Teka TKD 1481, TKD 1491, TKD 1500 User guide

TKD 1481 / TKD 1491 / TKD 1500

CONTENTS

SAFETY INSTRUCTIONS

Safety Instructions ..................................................

INSTALLATION

Product Description ................................................

Installation ...........................................................

OPERATION

Quick Start .............................................................

Before Each Washing ..............................................

Detergent Dispenser ...............................................

Control Panel .........................................................

Programmes............................................................

Option....................................................................

MAINTENANCE

Cleaning and Care .................................................

Trouble Shooting ....................................................

Technical Specifications .........................................

Product Fiche ........................................................

2

9

10

13
15
16
18
20
26

30
33
34
35

1

SAFETY INSTRUCTIONS

Safety Instructions

Please read the following safety information thoroughly and follow it
strictly to minimize the risk of fire or explosion, electric shock and to
prevent property damage, personal injury or loss of life. Failing to follow
these instructions shall void any warranty.

！

Warning!

This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
death or serious injuries unless it’s avoided.

Caution!

This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries or damage to property and the
environment.

Note!

This combination of symbol and signal word indicates
a potentially dangerous situation which may result in
slight or minor injuries.

！

Warning!

ELECTRIC SHOCK HAZARD

•If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.

•If the machine is damaged, it must not be operated unless repaired by
the manufacturer, its service agent or similarly qualified persons.
Risk of electric shock!

2

SAFETY INSTRUCTIONS

•The appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.

•Children should be supervised that they do not play with the
appliance.

•Children 3 years and under shall be kept away from the appliance
or continuously supervised.

•Animals and children may climb into the machine. Check the
machine before every operation.

•Do not climb or sit on the appliance.

INSTALLATION LOCATION AND SURROUNDING

•All washing and additional substances are to be kept in a safe place
out of the reach of children.

•Do not install the machine on a carpet floor. The obstruction of the
openings by a carpet can damage the machine.

•Keep the appliance clear from heating sources and direct sunlight
to avoid plastic and rubber parts to corrode.

•Do not use the appliance in humid environments or rooms
containing explosive or caustic gas. In case of water leakage or
water splashes let the appliance dry in the open air.

•The appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of the
washing machine.

3

SAFETY INSTRUCTIONS

•Do not operate the machine in rooms with a temperature of below
5°C. This can cause damages to parts of it. If it is unavoidable, make
sure to drain the water completely from the appliance after every
use (see “Maintenance - Cleaning of drain pump filter“) to avoid
damages caused by frost.

•Never use flammable sprays or substances in the immediate
proximity of the appliance.

INSTALLATION

•Remove all packaging material and transport bolts before using the
appliance. Otherwise, serious damage may result.

•This appliance is equipped with a single inlet valve and can be
connected to the cold water supply only.

•Mains plug must be accessible after installation.

•Before washing clothes for the first time, the product shall be

operated once throughout all the procedures without any clothes
inside.

•Before using the washing machine, the product shall be calibrated.

•Do not put any excessively heavy objects on the appliance, like

water containers or heating devices.

•The new hose-sets supplied with the appliance are to be used and
that old hose-sets should not be reused.

•Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05
MPa.

ELECTRICAL CONNECTION

•Make sure the supply cable is not trapped by the machine, it can get
damaged.

•Connect the product to a grounded outlet protected by a fuse
complying with the values in the “ Technical specifications“ table.
The grounding installation has to be made by a qualified electrician.
Ensure that the machine is installed in accordance with the local
regulations.

4

SAFETY INSTRUCTIONS

•Water and electrical connections must be carried out by a qualified
technician in accordance with the manufacturer‘s instructions and
local safety regulations.

！

Warning!

•Don´t use multiple plugs or extension cords.

•The appliance must not have an external switching device such as a timer or

connected to a circuit that is regularly switched on and off.

•Do not pull the plug out of the mains outlet if there is flammable gas around.

•Never pull out power plug with wet hands.

•Always pull at the plug, not at the cable.

•Always unplug the appliance if it is not being used.

WATER CONNECTIONS

•Check the connections of the water inlet tubes, the water tap and
the outlet hose for possible problems due to changes of water
pressure. If the connections loosen or leak close the water tap and
get it repaired. Do not use the appliance before the pipes and hoses
are installed properly by qualified persons.

•Glass door may become very hot during the operation. Keep
children and pets far away from the machine while it is operating.

•The water inlet and outlet hoses have to be safely installed and
remain undamaged. Otherwise, water leakage can occur.

•Do not remove the drain pump filter while there is still water in the
appliance. Big quantities of water can leak out, and there is a risk of
scalding due to hot water.

5

SAFETY INSTRUCTIONS

OPERATION AND MAINTENANCE

•Never use any flammable, explosive or toxic solvents. Do not use
gasoline and alcohol etc. as detergents. Only select detergents that
are suitable for machine washing.

•Make sure that all pockets are emptied. Sharp and rigid items such
as coins, brooches, nails, screws, stones etc. may cause serious
damages to this machine.

•Remove all objects from pockets such as lighters and matches
before use the appliance.

•Thoroughly rinse items that have been washed by hand.

•Items that have been soiled with substances such as cooking oil,

acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax
and wax removers should be washed in hot with an extra amount of
detergent before being dried in the appliance.

•Items containing foam rubber (latex foam), shower caps, water
proof textiles, rubber backed articles and clothes or pillows fitted
with foam rubber pads should not be dried in the machine

•Fabric softeners or similar products should be used as
recommended in their instructions.

•Never try to open the door forcefully. The door will unlock shortly
after the end of a cycle.

•Please do not close the door with excessive force. If it is found
difficult to close the door, please check if the clothes are properly
inserted and distributed.

6

SAFETY INSTRUCTIONS

•Always unplug the appliance and close the water tap before
cleaning and maintenance and after each use.

•Never pour water over the appliance for cleaning purpose. Risk of
electric shock!

•Repairs shall only be carried out by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard. The
producer will not be responsible for damages caused by the
intervention of not authorized persons.

TRANSPORT

•Before Transport:

-Bolts shall be reinstalled to the machine by a specialized person

-Accumulated water shall be drained out of the machine

•This appliance is heavy. Transport with care. Never hold any
protruding part of the machine when lifting. The machine door
cannot be used as a handle.

INTENDED USE

The product is intended only for home use and for textiles in
household amounts suitable for machine washing and drying. This
appliance is for indoor use only and not intended for built in use.
Only use according to these instructions. The appliance is not
intended for commercial use.
Any other use is considered as improper use. The producer is not
responsible for any damage or injuries that may result of it.

•This appliance is intended to be used in household and similar
applications such as:

-Staff kitchen areas in shops, offices and other working environments;

-Farm houses;

-By clients in hotels, motels and other residential type environments;

-Bed and breakfast type environments;

-Areas for communal use in blocks of flats or in launderettes.

7

SAFETY INSTRUCTIONS

Packaging/Old appliance

This marking indicates that this product should not be
disposed with other household wastes throughout the
EU.To prevent possible harm to the environment or

human health from uncontrolled waste disposal,recycle
it responsibly to promote the sustainable reuse of

material resources.To return your used device, please use
the collection systems or contact the retailer where the
product was purchased. They return and can take this
product for environmental safe recycling.

8

INSTALLATION

Product Description

Water supply hose

Top cover

Control panel

Detergent dispenser

Door

Power supply cord

Note!

• The product picture is for illustration only, please refer to real product as
reference.

Accessories

Drum

Service flap

Drain hose

4 x Cover caps

1 x Supply hose
cold water

1 x Owner’s manual

9

INSTALLATION

Installation

Installation area

！

Warning!

• Stability is important to prevent the product from
wandering! Make sure the machine is standing leveled and
stable.

• Make sure that the product does not stand onto the power
cord.

• Make sure to maintain the minimum distances from the
walls as shown in the picture

Before installing the machine, the location characterized
as follows shall be selected:

1.Rigid, dry, and level surface

2.Avoid direct sunlight

3.Sufficient ventilation

4.Room temperature is above 0°C

5.Keep far away from the heat sources such as coal or gas burning appliances.

Unpacking the washing machine

！

Warning!

• Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.

• There is a risk of suffocation ! Keep all packaging
well away from children.

w

W> 20mm

w

a

1. Remove the cardboard box and styrofoam packing.

2. Lift the washing machine and remove the base packaging.Make sure the small triangle
foam (a) is removed with the bottom packaging together. If not, lay the unit down on
the side surface and remove it manually.

3. Remove the tape securing the power supply cord and drain hose.

4. Remove the inlet hose from the drum.

10

INSTALLATION

Remove transport bolts

！

Warning!

• You must remove the transport bolts from the backside before using the product.

Loosen the 4 transport
bolts with a spanner.

Remove the bolts
including the rubber parts
and keep them for future
use.

Close the holes using the
cover caps.

Levelling the washing machine

！

Warning!

• The lock nuts on all four feet must be screwed tightly against the housing.

1. Loosen the lock nut.

2. Turn the foot until it reaches the floor.

3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.

Connect the water supply hose

！

Warning!

To prevent leakage or water damage, follow the instructions in this chapter

• Do not kink, crush or modify water inlet hose.

Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.

Note!

• Connect manually, do not use tools. Check if the connections are tight.

11

INSTALLATION

Drain Hose

！

！

Warning!

Warning!

•

Do not kink or protract the drain hose.

• Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.

10

12

OPERATION

Quick Start

Caution!

• Before washing, please make sure the washing machine is installed properly.

• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.

Calibration

It’s recommended to calibrate the washing machine, so that provide the best
performance.
The appliance is able to detect the amount of laundry loaded. This function is
optimizing the product performance by minimizing energy and water
consumption, saving you money and time. For this reason it’s recommended to
calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washing machine and press “Delay” and “Spin”
simultaneously for 10 seconds until “t19” is displayed;
4- Press [ ] to start the appliance and wait till “****” is displayed.

10

13

OPERATION

1. Before Washing

1 2 3 4 5

eart h
ter mi na l

Plug in

Open tap

Load

Close door

Note!

• Detergent need to be added in compartment I if the pre-wash function is selected.

2. Washing

1

2 3 4

Main
wash

Soften er

Prewash

Add detergent

Power On

Select programme

3. After Washing

Buzzer beep and “End” on display.

Select function or
remain default
settings

10

14

Press
Start/Pause to
start the program

OPERATION

• The ambient temperature of the washing machine should be 5-40°C. If used under
0°C, the inlet valve and draining system may be damaged. If the machine is
installed under freezing conditions, it should be transferred to normal ambient
temperature to ensure the water supply hose and drain hose can unfreeze before
use.

• Please check your laundry care labels and the detergent use instructions before
wash. Use non-foaming or less-foaming detergent suitable for machine
washing properly.

Before Each Washing

1 2 3

Check the care label

Sort laundry according to
color and textile type

Take all items out of the
pockets

4 5 6

Tie together long textile
strips and belts, close zips
and button

！

Warning!

• Do not wash or dry articles that have been cleaned in, washed in, soaked in,
or dabbed with combustible or explosive substances like wax, oil, paint,
gasoline, alcohol, kerosene, and other flammable materials.

• Washing single clothes items may easily create big eccentricity and cause
alarm due to unbalance. Therefore it is suggested to add one or two more
laundry items to the wash so that spin can be done smoothly.

Put small items into a
laundry bag

10

15

Turn easy-pilling and
long-pile fabric inside out

OPERATION

Detergent Dispenser

I

Pre wash

II

Main wash
Softener

Release button to
pull out the dispenser

Caution!

• Detergent only need to be added in "compartment I “after selecting
pre-wash function.

Programme
Cotton

Synthetic
Baby Care
Jeans
Mix
20℃
Rinse & Spin
Spin Only

Programme
Intensive

ECO 40-60
Delicate
Wool
Sport Wear
Rapid 45'
Quick 15'

Means must ○　Means optional

16

10

OPERATION

Detergent Recommendation

Reco mmend ed wash ing
det ergent

Heavy-duty deter gent with
bleaching agen ts a nd
optical bright en ers

Wash c ycles

Cotton ECO 40-60 Mix,

, ,

Jeans,Int en sive

Wash ing
tem p.

20/30
40/60

Type of laundry and textile

White laundry ma de f rom

/

boil-proof cot to n or linen

Colour deterge nt w ithout
bleaching agen t an d optical
brighteners

Color or mild dete rg ent
without optica l br ighteners

Mild washing detergent

Special wool det er gent

Cotton,ECO40 -6 0,Mix,
Jeans,Int en sive

Synthetic

Synthetic

Woo l

Cold/20/
30/40

Cold/20/
30/40

Coloured laund ry m ade
from cotton or lin en

Coloured laund ry m ade
from easy care fibre s or
synthetic mate ri als

20 30/

20 30/

Delicate texti le s, silk,
viscose

Woo l

Note!

•

Agglomerating or ropy detergent or additive can be diluted in some water
before pouring it into the detergent dispenser, to avoid its inlet to get blocked
and thus cause a water overflow.

• Please choose the suitable type of detergent to get a maximum of washing
performance and a minimum of water and energy consumption

• To achieve the best cleaning result a proper detergent dosing is important.

• Use a reduced detergent amount if the drum is not filled completely.

• Always adjust the amount of detergent to the water hardness, if your tap
water is soft, use less detergent.

• Dose according to how dirty your laundry is, less dirty clothes require less
detergent.

• Highly concentrated (compact detergent) requires particularly accurate
dosing.

Following symptoms are a sign of detergent overdosing:

- heavy foam formation

- poor washing and rinsing result

Following symptoms are a sign of detergent underdosing:

- laundry turns grey

- built-up of limescale deposits on the drum, the heating element and/or the
laundry

10

17

OPERATION

Control Panel

Model:TK D 1481/TKD 14 91

15

0

2

1

0

Pres s 3 sec to se t My Cycl e

Note!

4

5

3

2
1

• The chart is for reference only, Please refer to real product as standard.

1

On/Off

1

Product is switched On/Off.

3

Option

This allows you to select an additional

function and will light when selected.

5

Display

The display shows the settings, estimated time remaining, options, and status messages

for your washer. The display will remain on through the cycle.

CB

A

D

0

2

1

0

J

I

E

Pres s 3 sec to se t My Cycl e

H

G

2

Start/Pause

1

Press the button to start or pause the
washing cycle.

4

Programmes

Available according to the laundry type.

F

Delay

A

B

Door Lock

C

Child Lock

D

Reload

My Cycle

E

Rate Of Progress(Pre wash- Wash

J

F

-Rinse-Spin)

Wash Time Delay Time

K

Error End

FK

Pre Wash

G

Extra Rinse

Speed Wash

H

Spin Speed

I

1
1

18

10

OPERATION

Control Panel

Model:TK D 1500

15

4

5

150 0

2

1

3

Pres s 3 sec to se t My Cycl e

2

1

0

0

Note!

 The chart is for reference only, Please refer to real product as standard.

1

On/Off

1

Product is switched On/Off.

3

Option

This allows you to select an additional

function and will light when selected.

5

Display

The display shows the settings, estimated time remaining, options, and status messages

for your washer. The display will remain on through the cycle.

2

Start/Pause

1

Press the button to start or pause the
washing cycle.

4

Programmes

Available according to the laundry type.

1

1

CB

A

D

15 00

0

2

1

0

E

Pres s 3 sec to se t My Cycl e

F

Delay

A

B

Door Lock

C

Child Lock

D

Reload

My Cycle

E

Rate Of Progress(Pre wash- Wash

J

F

Pre Wash

G

Extra Rinse

Speed Wash

H

Spin Speed

I

-Rinse-Spin)

Wash Time Delay Time

K

Error End

J

H

I

G

19

FK

10

OPERATIONS

Programmes

Model:TK D 1481/TKD 14 91/TKD 1500

Programme

Cotton

Synthetic

Baby Care

Jeans

Mix

20℃

Rinse&Spin

Spin Only

Intensive

ECO 40-60

Delicate

Wool

Sport Wear

Rapid 45

Quick 15'

Load(kg) Default Time

8.0

8.0

4.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

8.0

2.0

8.0

2.0

2.0

9.0

9.0

4.5

9.0

9.0

9.0

9.0

9.0

9.0

9.0

9.0

9.0

2.0

9.0

2.0

2.0

10.0

10.0

5.0

10.0

10.0

10.0

10.0

10.0

10.0

10.0

10.0

10.0

2.0

10.0

2.5

2.5

8.0/9.0/10.0

3:39

3:17

1:42

1:35

1:20

1:01

0:20

0:12

3:48

3:32/3:41/3:53

0:50

1:07

0:45

0:45

0:15

Note!

• The parameters in this table are only for user's reference. The actual parameters

maybe different with the parameters in above mentioned table.

10

20

OPERATION

Programmes

TKD 1481

Cycle

20℃ 4.0 1:01 0.15 50 20 65% / 1000
Cotton(60℃） 8.0 3:44 1.498 70 60 53% / 1400
Intensive 8.0 3:48 1.100 70 40 70% / 800
Mix 8.0 1:20 0.75 65 40 70% / 800
Quick 15' 2.0 0:15 0.030 40 Cold 75% / 800

ECO 40-60

kg

Cycle duration in

Nominal capacity in

8.0 3:38 0.857 59 34 53%/1400

4.0 2:48 0.504 46 29 53%/1400

2.0 2:48 0.24 37 21 53%/1400

hours and minutes

cycle

in kWh/operalling

Energy consumption

cycle

Water consumption

in mliter//operalling

℃

Highest

temperature ature

% /spin speed

residualmoitsure in

• The above data is for reference only, and the data may change due to different

actual use conditions.

• The valves given for programmes other than the ECO 40-60 programme

are indicative only.

• Concerning to Regulation(EU) No 1061/2010,
The EU energy efficiency class is: A+++

Energy test program: Intensive 60/40 ; Speed:The highest speed;

℃

Other as the default.
Half load for 8.0Kg machine:4.0Kg.

• Concerning to Regulation(EU) 2019/2023,
The EU energy efficiency class is: B

Energy test program: ECO 40-60. Other as the default.
Half load for 8.0Kg machine:4.0Kg.
Quarter load for 8.0Kg machine:2.0Kg.

21

10

OPERATION

Programmes

TKD 1491

Cycle

℃

20
Cotton(60℃） 9.0 3:44 1.603 75 60 53% / 1400
Intensive 9.0 3:48 1.205 76 40 70% / 800
Mix 9.0 1:20 0.8 75 40 70% / 800
Quick 15' 2.0 0:15 0.030 40 Cold 75% / 800

ECO 40-60

kg

Cycle duration in

Nominal capacity in

4.5 1:01 0.2 55 20 65% / 1000

9.0 3:48 0.935 62 34 53%/1400

4.5 2:54 0.63 48 34 53%/1400

2.5 2:54 0.22 39 21 53%/1400

hours and minutes

cycle

in kWh/operalling

Energy consumption

cycle

Water consumption

in mliter//operalling

℃

Highest

temperature ature

% /spin speed

residual moitsure in

• The above data is for reference only, and the data may change due to different

actual use conditions.

• The valves given for programmes other than the ECO 40-60 programme

are indicative only.

• Concerning to Regulation(EU) No 1061/2010,
The EU energy efficiency class is: A+++

Energy test program: Intensive 60/40 ; Speed:The highest speed;

℃

Other as the default.
Half load for 9.0Kg machine:4.5Kg.

• Concerning to Regulation(EU) 2019/2023,
The EU energy efficiency class is: B

Energy test program: ECO 40-60. Other as the default.
Half load for 9.0Kg machine:4.5Kg.
Quarter load for 9.0Kg machine:2.0Kg.

22

10

OPERATION

Programmes

TKD 1500

Cycle

20℃ 5.0 1:01 0.25 60 20 65% / 1000
Cotton(60℃） 10.0 3:44 1.708 80 60 53% / 1500
Intensive 10.0 3:48 1.305 80 40 70% / 800
Mix 10.0 1:20 0.85 80 40 70% / 800
Quick 15' 2.0 0:15 0.030 40 Cold 75% / 800

ECO 40-60

kg

Cycle duration in

Nominal capacity in

10.0 3:59 1.062 73 38 53%/1500

5.0 3:00 0.672 53 38 53%/1500

2.5 3:00 0.235 38 23 53%/1500

hours and minutes

cycle

in kWh/operalling

Energy consumption

cycle

Water consumption

in mliter//operalling

℃

Highest

temperature ature

% /spin speed

residual moitsure in

• The above data is for reference only, and the data may change due to different

actual use conditions.

• The valves given for programmes other than the ECO 40-60 programme

are indicative only.

• Concerning to Regulation(EU) No 1061/2010,
The EU energy efficiency class is: A+++

Energy test program: Intensive 60/40 ; Speed:The highest speed;

℃

Other as the default.
Half load for 10.0Kg machine:5.0Kg.

• Concerning to Regulation(EU) 2019/2023,
The EU energy efficiency class is: B

Energy test program: ECO 40-60. Other as the default.
Half load for 10.0Kg machine:5.0Kg.
Quarter load for 10.0Kg machine:2.5Kg.

23

10

OPERATION

Programmes

Programmes are available according to the laundry type.

Hard-wearing textiles, heat-resistant textiles made of cotton or

Synthetic

Baby Care

Jeans
Mix

20℃
Rinse&Spin
Spin Only
Intensive
ECO 40-60

Delicate

Wool

Sport Wear
Rapid 45'

Quick 15'

linen.
Wash synthetic articles, for example: shirts, coats, blending.
While washing the knitting textiles, detergent quantity shall be
reduced due to its loose string construction and easily forming
bubbles.
Keep the washing temperature above 60 degrees for more than
30 minutes, effectively remove harmful bacteria.
Specially for jeans.
Mixed load consisting of textiles made of cotton and synthetics.
20℃ default, can choose cold water.
Extra rinse with spin.
Extra spin with selectable spin speed.
To increase the washing effects, washing time is increased.
This program is specially designed for washing duvet coats..
Default 40℃,not selectable,suitabale for laundry washing at
about 40℃-60℃.
For delicate, washable textiles, e.g. made of silk, satin, synthetic
fibres or blended fabrics.
Hand or machine-washable wool or richwool textiles.Especially
gentle wash programme to prevent shrinkage, longer
programme pauses (textiles rest in wash liquor).
Washing the activewear.
This programme is suitable for washing not very dirty clothes, save
more energy and washing.
Extra short programme approx, suitable for lightly soiled
washing as a small amounts of laundry.

24

10

OPERATION

1) The highest temperature reached by the laundry in the wash cycle for at least 5
minutes.

2) Residual moisture after the wash cycle in water content percent and the spin speed at
which this was achieved.

3) The ECO 40-60 programme is able to clean normally soiled cotton laundry declared to
be washable at 40°C or 60°C, together in the same cycle. This programme is used to
assess the compliance with the regulation (EU) 2019/2023.

The most efficient programmes in terms of energy consumption are generally those that
perform at lower temperatures and longer duration.

Loading the household washing machine up to the capacity indicated for the respective
programmes will contribute to energy and water savings.

Noise and remaining moisture content are influenced by the spinning speed: the higher
the spinning speed in the spinning phase, the higher the noise and the lower the
remaining moisture content.

Caution!

• If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme. The machine will continue
the programme when the power supply is re-established.

10

25

OPERATION

Option

Quick 1 5’

Rapid 4 5'

Sport Wear

Woo l

Delic at e

ECO 40- 60

Inten si ve

Spin On ly

Rinse & S pi n

20℃

Mix

Jeans

Baby Ca re

Synth et ic

Def ault
Temp. (℃)

Cold

40

20

40

30

--

40

--

--

20

40

30

60

40

1400

800

800

800

600

600

1400

800

1000

1000

1000

800

1000

800

1200

Def ault sp in
spe ed in rpm

1500

800

800

800

600

600

1500

800

1000

1000

1000

800

1000

800

1200

Cotto n

40

1400

1500

Note!

•

For the maximum spin speed, program time, and other details of the

ECO 40-60 program, please refer to the content on the Product Fiche page.

• The table shows which cycle offers which options for adjustment. If an
adjustment is not possible for a cycle.

10

26

OPERATION

Delay

Set the Delay function:

1. Select a programme; 2.Press the Delay button to choose the time(the delaying time is 0-24 H.);

3.Press [Start/Pause] to commence the delay operation

Delay

Choose the Programme

Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before starting the
programme. If the programme already started, should switch off programme to reset a new one.

StartSetting time

Caution!

• If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is
restarted, the program will continue.

Pre Wash

The Prewash function can get an extra wash before main wash,it is suitable for washing the
dust rises to surface of the clothes;You need to put detergent into the Case (I) when select it.

Speed Wash

The function can decrease the washing time.

Extra Rinse

The laundry will undergo extra rinse once after you select it.

My Cycle

To memory the frequently used programme.
After choosing the programme and setting the options, press [Spin] 3 sec. before
start to wash.The default setting course is Cotton.

Temp.

Press the button to regulate the temperature(Cold,20℃,30℃,40℃,60℃,90℃)

Spin

Spin

Press the button to change the speed.

27

10

OPERATION

Reload

This operation can be executed during the washing progress. When the drum is
still rolling and there is large amount of water with high temperature in the drum.
The state is unsafe and the door cannot be opened forcefully. To press

[Start/Pause] for 3 sec. to reload, and start the clothes adding in the midway

function. Please follow the steps as bellow:

1.Wait until the drum stops rotation.

2.The door lock is unlocked.

3.Close the door when the clothes are reloaded and press the [Start/Pause]

button.

Clothes

P 3sress[Start/Pause] ec.

Reload the clothes

Start

Child Lock

To avoid mis operation by children.

Extra
Rinse

Pre

Wash

Press [Extra Rinse] and [Pre Wash]
3 sec. till buzzer beep.

Caution!

When child lock is activated and program starts, child lock indicator will switch on,
and the CL and remaining time on the display are alternately displayed in 0.5s.
Press the other buttons will make child lock indicator flash for 3s. when program
finish,CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s

• Only press and hold the two button can release child lock, even power off,
switch off and program end

• The "Child Lock" will lock all buttons except Power button and Child Lock
button

• Please release child lock before selecting program and staring washing

28

10

OPERATION

Mute the buzzer

Temp.

Choose the Programme

To act the buzzer function, press the button again for 3 seconds. The setting
will be kept until the next reset.

Caution!

Spin

Press the [Temp.]and[Spin] for 3sec.,
the buzzer is mute.

 After Muting the buzzer function, the sounds will not be activated any more.

29

10

MAINTENANCE

Cleaning and Care

！

Warning!

• Always unplug the appliance and close the water tap before cleaning and
maintenance.

Cleaning the Cabinet

Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use a cloth to wipe it off immediately.
Never use sharp items to clean the appliance.

Caution!

• Never use abrasive or caustic agents. formic acids or its diluted solvents or
similar substances, like alcohol or chemical products.

Cleaning the Drum

Any rust stains left inside the drum by metal articles must be removed immediately
using chlorine-free detergents. Never use steel wool for cleaning the drum!

Note!

• Keep any laundry away from the machine while cleaning the drum.

Cleaning the Door Seal and Glass

Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up it
can cause leakages.
Remove any coins, buttons and other objects
from the seal after each wash.
Clean the Door Seal and Glass every month to
ensure the normal operation of the appliance.

10

30

MAINTENANCE

Cleaning the Inlet Filter

Note!

• Diminishing water flow is a sign that the filter need to be cleaned.

1. Close the tap and remove the water supply
hose from it.

2. Clean the filter with a brush.

3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.

4. Use a brush to clean the filter.

5. Reinstall the filter to the water inlet and
reconnect the water supply hose.

6. Clean the Inlet filter every 3 months

to ensure the normal operation of the
appliance.

1 2

3 4

Clean The Detergent Dispenser

1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.

2. Lift the softener cover off the dispenser drawer and wash both items with water.

3. Restore the softener cover and push the drawer back into the recess.

1

2

3

4

Press the release and
remove the dispenser
drawer

Clean the dispenser
drawer and the softener
cover under water

Clean the recess with
an soft brush

Insert the dispenser
drawer

Note!

• Do not use abrasive or caustic agents to clean plastic parts.

• Clean the detergent dispenser every 3 months to ensure the normal operation of the
appliance.

10

31

MAINTENANCE

Cleaning the Drain Pump Filter

Warning!

•

Make sure that the machine has finished the washing cycle and is empty. Switch it off

and unplug it before cleaning the drain pump filter.

• Be careful of hot water. Allow the water to cool down. Risk of scalding!

• Clean the filter periodically every 3 months to ensure the normal operation of the
appliance.

Open the lower cover cap

Remove extraneous matter

1

Open the filter by turning
to the counter clockwise

3

Close the lower cover cap

2

4

Caution!

• Make sure emergency drain hose cap and the emergency drain hose are reinstalled
properly, otherwise water may leak.

32

10

MAINTENANCE

Trouble Shooting

Whenever there is a problem with the appliance, check if you can solve it following
the tables below. If the problem persists, please contact the customer service.

Description

Appliance does
not start

Door can´t be
opened

Water leakage

Detergent residues
in the detergent
dispenser

Indicator or display
does not work

Abnormal noise

Error Codes

Description

Possible cause

Door is not closed properly.
Clothes are stuck.

Safety protection
is activated.

Connections are
not tight enough.

Detergent is damp
and/or clotted.

PC board or harness have
connection problems.

Fixing bolts still in place.
Floor is not solid or level.

Possible cause

Door is not closed properly

Water injecting
problem during
wash cycle.

Overtime water draining

Solution

Close the door properly and
restart.
Check the laundry.

Disconnect the power and
restart.

Check and fasten the water inlet
pipe.
Check and clean the outlet hose.

Clean and wipe the detergent
dispenser dry.

Switch off the power and check
if the mains plug is connected
properly.

Check if the fixing bolts have
been removed
Make sure the appliance is
installed on a solid and level
floor.

Solution

Close the door properly and
restart.
Check if the water pressure
is high enough.
Straighten the water pipe.
Clean the inlet valve filter.

Check the drain hose for blockage.

Water overflow

Others

33

Restart the appliance.

Restart the appliance. If problem
persists, please contact the
customer service.

10

MAINTENANCE

Customer service

Spare part for your appliance are available for a minimum of 10 years.
In case of questions please contact our customer service at:

！

Warning!

Risk of electric shock

• Never try repair an appliance which is defective of presumed to be defective.
You may put your own and future users' lives in danger.Only authorised specialists are
allowed to carry out this repair work.

• Improper repair will void the warranty and subsequent damages can't be recognized!

Transport

IMPORTANT STEPS WHEN MOVING THE APPLIANCE

Unplug the appliance and close the water inlet tap.

•

• Check, if the door and the detergent dispenser are closed properly.

• Remove the water inlet pipe and the outlet hose from the house installations.

• Let the water drain completely from the appliance (see “Maintenance Cleaning the
drain pump filter”)

• Important: Re-install the 4 transport bolts in the back of the appliance.

• This appliance is heavy. Transport with care. Never hold any protruding part of the
machine when lifting. The machine door cannot be used as a handle.

Technical Specifications

Power Supply

MAX.Current

Standard Water Pressure

TKD 1481
TKD 1491
TKD 1500

220-240V~,50Hz

10A

0.05MPa~1MPa

8. 0kg

9. 0kg

10.0kg

34

595* 565*850
595*565*850
595*565*850

H

W

68kg
71kg
72kg

D

2000W
2000W
1950W

MAINTENANCE

Product fiche concerning to EN 60456:2016 With (EU)No.1061/2010.

TKD 14 81

8

A+++

Intensive

Intensive

175

11000

Intensive

Intensive

Intensive

Intensive

Intensive

Intensive

Intensive

0.82kwh

0.75kwh

0.73kwh

1400

53%

Intensive

280min

270min

270min

1min

Energy test progra m: Intensive Speed: the highest speed; Other as the default.60/40 ℃ ;

57

79dB

10241035

MAINTENANCE

TKD 14 81

10241036

MAINTENANCE

Product fiche concerning to EN 60456:2016 With (EU)No.1061/2010.

TKD 14 91

9

A+++

Intensive

Intensive

174

11880

Intensive

Intensive

Intensive

Intensive

Intensive

Intensive

Intensive

0.85kwh

0.71kwh

0.70kwh

1400

53%

Intensive

270min

270min

265min

1min

Energy test prog ra m: Intensive Speed: the highest speed; Other as the default.60/40 ℃ ;

57

79dB

10241037

MAINTENANCE

TKD 14 91

10241038

MAINTENANCE

Product fiche concerning to EN 60456:2016 With (EU)No.1061/2010.

TKD 15 00

10

A+++

167

cotton

standard 60℃ cotton

standard 60℃ cotton

standard 40℃ cotton

12980

the standard cotton

Intensive Intensive

the standard 60℃ cotton

the standard 60℃ cotton

the standard 40℃ cotton

the standard

0.80kwh

0.70kwh

0.68kwh

1500

53%

285min

270min

270min

1min

57

79dB

Energy test prog ra m: Intensive Speed: the highest speed; Other as the default.60/40 ℃ ;

39

10

MAINTENANCE

TKD 15 00

10241040

MAINTENANCE

1) The actual energy consumption will depend on how the appliance is used.

2) The actual water consumption will depend on how the appliance is used and on the
hardness of the water.

3) Delivery of the spare parts within 15 working days after having received the order.

Product Data Sheet concerning (EU) 2019/2014

The product data sheet for your appliance can be found online.
Go to https://eprel.ec.europe.eu and enter the model identifier for your appliance to
download the data sheet.
The model identifier for your appliance can be found in the technical specifications
section.

10241041