tray
<-- -->
Menu
Clean
Clean
Clean
Menu
Menu
Menu
Menu
Lower
<-- -->
Select Tray
<-- -->
Menu
Clean
90%
Iso
p
ro
p
yl
alco
h
o
l
Print Instructions
<--- ---> Print
<--- ---> Menu
Cleaning
33100-65
33
Print the menu map from the front panel; keep it by the printer for
easy reference.
Test Print
Black
Cyan
Magenta
Yellow
OK
OK
Help Pages
scrolls backward
enters the sub-menu
scrolls forward
exits without a change
accepts the new setting
Exit
Menu
MenuPress
Exit
Menu
Exit
Menu
Exit
Menu
Exit
Menu
Exit
Menu
Exit
Menu
Exit
Menu
Exit
Menu
Exit
Menu
Consumables Report
TekColor Correction
Print Quality
Printer Defaults
Cleaning
Calibrate Margins
Calibrate Colors
Network Settings
Language
Exit
Menu
Optional configuration
Standard
Premium Monochrome
Print Instructions
Demonstration Page
Service Print 1
Service Print 2
RGB Sampler Prints
CMYK Sampler Prints
Menu Map
Adjust Light / Dark Adjust Each Color
Print Page Adjust Left Margin Adjust Top Margin
Page Count
Imaging Unit
Automatic
SWOP
Euroscale
Transfer Kit
Fuser
Commercial
Toyo
DIC
Premium
Fast Monochrome
Select Tray
Token Talk
NetWare
HTTP
Français
Deutsch
Startup Mode
Output Order
Error Handler
Image Smoothing
Energy Star Timeout
Fuser Roll
Main Charge Grid
None
Vivid Color
sRGB Display
Fast Color
Presentation
Check Print
Check Print Timeout
Authorization Codes
DNS
Usage Profile e-mail
Italiano
Japanese
Default Tray
Multi-Purpose Media
Duplex
Print Mode
Startup Page
Token Ring
TCP / IP
EtherTalk
English (default)
Español
Consumables Page
Configuration Page
Startup Page
Usage Profile
Phaser® 740 Color Printer
Usage Profile
Toner
Imaging Unit
Main Charge Grid
Fuser Roll
Transfer Kit
Fuser
Black
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: TBD%
Magenta
Cyan
Yellow
0% 50% 100%
%
Life Remaining
Count (Pages)
Serial #
Avg. Toner Coverage/Color
Date Installed
0% 50% 100%
%
Life Remaining
Count (Pages)
Serial #
Avg. Toner Coverage/Color
Date Installed
0% 50% 100%
%
Life Remaining
Count (Pages)
0% 50% 100%
%
Life Remaining
Count (Pages)
0% 50% 100%
%
Life Remaining
Count (images)
OK
OK
OK
OK
Phaser® 740 Color Printer
Configuration
33100-66
12
3
4 5
Help Pages
34
Toner
Imaging Unit
Main Charge Grid
Fuser Roll
Transfer Kit
Fuser
Black
Page Remaining: >500 @ 5% coverage
Your average coverage/page: 7.3%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: 9.1%
Page Remaining: >500 @ 5% coverage
Your average coverage/page: 2.9%
Magenta
Cyan
Yellow
0% 50% 100%
91 %
Life Remaining
Count (Pages): 214
Serial #00:00:00:00:00:00:00:00:00:00
Avg. Toner Coverage/Color 5.49%
Date Installed: 10/1/98
0% 50% 100%
98 %
Life Remaining
Count (Pages): 341
Serial #00:00:00:00:00:00:00:00:00:00:00
Avg. Toner Coverage/Color: 12.25%
Date Installed: 8/1/98
0% 50% 100%
96 %
Life Remaining
Count (Pages):1903
0% 50% 100%
98%
Life Remaining
Count (Pages):4977
0% 50% 100%
98%
Life Remaining
Count (images): 105
Date installed: 12/17/98
Date installed: 01/13/99
OK
OK
OK
OK
Page Remaining: >500 @ 5% coverage
Your average coverage/page: 7.3%
33100-4
4
050
g
Count (Pages): 341
S/N: 00:00:00:00:00:00:00:00:00:00
Avg. Toner Coverage/Color: 12.25%
Date Installed: 8/1/98
Page Remaining: >500 @ 5% coverage
Your average coverage/page: 11.5%
Count (Images): 214
S/N: 00:00:00:00:00:00:00:00:00:00
Avg. Toner Coverage/Color: 12.25%
0 50 100
91
Life Remaining
Consumables Information
35
Phaser® 740 Color Printer
Usage Profile
36
37
Fuser Roll 15,000 pages
Fuser 60,000 pages
Main Charge
Grid
30,000 images
*
Based on an average of 5% coverage of the printable area (at 600 dpi) for any one
color on laser paper. The replacement frequency varies with the complexity of the
prints, the percentage of coverage, and media type. Printing on specialty media
may reduce consumable life. Refer to “User-replaceable components” on the
printer’s CD-ROM or web site for more details.
Component Average Life*
33100-
3
38
Adjust Light/Dark Adjust Each Color
Calibrate Colors
Menu
Exit
33100-30
3
Cyan Magenta Yellow Black
Color Reference Page
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
Cyan Magenta Yellow Black
Color Reference Page
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
-10
-8
-6
-4
-2
0
+2
+4
+6
+8
+10
Color Density Samples
1
2
®
740 Color Laser Printer
®
740 Color Laser Printer
40
41
TekSMART™ Knowledge Base
Online Color Resource
■ Application issues
■ Networking issues
■ Printer errors
■ Print quality issues
■ Troubleshooting
■ Latest tips from technical support
www2.tek.com/merlin/tko
■ Step-by-step lessons
■ Using clip art
■ Articles and product reviews
■ Tips and techniques
■ Templates and tools
■ Questions and answers
www.colorize.com
Getting Information
42
Customer Support Centers
Australia
1-800-811-177
Austria
0660 5804
Belgium
02 720 9602
Brazil
0800 16 0220
Canada
1-800-835-6100
China
10-6235-1230
Denmark
(44) 533 444
Eastern Europe and
the Middle East
+44 1908 68187
Finland
0203 206 30
France
01 69 86 8137
Germany
0180 525 3535
Hong Kong
2585-6655
India (South Asia)
(91) 80-227-5577
Italy
02 45 287 000
Japan
81 3 3448 4872
Korea
2-528-5299
Luxembourg
400 847
Netherlands
(040) 267 0440
New Zealand
+61 2 9888 0100
Norway
(22) 723 801
Singapore (ASEAN)
1-800-356-5565
Spain
902 239 272
Sweden
(08) 299 071
Switzerland
155 9493
Taiwan
(02) 2757-1571
Thailand
2-645-4407
U.K.
(01) 908 681 707
U.S.
1-800-835-6100
V3
063-3100-00
Loading...