Tektronix DPO2012, DPO2014, DPO2024, MSO2012, MSO2014 Declassification

xx

DPO2000 and MSO2000 Series Oscilloscopes

ZZZ

Declassification and Security

Instructions

www.tektronix.com

077-0108-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

TekSecure is a trademark of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.
14200 SW Karl Braun Drive
P.O . B ox 5 00
Beaverton, OR 97077
USA

For product information, sales, s ervice, and technical support:

In North America, call 1-800-833-9200.
Worl d wide , vi s it www.tektronix.com to find contacts in your area.

Table of Contents

Preface .............................................................................................................. iii

Clear and Sanitize Procedures. ... ... ... . ... ... ... ... . .. . ... ... ... . ... ... ... .. .. . ... ... ... .. .. . ... ... ... . ... ... ... . 1

Memory Devices............................................................................................... 1

Data Export

Built-In Security Features .................. .................................. ................................ ..... 5

When to Use TekSecure...................... .................................. ............................... 5

What TekSecure Does......................................................................................... 5

Disable the LAN Port and Clear LAN Ethernet Settings.. ... . ... ... ... . . .. . ... ... ... .. .. . ... ... ... .. .. . .. 6

Disable the USB Device Port................................................................................. 7

Clear an

d Sanitize a Non-Functional Instrument.. . .. . ... ... ... .. .. . ... ... ... . . .. . ... ... ... . . .. . ... ... ... ... . .. . 9

Devices........................................................................................... 3

DPO2000 and MSO2000 Series Declassification and Security Instructions i

Table of Contents

ii DPO2000 and MSO2000 Series Declassification and Security Instructions

Preface

If you have data security concerns, this document helps you to sanitize or remove
memory devices from the DPO2000 and MSO2000 Series Digital Phosphor and
Mixed Signal

The DPO2000 and MSO2000 series products have data storage (memory) devices
and data out
sanitize the memory devices, and also tell you how to declassify an instrument
that is not functioning.

Instrument code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flashmemoryor
on USB d rives connected to the instrument.

If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.

Oscilloscopes.

put devices (USB ports). These instructions tell you how to clear or

Products

Related Documents

The following Tektronix products are covered by this document:

DPO20

DPO2014

DPO2012

MSO2024

MSO2014

MSO2012

The DPO2000 and MSO2000 Series Digital Phosphor and Mixed Signal

cilloscopes Service Manual, part number 071-2331-XX, is available on the

Os

Tektronix Web site at www.tektronix.com/manuals.

24

DPO2000 and MSO2000 Series Declassification and Security Instructions iii