Tektronix 1757 User manual

Keithley Instruments

28775 Aurora Road
Cleveland, Ohio 44139
1-800-935-5595

tek.com/keithley

Model 1757 Test Lead Kit

General Purpose Test Lead Information

077144200 / April 2018 *P077144200* 1

Description

These test leads allow you to make measurements.

▪ Standard probe (quantity: 2)

These test leads should only be used by qualified personnel who recognize shock hazards
and are familiar with the safety precautions required to avoid possible injury.

The test lead's ratings may be greater than those of the instrument. Do not exceed the ratings
of the instrument. Also, do not exceed the maximum signal levels of this accessory (as
defined in the Characteristics paragraph) or any attached instrument.

Inspect the probes, lead insulation, and insulating sheaths for wear, cracks, or breaks before
each use.

For maximum safety, never touch or change the leads or power connections when power is
applied to the circuit under test.

Always turn off test system power and discharge all capacitors before connecting or
disconnecting the leads.

To prevent exposed voltages or shorting between connections, make sure both ends of the
cables are properly connected before applying power.

Model 1757 Test Lead Kit General Purpose Test Lead Information

2 077144200 / April 2018

Characteristics

Standard probe specifications

Characteristic

Specification

Category

Maximum voltage

1000 V

II Maximum voltage

600 V

III

Dimensions

Standard probe: