xx
MSO3000 and DPO3000 Series Oscilloscopes
ZZZ
Declassification and Security
Instructions
www.tektronix.com
077-0307-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
TekSecure is a trademark of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O . B ox 5 00
Beaverton, OR 97077
USA
For product information, sales, s ervice, and technical support:
In North America, call 1-800-833-9200.
Worl d wide , vi s it www.tektronix.com to find contacts in your area.
Table of Contents
Preface .............................................................................................................. iii
Clear and Sanitize Procedures. ... ... ... . ... ... ... ... . .. . ... ... ... . ... ... ... .. .. . ... ... ... .. .. . ... ... ... . ... ... ... . 1
Memory Devices............................................................................................... 1
Data Export
Built-In Security Features .................. .................................. ................................ ..... 5
When to Use TekSecure...................... .................................. ............................... 5
What TekSecure Does......................................................................................... 5
Disable the LAN Port and Clear LAN Ethernet Settings.. ... . ... ... ... . . .. . ... ... ... .. .. . ... ... ... .. .. . .. 6
Disable the USB Device Port................................................................................. 7
Clear an
d Sanitize a Non-Functional Instrument.. . .. . ... ... ... .. .. . ... ... ... . . .. . ... ... ... . . .. . ... ... ... ... . .. . 9
Devices........................................................................................... 3
MSO3000 and DPO3000 Series Declassification and Security Instructions i
Table of Contents
ii MSO3000 and DPO3000 Series Declassification and Security Instructions
Preface
If you have data security concerns, this document helps you to sanitize or remove
memory devices from the MSO3000 and DPO3000 Series Digital Phosphor
Oscilloscop
The MSO3000 and DPO3000 series products have data storage (memory) devices
and data out
sanitize the memory devices, and also tell you how to declassify an instrument
that is not functioning.
Instrument code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flashmemoryor
on USB d rives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.
es.
put devices (USB ports). These instructions tell you how to clear or
Products
Related Documents
The following Tektronix products are covered by this document:
MSO30
MSO3034
MSO3032
MSO3014
MSO3012
DPO3054
DP
DPO3034
DPO3032
DPO3014
DPO3012
The MSO3000 and DPO3000 Series Digital Phosphor Oscilloscopes Service
Manual, part number 071-2667-XX, is available on the Tektronix Web site at
www.tektronix.com/manuals.
54
O3052
MSO3000 and DPO3000 Series Declassification and Security Instructions iii
Loading...