
2-PC Protective Case Instructions
The 2-PC includes a soft carrying case, a protective case that fits around the outside edges of the instrument, and a kickstand.
Item Description
1 Soft carrying case includes two interior zipper pockets, rear slip pocket, and shoulder strap.
2 Synthetic rubber protective case. Provides extra protection against drops, increased grip, and carrying handle.
3 Kickstand provides a hands-free option to position your instrument at an angle on a work surface.
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are
protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued
and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges
reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
• In North America, call 1-800-833-9200.
• Worldwide, visit to www.tek.com find contacts in your area.
Warranty
For warranty information, go to www.tek.com/warranty-status-search
Copyright © Tektronix
tek.com
*P071379200*
071-3792-00

Soft carrying case description
Soft carrying case description
Item Description
1 Area designated for one 2 Series MSO instrument. Fits an instrument with protective case and kickstand installed.
2 Two storage pockets. Fits accessories like the power supply, probes, and cables.
3 Shoulder strap for case transit.
4 Rear slip pocket for cables, probes, or documentation.
Install the protective case
Procedure
1. Install the protective case from the back of the instrument, stretching it over 3 corners.
Stretch one corner over the back of the instrument at a time.
2. Stretch the last corner of the protective case over the instrument.
2