Tektronix MSO2000 Series, DPO2000 Series, MSO2012, DPO2012, MSO2014 Datasheet
...
Mixed Signal Oscilloscopes
MSO2000 Series, DPO2000 Series Data Sheet
Connectivity
USB 2.0 Host Port on the Front Panel for Quick and Easy Data S torage
USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or
Direct Printing to a PictBridge
Optional 10/100 Ethernet Port for Network Connection and Video Out
Port to Export the Oscilloscope Display to a Monitor or Projector
®
-compatible Printer
Features & Benefits
Key Performance Specifications
200, 100 MHz Bandwidth Models
2 and 4 Analog Channel Models
16 Digital Channels (MSO Series)
1 GS/s Sample Rate on All Channels
1 Megapoint Record Length on All Channels
5,000 wfm/s Maximum Waveform Capture Rate
Suite of Advanced Triggers
Ease of Use Features
Wave Inspector®Controls Provide Easy Navigation and Automated
of Waveform Data
Search
FilterVu™ Variable Low-pass Filter Allows for Removal of Unwanted
Signal Noise while still Capturing High-frequency Events
29 Automated Measurements, and FFT Analysis for Simplified
Waveform Analysis
TekV P I®Probe Interface Supports Active, Differential, and Current
s for Automatic Scaling and Units
Probe
7 in. (180 mm) Widescreen TFT-LCD Color Display
Footprint and Lightweight – Only 5.3 in. (134 mm) deep and 7 lb.
Small
14 oz. (3.6 kg)
Optional Se
Automated Serial Triggering, Decode, and Search Options for I2C, SPI,
CAN, LIN, an
rial Triggering and Analysis
d RS-232/422/485/UART
Mixed Signal Design and Analysis (MSO Series)
Automated Triggering, Decode, and Search on Parallel Buses
Multichannel Setup and Hold Triggering
Feature-rich Tools for Debugging Mixed
Signal Designs
Offering up to 200 MHz ba ndwidth and 1 GS/s sample rate, the
MSO/DPO2000 Mixed Signal Oscilloscope Series delivers advanced debug
features at an e ntry-level price. With up to 20 cha nnels for analyzing analog
al signals, you can quickly find and diagnose problems in complex
and digit
designs. To capture long windows of signal activity while maintaining
fine timing resolution, the M SO/DPO2000 offers a deep record length of
1 Mpoints standard on all channels.
With Wave Inspector
automated serial and parallel bus analysis, the MSO/DPO2000
Oscilloscope Series from Tektronix provides the feature-rich tools you need
to simplify and speed debug of your complex design.
®
controls for rapid waveform navigation and
Data Sheet
Discover – A waveform capture rate of 5,000 wfm/s maximizes the probability of capturing
elusive glitches and other infrequent events.
Comprehensive Features Speed Every Stage
of Debug
The MSO/DPO2000 Series offers a robust set of features to speed every
stage of debugging your design – f
capturing it, to se arching your waveform record for the event and analyzing
its characteristics and your device’s behavior.
Discover
To debug a design problem, first you must know it exists. Every
design engine
er spends time looking for problems in their design, a
time-consuming and frustrating task without the right debug tools.
The MSO/DPO2000 Series offers complete visualization of signals,
providing fast insight into the real operation of your device. A waveform
capture r
ate of 5,000 waveforms per second enables you to see glitches
and other infrequent transients quickly, revealing the true nature of device
faults. A digital phosphor display with intensity grading shows the history
of a signal’s activity by intensifying areas of the signal that occur more
frequently, providing a visual display of just how often anomalies occur.
rom quickly discovering an anomaly and
Capture – Triggering on a specific transmit data packet going across an RS-232 bus. A
complete set of triggers, including triggers for specific serial packet content, ensures you
quickly capture your event of interest.
Capture
Discovering a device fault is only the first step. Next, you must capture the
event of interest to identify root cause.
The MSO/DPO2000 Series provides a complete set of triggers – including
runt, logic, pulse width/glitch, setup/hold violation, serial packet, and parallel
data–tohe
lp quickly find your event. With up to a 1 Mpoint record length,
you can capture many events of interest, even thousands of serial packets,
in a single acquisition for further analysis while maintaining high resolution
to zoom in on fine signal details.
From triggering on specific p acket content to automatic decode in
multiple data formats, the MSO/DPO2000 Series provides integrated
support for a broad range of serial buses – I
2
C,SPI,CAN,LIN,and
RS-232/422/485/UART. The ability to decode up to two serial and/or parallel
buses sim
ultaneously means you gain insight into system-level problems
quickly.
To fur t h e
r help troubleshoot system-level interactions in complex embedded
systems, the MSO2000 Series offers 16 digital channels in addition to
its analog channels. Since the digital channels are fully integrated into
the oscilloscope, you can trigger across all input channels, automatically
time-correlating all analog, digital, and serial signals.
2 www.tektronix.com
Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series
Search–I2C decode showing results from a Wave Inspector search for Address value
50. Wave Inspector controls provide unprecedented efficiency in viewing and navigating
waveform data.
Search
Finding your event of interest in a long waveform record can be time
consuming without the right search tools. With today’s record lengths
pushing to
a million data points, locating your event can mean scrolling
through thousands of screens of signal activity.
The MSO/DP
search and waveform navigation with its innovative Wave Inspector
O2000 Series offers the industry’s most comprehensive
®
controls. These controls speed panning and zooming through your record.
