Tektronix 2268-RMK-1 User manual
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
A INITIAL RELEASE PER EC-010033 10/06/14 G. STAPP
13
UNIT
DENOTE SIZE m-N in-lb
A M3 0.8 - 0.9 7 - 8
B M4 1.8 - 2.0 16 - 18
C 8-32 2.0 - 2.2 18 - 20
ITEM PART NUMBER DESCRIPTION QTY
10 9370378-02R CHASSIS,6-40V,GREY 1
13 9370381-02R COVER,TOP,GREY 1
21 110-M3F-05 SCREW,M3 X 5,PFH,SS 22
A
58 9370071-02R BRACKET,RACK MTG,GREY 2
59 MH-8125-BA HANDLE,RND,1.25",AL,BLK,ANODZ 2
60 110EG20-08 SCREW,8-32 X .500,PFH,100D,SS 4
C
61 060-3029 SCREW,M4X6,FLAT,PHIL,SS,DIN965 4
B
73 9370427-02R PLATE,RK MNT CONN,GREY 1
74 9370072-02R PLATE,FRONT,RACK KIT,GREY 1
75 109-704-25 FOAM,1 INCH,SQ,ADH,2-SIDE,WHT 2
21
8X
ASSEMBLY STEPS: (UNIT CAN BE INSTALLED EITHER LEFT OR RIGHT SIDE)
INSTALL THE FRONT COVER PLATE, ITEM 74, TO THE CHASSIS, ITEM 10,1.
USING (2X) M3 SCREWS, ITEM 21.
INSTALL THE TOP COVER, ITEM 13, TO THE CHASSIS USING (8X) M3 SCREWS, 2.
ITEM 21.
2X .125
INSTALL THE CONNECTOR PLATE, ITEM 73, TO THE UNDERSIDE OF 3.
BOTH CHASSIS USING (12X) M3 SCREWS, ITEM 21.
INSTALL THE HANDLES, ITEM 59, TO THE RACK BRACKETS, ITEM 58,4.
3.0
2X75
USING (4X) 8-32 FLAT HEAD SCREWS, ITEM 60.
INSTALL THE RACK BRACKETS USING (4X) M4 FLAT HEAD SCREWS, ITEM 61.5.
NOTE UNLESS OTHERWISE SPECIFIED:
USE RECOMMENDED TORQUE FOR ALL FASTENERS. 1.
3.0
10
73
212X
60
4X
74
21
5859
2X2X12X
61
4X
ASSEMBLY INSTRUCTION, RACK MOUNT,SINGLE, PAGE 1 OF 2 October 06, 2014 Document No.
071338600
Rev A
UNITS
DENOTE SIZE m-N in-lb
A M3 0.8 - 0.9 7 - 8
B M4 1.8 - 2.0 16 - 18
C 8-32 2.0 - 2.2 18 - 20
ITEM PART NUMBER DESCRIPTION QTY
- - - -
- - - -
21 110-M3F-05 SCREW,M3 X 5,PFH,SS 12
A
58 9370071-02R BRACKET,RACK MTG,GREY 2
59 MH-8125-BA HANDLE,RND,1.25",AL,BLK,ANODZ 2
60 110EG20-08 SCREW,8-32 X .500,PFH,100D,SS 4
C
61 060-3029 SCREW,M4X6,FLAT,PHIL,SS,DIN965 4
B
73 9370427-02R PLATE,RK MNT CONN,GREY 1
- - - -
75 109-704-25 FOAM,1 INCH,SQ,ADH,2-SIDE,WHT 2
ASSEMBLY STEPS:
INSTALL THE CONNECTOR PLATE, ITEM 73, TO THE UNDERSIDE OF 1.
BOTH CHASSIS USING (12X) M3 SCREWS, ITEM 21.
INSTALL THE HANDLES, ITEM 59, TO THE RACK BRACKETS, ITEM 58,2.
USING (4X) 8-32 FLAT HEAD SCREWS, ITEM 60.
73
3.0
3.0
75
2X
60
2X .125
4X
INSTALL THE RACK BRACKETS USING (4X) M4 FLAT HEAD SCREWS, ITEM 61.3.
NOTE UNLESS OTHERWISE SPECIFIED:
USE RECOMMENDED TORQUE FOR ALL FASTENERS. 1.
61
4X
5921
58
2X2X12X
ASSEMBLY INSTRUCTION, RACK MOUNT,DUAL, PAGE 2 OF 2 October 06, 2014 Document No.
071338600
Rev A
Loading...