With a unique force-feedback system, you can move from one end of your
record to the other in just seconds. User marks allow you to mark any
location that you may want to reference later for further investigation. Or,
cally search your record for criteria you define. Wave Inspector
automati
will instantly search your entire record, including analog, digital, and serial
bus data. Along the way it will automatically mark every occurrence of your
defined event so you can quickly move between events.
Analyze – FFT analysis of a pulsed signal. A comprehensive set of integrated analysis
tools speeds verification of your design’s performance.
Analyze
Verifying that your prototype’s performance m atches simulations and meets
the project’s design goals requires analyzing its behavior. Tasks can range
from simple checks of rise times and pulse widths to sophisticated power
loss analysis and investigation of noise sources.
The MSO/DPO2000 Series offers a compre hensive set of integrated
analysis tools including waveform- and screen-based cursors, 29
automated measurem ents, and F FT analysis. Specialized application
support for serial bus analysis is also available.
For extend
ed analysis, National Instrument’s LabVIEW SignalExpress™
Tektronix Edition provides over 200 built-in functions including time and
frequency domain analysis, limit testing, data logging, and customizable
reports.
www.tektronix.com 3
Data Sheet
Wave Inspector controls provide unprecedented efficiency in viewing, navigating, and
analyzing waveform data. Zip through your 1 Mpoint record by turning the outer pan
control (1). Get from the beginning to end in seconds. See something of interest and want
to see more details? Just turn the inner zoom control (2).
Wave Inspector®Navigation and Search
A 1 Mpoint record length represents thousands of screens of information.
The MSO/DPO2000 Series enables you to find your event in seconds with
Wave Inspe
Wave Inspector offers the following innovative controls:
Zoom/Pan
A dedicated, two-tier front-panel control provides intuitive c ontrol of both
zooming and panning. The inner control adjusts the zoom factor (or zoo m
scale); t
zoom factors, while turning it counterclockwise results in lowe r zoom factors
and eventually turning zoo m off. No longer do you need to navigate through
multiple menus to adjust your zoom view. The outer control pans the zoom
box across the waveform to quickly get to the portion of waveform you are
interested in. The outer control also utilizes force-feedback to determine
how fast t
faster the zoom box moves. Pan direction is changed by simply turning the
control the other way.
Play/Pause
A dedicated Play/Pause front-panel button scrolls the waveform across the
display automatically while you look for anomalies or an event of int erest.
Playback speed and direction are controlled using the intuitive pan control.
Once again, turning the control further makes the waveform scroll faster and
changing direction is as simple as turning the control the other way.
ctor, the industry’s best tool for navigation and search.
urning it clockwise activates zoom and goes to progressively higher
o pan on the waveform. The farther you turn the outer control, the
Search step 1: You define what you would like to find.
Search step 2: Wave Inspector automatically searches through the record and marks each
event with a hollow white triangle. You can then use the Previous and Next buttons to
jump from one event to the next.
User Marks
Press the Set Mark front-panel button to place one or more marks on
the waveform. Navigating between marks is as simple as pressing the
Previous (←)andNext (→) buttons on the front panel.
Search Marks
The Searc
h button allows you to automatically search through your long
acquisition looking for user-defined events. All occurrences of the event
are highlighted with search marks and are easily navigated to, using the
front-panel Previous (←) and Next (→) buttons. Search types include
edge, pulse width/glitch, runt, logic, setup and hold, rise/fall time parallel
bus, and I
2
C, SPI, CAN, LIN, and RS-232/422/485/UART packet content.
4 www.tektronix.com
Mixed Signal Oscilloscopes — MSO2000 Series, DPO2000 Series
Digital phosphor technology enables a 5,000 wfm/s waveform capture rate and real-time
intensity grading on the MSO/DPO2000 Series.
The MSO Series provides 16 integrated digital channels enabling you to view and analyze
time-correlated analog and digital signals.
Digital
The MSO/DPO2000 Series’ digital phosphor technology provides you with
fast insight into the real operation of your device. Its waveform capture rate
of 5,000 wfm/s gives you a high probability of quickly seeing the infrequent
problems common in digital systems: runt pulses, glitches, timing issues,
and more.
Waveforms are superimposed with one another and waveform points that
occur mo
Phosphor Technology
re frequently are intensified. This quickly highlights the events
With the color-coded digital waveform display, groups are created by simply placing digital
channels together on the screen, allowing the digital channels to be moved as a group.
You can set threshold values for each pod of eight channels, enabling support for up to
two different logic families.
that over time occur m ore often or, in the case of infrequent anomalies,
occur less
With the MSO/DPO2000 Series, you can choose infinite persistence
or variabl
acquisitions stay on-screen. This allows you to determine how often an
anomaly is occurring.
Mixed Sign
(MSO Serie
The MSO2000 Series Mixed Signal Oscilloscopes provide 16 digital
channels
interface, simplifying operation and making it possible to solve mixed-signal
issues easily.
often.
e persistence, determining how long the previous waveform
al Design and Analysis
s)
. These channels are tight ly integrated into the oscilloscope's user
Color-coded Digital Waveform Display
The MSO2000 Series has redefined the way you view digital waveforms.
One common problem shared by both logic analyzers and m ixed -signal
oscilloscopes is determining if data is a one or a zero when zo omed in far
enough that the digital trace stays flat all the way across the display. The
MSO2000 Series has color-coded digital tra ces, displaying ones in green
and zero
sinblue.
www.tektronix.com 5
Loading...